MODEL:MIG-160＆MIG-200D3＆MIG-250＆MIG-270
Technical Suppo and E-Warranty Ceicate www.vevor.com/suppo
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate
of savings you might benet from buying ceain tools with us compared to the major top
brands and doses not necessarily mean to cover all categories of tools oered by us. You are
kindly reminded to verify carefully when you are placing an order with us if you are actually
saving half in comparison with the top major brands.
MODEL:MIG-160＆MIG-200D3＆MIG-250＆MIG-270
INVERTER WELDING
MACHINE
3-5
6-15
6-9
10-11
12-13
14-15
16-24
16-17
18-22
22-24
25
11
3-4
5
5
1.3 IMPORTANT SAFETY INSTRUCTIONS
1.3 IMPORTANT SAFETY INSTRUCTIONS
(WARNING: To reduce the risk of burns, electrocution, re or inju to persons!)
a) Do not disassemble the unit except for the authorized seiceman.
b) Unplug the unit before lling. Do not exceed the MAX mark.
c) Do not touch the socket with wet hand to reduce the risk of electrocution.
The welding machine is adopting the most advanced inveer technology, which is
suitable for gas welding (solid wire) and gasless welding (Flux-cored wire).
The development of inveer welding equipment prots from the development of the
inveer power supply theo and components. Inveer welding power source utilizes
high-power component lGBT to transfer 50/ 60HZ frequency up to 100KHZ, then reduce
the voltage and commutate, and output high-power voltage . Because of the great
reduction of the main transformer's weight and volume, the eciency increased by 30%.
The appearance of inveer welding equipment is considered to be a revolution for
welding indust.
Inside of the machine is equipped with electronic reactor circuit which can accurately
control the process of the electric sho transition and blending transition and result
excellent welding characteristic. Comparing with synergistic welding machine and other
machine, it has the following advantages: stable wire speed, compact body power
saving, no electromagnetic noise, continuous and stable operation with small cument. It
is especially suitable for welding sheet of low-carbon steel, alloyed steel and stainless
steel. It has some features, like automatic voltage pulsation compensation capability,
small sparkle, good arcing, uniform welding pool, high duty cycle and so on.
Thanks for purchasing product and hope for your precious advice. We will dedicate to
produce the best products and oer the best seice.
MIG-160/200D3/250/270
Single voltage series panel introduction
MMA/LIFT-TIG/MIG
Power indicator light
Switch mode
MMA/LIFT-TIG/MIG
MMA/TIG Welding current
adjustment
MIG voltage adjustment
MIG Wire speed adjustment
Positive polarity connector
Polarity conversion
cable connector
The power switch
Power cord with plug
Ground wire
Built-in coolingFan
and ventilaton
Overheating alarm
Welding current display
Welding Wire Inching
Welding voltage display
Negative polarity connector
MIG Welding gun
Note: Ve impoant!
1. Connect the polarity conversion cable connector to the posiive polarity connector when solid
carbon steel welding wire is usedGround wire clamp negative polanity connector!
2. Connect the polarity conversion cable connector to the negative polarity connection when
using the airless self-protective wire Connector, Ground wire clamp positve polarity connector !!
Trachea inlet connector
INPUT
AC220V±10%
50HZ
MIG-160
MIG-250/270
Dual voltage series panel introduction
MMA/LIFT-TIG/MIG
Switch mode
Welding current adjustment
MIG voltage adjustment
MIG Wire speed adjustment
Positive polarity connector
Polarity conversion
cable connector
Trachea inlet connector
The power switch
Power cord with plug
Ground wire
Built-in coolingFan
and ventilaton
Overheating alarm
Welding current display
Welding Wire Inching
Welding voltage display
Negative polarity connector
MIG Welding gun
MIG bum-back function
Power indicator light
IN P UT
AC110V/220V±10%
50/60HZ
MIG-250
Description for various functions
Item
Over-Heat Aam
Power Indicator
Welding Current Display
MIG Welding Voltage DisplayMIG
Switch for mode of mma/ift-tig/mig
Welding Wire Inching
MMA Welding Current Adjustrnent MMA
MIG Bumback Funcion MIG
MIG Voltage Adjustent MIG
MIG Wire Speed Adjustment MIG
Polarity Conversion Cable Connector
Positive Polarity Connector
Negative Polarity Connector
MIG Welding Torch
Power switch for onoFf
Gas hose Inlet Connector
Power Cable with Plug
Ground wire
Ground Nut
built-in cooling fan and ventilaton
Note
When temperature of the machine is too high,
this indicator will light and machine stop working.
While arc is struck (welding) displays actual
welding current.
While MIG mode display actual welding voltage.
Three kinds of welding models can be choose when
tum to diferent positon.
It can let welding wire reach contact tps in fast speed.
While MMA mode can adjust welding current from
small to big.
It can remove small ball after stopping welding .
While MIG mode can adjust voltage from low to high.
Stepless adjusment from slow to fast.
Integrated MIG TORCH or Binzel MIG Torch.
When use gas welding solid welding wire) ,
install gas hose into this connector.
When gas welding (solid wire) , install this into Positive
Polarity Connector When gasless welding Flux wire) ,
install this into Negative Polarity Connector.
/
/
/
/
/
/
/
/
MIG-160
MIG-200D3
MIG-250
MIG-270
Welding Holder
1 SET of TIG torch
Transparent
hose
Hose Clamp
3m Transparent hose
4m WP-17V TIG torch；
1PC TIG Alumina Nozzles Ceramic Cup
2PCS Collect
1PC for Long Cap
1PC for Sho Cap
1PC for Collect Holder
Used to x the trachea to
precent air leakage
3M MIG welding torch
5
6
Glasses
Eye protection
7
1
Welding Slag
Hammer and Bush
slag removal in
electric welding
8
1
Flux cored wire 1KG diameter 0.8mm9 1
1 SET of MIG torch
2PCS Gas nozzle
1PC Gas Diuser
1PC Spanner
MODEL:MIG-160＆MIG-200D3＆MIG-250＆MIG-270
Technical Suppo and E-Warranty Ceicate www.vevor.com/suppo
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate
of savings you might benet from buying ceain tools with us compared to the major top
brands and doses not necessarily mean to cover all categories of tools oered by us. You are
kindly reminded to verify carefully when you are placing an order with us if you are actually
saving half in comparison with the top major brands.
Manual
Normally provide in english
10
1
AC220V,110V/220V±10%.IT 220V
or 110V/220V
MIG-160
220V±10%
MMA:30±5A
MIG :25±5A
30-160A
12-26V(±5V)
60±5V
2.5~14
0.8/1.0
30%40°C
0.7
IP21S
F
460x185x300
13.68
MIG-200D3
220V±10%
MMA:30±5A
MIG :25±5A
30-200A
12-26V(±5V)
60±5V
2.5~14
0.8/1.0
30%40°C
0.7
IP21S
F
460x185x300
13.68
MIG-250
220V±10%
MMA:30±5A
MIG :25±5A
30-250A
12-26V(±5V)
60±5V
2.5~14
0.8/1.0
30%40°C
0.7
IP21S
F
460x185x300
13.68
MIG-270
220V±10%
MMA:30±5A
MIG :25±5A
30-270A
12-26V(±5V)
60±5V
2.5~14
0.8/1.0
30%40°C
0.7
IP21S
F
460x185x300
13.68
110V
220V
MIG-250
110V/220V±10%
MMA/MIG:50±5A;TIG:35±5A
MMA/MIG:30±5A;TIG:25±5A
30-250A
12-26V(±5V)
60±5V
2.5~14
0.8/1.0
30%40°C
0.7
IP21S
F
460x185x300
13.68
MIG-270
110V/220V±10%
MMA/MIG:50±5A;TIG:35±5A
MMA/MIG:30±5A;TIG:25±5A
30-270A
12-26V(±5V)
60±5V
2.5~14
0.8/1.0
30%40°C
0.7
IP21S
F
460x185x300
13.68
14.Trachea inlet connector
15.The power switch
16.Power cord with plug
17.Ground wire
18.Built-in coolingFan
and ventilaton
2.Power indicator light
4.Welding Model Switch
(MMA,MIG,LIFT-TIG)
6.Current Adjustable Knob
(MMA,MIG,LIFT-TIG)
8.MIG welding Voltage
Adjustable Knob
9.MIG Wire Speed
Adjustable Knob
10.Positive polarity connector
13.Polarity conversion
cable connector
1.Overheating alarm
3.Welding current display
5.Welding Wire Inching
7.Welding voltage display
11.Negative polarity connector
12.MIG Welding gun
1
3
7
9
11
13
15
18
10
12
14
16
2
4
5
6
8
ON
OFF
GAS
17
INPUT
AC220V±10%
50HZ
1.Welding Model Switch
(MMA,MIG,LIFT-TIG)
6.Welding Current Adjustable
Knob
9.MIG Voltage Adjustable Knob
7.MIG Wire Speed Adjustable
Knob
12.Positive polarity connector
14.Polarity conversion
cable connector
4.Overheating alarm
5.Welding current display
2.Welding Wire Inching
8.Welding voltage display
11.Negative polarity connector
13.MIG Welding gun
10.MIG burnback function
3.Power indicator light
1
3
7
9
11
13
14
10
12
2
4
5
6
8
15.Trachea inlet connector
16.The power switch
17.Power cord with plug
19.Built-in coolingFan
and ventilaton
18.Ground wire
16
19
18
15
17
ON
OFF
GAS
MMA
MIG
LIFT
TIG
1 10
1 10 1 10 1 10
BURNBACK
MIG
INPUT
AC110V/220V±10%
50/60HZ
MIG-160
MIG-160
MIG-160
2.Installment when use gas welding (solid wire):
3.Connect welding gun and ground clamp.
1) Connect the gas bottle with co2 regulator ow meter and the Input Gas
Connector behind the machine via gas hose.
2) Inse the cable connector of eah cable into the socket in the front panel.
3) Set the welding wire spool on the wheel axis, the wheel hole should be matched
with the wheel xer.
4) Choose wire slot according to wire size
5) Loosen the screw of wire-pressing wheel, put the wire into slot via wire-lead
tube, and tune the wire distos and aects wire sending wire is usually set to the
xed hole on the wheel side. To prevent the bent wire from getting stuck, please
cut o this pa of the wire.
6) The MlG torch has been settled inside of the machine and you just need to put
the wire into the Wire-pressing wheel to x wire from gliding.
7) Wire roller should tum clockwise rotation to let out wire, to prevent wire from
gliding; the torch by hand.
IN PUT
220V±10%
50HZ
machine rear view
ow meter
gas cylinder
gas hose
input line
clamp
torch
MIG-160
Flux cored wire
solid wire
1kg
Knob set:2-3 mark
IN P UT
AC220V±10%
50HZ
21
1
2
MIG-160
MIG
22
23
MIG-160
24
25
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai.
Impoed to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEAST WOOD NSW 2122 Australia
Impoed to USA: VEVOR STORE INC, 9448RINCHMONDPL#E RANCHOCUCAMONGA,
California,91730 UnitedStatesofAmerica.
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
Poole das Group Ltd
Unit 5,Albe Edward House,
The pavilions,preston
UK REPEC REP
