SERIES
Smart Vacuum Cleaner
Instruction Manual
Manual De Uso
Mode D’emploi
*Actual product may differ from illustration.
1
EN
CONTENTS
Important Safety Instructions
...............................................................
2
Overview
................................................................................................
5
Accessories
............................................................................................
7
Assembly
...............................................................................................
9
Operation
............................................................................................
11
Maintenance
.......................................................................................
21
Specications
......................................................................................
24
Troubleshooting
..................................................................................
25
Warranty
..............................................................................................
27
EN
2
SAVE THESE INSTRUCTIONS
Household use only.
When using an electrical appliance, basic precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
WARNING – To reduce the risk of re, electric shock, or injury:
1. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision.
2. The appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction.
3. For INDOOR use ONLY. Do not use the appliance in outdoors, nor in commercial or
industrial environments. Do not use the appliance on wet surfaces or surfaces with
standing water.
4. Do not allow to be used as a toy. Close attention is necessary when used by or near
children, pets or plants.
5. Use only as described in this manual. Use only manufacturer’s recommended
attachments.
6. Do not use with a damaged cord or plug. If appliance has been dropped, damaged,
left outdoors, dropped into water, or is not working as it should, return it to a service
center.
7. Do not handle charger, including charger plug, and charger terminals with wet hands.
8. Do not put any object into openings. Do not use with any openings blocked; keep free
of dust, lint, hair, and anything that may reduce air ow.
9. Keep hair, loose clothing, ngers, and all parts of your body away from openings and
moving parts.
10. Use extra care when cleaning on stairs.
11. Do not use to pick up ammable or combustible liquids, such as gasoline, or use in
areas where they may be present.
12. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot
ashes.
13. Do not use without a lter.
14. Prevent unintentional activation. Ensure the switch is in the off position before
connecting to the battery pack, picking up or carrying the appliance. Carrying the
appliance with your nger on the switch or powering on the appliance with the switch
on may cause accidents.
Important Safety Instructions
EN
3
15. Disconnect the battery pack from the appliance before making any adjustments,
changing accessories, storing the appliance. Such preventive safety measures reduce
the risk of starting the appliance accidentally.
16. For the purposes of recharging the battery, only use the detachable supply unit
provided with this appliance. A charger that is suitable for one type of battery pack may
create a risk of re when used with another battery pack.
17. Use appliances only with specically designated Tineco battery packs. Use of any other
battery packs may create a risk of injury and re.
18. When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a
re.
19. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water. If liquid comes into eye contact, seek
medical help. Liquid ejected from the battery may cause irritation or burns.
20. Do not use a battery pack or appliance that is damaged or modied. Damaged or
modied batteries may exhibit unpredictable behavior resulting in re, explosion or risk
of injury.
21. Do not expose a battery pack or appliance to re or excessive temperature. Exposure
to re or temperature above 266°F (130°C) may cause an explosion.
22. Follow all charging instructions and do not charge the battery pack or appliance
outside of the temperature range specied in the instructions. Charging improperly or
at temperatures outside of the specied range may damage the battery and increase
the risk of re.
23. Have servicing performed by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the product is maintained.
24. This appliance contains battery cells that are non-replaceable. Do not modify or
attempt to repair the appliance or the battery pack except as indicated in the
instructions for use and care.
25. Always turn off this appliance before connecting or disconnecting the motorized
nozzle.
26. Do not charge or store the appliance outdoors or inside a car. Only charge, store or use
the battery in a dry indoor area where the temperature is higher than 39.2°F (4°C) but
lower than 104°F (40°C). The charger is for indoor use only.
Only For NA:
FCC Supplier’s Declaration of Conformity
Tineco / PURE ONE S12V SERIES
This appliance complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This appliance may not cause harmful interference, and (2) this appliance must accept
any interference received, including interference that may cause undesired operation.
TINECO INTELLIGENT, INC.
1700 WESTLAKE AVENUE N., SUITE 200, SEATTLE, WA, 98109, USA
EN
4
WWW.TINECO.COM
1-855-292-8864
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital appliance, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Note
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modications to this equipment, such modications could void the user’s
authority to operate this equipment.
IC Note
This appliance contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This appliance may not cause interference.
(2) This appliance must accept any interference, including interference that may cause
undesired operation of the appliance.
- This Class B digital apparatus complies with Canadian ICES-003.
- This equipment complies with ISED RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and any part of your body.
EN
5
A. Magnetic attachment zone
B. Dust empty release button
C. Dustbin
D. MAX/AUTO
E. WiFi reset button
(Remove the dustbin to access)
F. Trigger lock
G. Dustbin release button
H. Trigger
I. HEPA release button
J. Battery indicator light
K. Battery release button
Overview
A EB F IC G JD H K
S12V
EN
6
A. Magnetic attachment zone
B. Mute button
C. Dust empty release button
D. Dustbin
E. Built-in bluetooth speaker
F. WiFi reset button
(Remove the dustbin to access)
G. MAX/AUTO
H. Trigger lock
I. Dustbin release button
J. Trigger
K. HEPA release button
L. Battery indicator light
M. Battery release button
S12V Plus
A EB F IC G J LD H K M
EN
7
Note:
• Test an accessory on a small, inconspicuous area before use on sensitive surfaces.
• The “Product Components” page shows which accessories are included with your purchase.
• As shown below, there are many components compatible with this model. If you require more
accessories, please visit the Tineco Ofcial Site.
Full-size LED multi-tasker power brush
Ideal for both hard oors and carpets.
Very effective for agitating dirt embedded in the carpet.
Mini power brush
For vacuuming upholstered furniture, mattresses etc.
Vacuums pet hair and removes ingrained dirt.
2-in-1 dusting brush
Switches between a wide and a soft brush by pressing the
release button. The soft brush is most effective on hard-surface
furniture while the wide brush is effective for upholstered
furniture, curtains, etc.
Crevice tool
For corners, nooks, and other hard-to-reach places such as
around car seats, picture frames, and cupboards.
Soft dusting brush
Angled bristles on a slender, oval-shaped rim provide anti-
static, cushioned contact. Suitable for dusting shelves, lighting,
delicate surfaces, electronics and more.
Products
BUY
ONLINE
Parts and Accessories Buy Nowwww.tineco.com
Accessories
EN
8
Flexible long crevice tool
Easy to bend, easy to reach tight spots. Suitable for cleaning dust
behind and beneath furniture, around refrigerators, and many other
tight gaps.
Full-size LED soft-roller power brush
Perfect for hard oors, especially sensitive wood oor.
Picks up coarse and ne dirt at the same time.
Multi-angle folding tube
An articulated joint makes it adjustable to allow for exibility when
cleaning from high to low.
Flexible extension hose
Excellent extension and exibility to access hard-to-reach spaces;
perfect for in-care use.
Compatible with all non-motorized Tineco accessories.
Pre-lter cleaning tool
A dirty lter is a leading cause of suction loss, and this tool is
designed to make your lter last much longer. Place the dirty
lter inside the pre-lter cleaning tool and close the lid. Run the
appliance in MAX mode, and rotate the side cover.
Automatic pre-lter cleaning tool
A dirty lter is a leading cause of suction loss, and this tool is
designed to make your lter last much longer. Simply place the
dirty lter inside the automatic pre-lter cleaning tool and close
the lid. Connect the tool to the main body and pull the trigger. The
appliance will automatically shut off once completed.
Hair cleaning tool
Use the end with the small blade to remove hair and debris
wrapped around the roller.
Use the end with the brush to clean the brush window, and the
dustbin, as required.
EN
9
Tube Installation
Brush Installation
Insert tube.
Insert the power brush.
Press the release button to remove the tube.
Press the release button to remove the power
brush.
Assembly
EN
10
Dustbin Installation
Battery Installation
To clean the dustbin more thoroughly,
press the dustbin release button to
fully detach from the appliance.
Press the battery release button, and
remove the battery.
To replace, slide the battery into the slot at
the base of the main body. The battery will
click into position when correctly tted.
When re-attaching the dustbin, hold on an
angle and slot the top of the dustbin into
the hook on the main body. Push upwards
until the hook is xed into the slot on the
dustbin and then it clicks into place.
①
②
EN
11
Preparing for Use
Pull the trigger to activate the suction.
The appliance will start in AUTO mode by
default. After 3 seconds, press the MAX/AUTO
button to switch to Max mode.
Pull the trigger lock to hold the trigger for
continuous power mode.
Note:
• Before the rst use, please charge the appliance (see “Charging the Battery”) for 3-4 hours in an area
where the ambient temperature is between 39.2°F (4°C) and 104°F (40°C).
• Select an accessory and attach it to the appliance before use (see “Accessories”).
Operation
MAX AUTO
MAX AUTO
EN
12
• Determine the best wall location for mounting the dock. Choose a location close to an
electrical outlet and measure the length of the power cord to be sure that it will reach.
• Place the appliance on the wall-mounted dock for convenient storage and recharging after use.
Assemble the two bracket components,
with a “click” to signify correct assembly.
Once this is complete, use the screws
provided by Tineco to afx the dock to
the wall.
Warning:
• Ensure the wall surrounding the mounting
area is free of gas or water pipes and
electrical cables and wires.
• To avoid the dock falling, ensure it is rmly
installed.
①
②
Place the main body on the dock. To avoid bristle damage, always place
attachments on the dock after use.
EN
13
Adhesive Magnet
With a dustless cloth, wipe the main body
and the back of your phone to remove
all dust.
With the magnet attached, place the
phone on the magnetic attachment zone
in order to secure on the main body.
Remove the cover from the adhesive surface
and place the magnet on the back of the
phone. Wait 10 minutes before using.
MAX AUTO
Note:
• The ideal ambient temperature when attaching the magnet is 59 °F (15°C) - 100.4 °F (38 °C).
Do not attach if ambient temperature is below 50 °F (10 °C).
• To prevent air bubbles, start at one end and gently move to the other end.
• Do not re-use the magnet if it falls off, and contact Customer Service to purchase a new one.
• If the phone is moved, return to original position to prevent from slipping and falling.
• The adhesive magnet is suitable for use on metal and plastic surfaces. It is unsuitable for use on
glass, pottery or porcelain.
• As such, we recommend using phone cases made from metal, plastic, silicone, TPU, etc.
• To prevent the phone from falling due to oversized/overweight, recommended phone size/weight:
less than 7.2 inches/230g.
• Magnetic attachment zone should be kept away from other magnetic objects.
1
3
2
EN
14
Discover More
Work with Alexa
Connect your devices to Alexa and you can give voice commands to check work status, obtain a
cleaning report, etc.
Built-in Bluetooth Speaker (for PURE ONE S12V Plus)
With successful pairing, the Bluetooth speaker can play audio from your phone.
1. Pull the trigger to activate Bluetooth on the appliance.
2. Enable Bluetooth on your phone and select
“Tineco_XXXX” from the device list.
Note:
• If the device is not used for 30 minutes or more, Bluetooth
will automatically disconnect.
MAX AUTO
Voice Prompt (for PURE ONE S12V Plus)
The appliance can report the work status in real time.
List of voice prompt
“Power on” “Please clean the pre-lter” (when WiFi connected)
“Auto mode” “Please clean the dustbin” (when WiFi connected)
“Max mode” “Dust sensor malfunction”
“WiFi connected” “Brush roller tangled”
“Bluetooth enabled”
“Air channel blocked, please remove
blockages and clean the lters.”
“Bluetooth connected” “Voice prompts on”
“Bluetooth disconnected” “Voice prompts off”
“Low battery, please charge” “Charging”
• Press to disable voice prompts when the indicator is illuminated. Press again to turn the
voice prompts on.
EN
15
App
• All functions can be performed using the Tineco app. Download the Tineco app to access more
features.
TinecoTineco
iOS 9.0 or later
Android 5.0 or later
App
Downloads
www.tineco.com
Support
App Downloads
NFC Reader
• The appliance is equipped with NFC technology, enabling for simpler connection to the Tineco app.
1. Enable NFC functionality and place the phone within the reading area.
2. Follow the prompts on your phone screen to go to the app download page; no need to search in
the App Store.
3. After the app is downloaded, the login page will automatically appear.
4. After login, the Tineco device list page will open.
Note:
• Please enable the NFC function on your phone before use.
• First test the NFC sensing area of your phone during use to ensure compatibility with your phone
model.
• Android: Only for NFC-enabled phones; iOS: Only for iPhone XR or above.
① ② ③ ④iOS Android
EN
16
Battery
Battery level in real time.
Total dust: 0 dust/0 min
Cleaning Performance
0
0
dust
min
/
Cleaning report
Displays the dust amount, working hours and working status.
Suction adjustment
When in manual mode, swipe the phone screen to adjust suction power.
Filter status reminder
Records the severity of the dirty lter and provides a cleaning reminder as required.
Contact us
You can contact the Customer Service about any problems during the working hours.
Feedback
If you have any comments, please send us your feedback.
App Function Introduction
Note:
• To disable the WiFi module, pull the trigger to activate the
appliance. Remove the dustbin to access the WiFi button,
press and hold it for 20 seconds until lights off.
• To enable the WiFi module, pull the trigger to activate the
appliance, then press the WiFi button for 2 seconds with
blinking and the WiFi module is turned on.
WiFi
MAX AUTO
MAX AUTO
EN
17
Cleaning Mode Selection
AUTO mode
• In AUTO mode, the suction power will change in real time according to the amount of dust
detected.
MAX mode
Start in two ways:
The default setting on startup is AUTO. The appliance then
takes 3 seconds to initially detect blockages or dust. If no
dust is detected, power is reduced to conserve energy.
In Max mode, press MAX/AUTO button or click AUTO in the
App to enter the AUTO mode.
In AUTO mode, press the MAX/AUTO button to switch to
MAX mode.
Remark: You can also swipe in the App to adjust suction
power as needed.
①
②
MAX AUTO
MAX AUTO
MAX AUTO
EN
18
Emptying the Dustbin
Charging the Battery
When nished, press the release button
on the side of the dustbin to empty the
contents.
Close and click the dustbin ap back
into place.
Connect the adaptor to the dock and outlet. To charge, secure the main body with the battery on
the dock.
Note:
* If you need a spare battery, please purchase from Tineco. When secured on the wall-mounted
dock, the battery attached to the main body will charge rst, followed by the spare battery.
Warning:
• Only use the Tineco-provided adapter to charge the battery.
• During long periods of not being used, store the lithium battery in a cool, dry place. Ensure the
battery is half-charged every 3 months.
spare battery
sold separately*
EN
19
Runtime
Charging Time
• When in AUTO mode, the runtime is approximately 50 minutes. When MAX power is used, the
runtime is approximately 10.5 minutes.
• Estimate data has been obtained by Tineco laboratory testing using one battery and non-motorized
accessories.
• A full charge takes approximately 3-4 hours for one battery.
• Estimated data was obtained by a Tineco Laboratory using ambient temperatures between
39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
Battery level > 20%: solid green light.
Battery level ≤ 20%: solid red light.
Blinking red light: fault.
Light up: working.
Blinking: possible reasons are motor failure, air channel blocked,
dust sensor malfunction, brush roller tangled or lter too dirty.
MAX AUTO
MAX AUTO
EN
20
MAX AUTO
MAX AUTO
MAX AUTO
MAX AUTO
MAX AUTO
Connect to Network
During Charging
Illuminated: WiFi has successfully connected.
Blinking: WiFi is connecting.
Charging (Battery level 0%~99%)
Battery indicator: breathing green light.
MAX/AUTO indicator: breathing white light.
Fully charged (Battery level up to 100%)
In 5 minutes:
Battery indicator: solid green.
MAX/AUTO indicator: solid white.
After 5 minutes: both indicator lights turn off.
Indicator light blinking: fault.
EN
21
Note:
• Clean the dustbin and lters after each use.
• To maintain high performance, wash and dry the pre-lter monthly, replacing it every 6 months.
Wash and dry the HEPA lter every 3 months, replacing it every 12 months.
Maintenance
Dustbin and Filters (mesh lter, pre-lter and HEPA lter)
Press the dustbin release button to remove
the dustbin.
Turn counter-clockwise to remove the
lters.
Clean with a damp cloth, taking care to
prevent water entering the appliance main
body and battery.
Clean the dustbin and mesh lter with a damp
cloth. Air dry completely before reinstalling.
1
3
2
4
Warning:
• Do not wash the dustbin as it contains a
dust sensor. If it comes into contact with
water, please dry it with a hair dryer.
EN
22
Pre-lter
Dust Sensor
Ensure the appliance is switched off
before cleaning, and remove the dirty
pre-lter from the mesh lter-holder.
Run the appliance in MAX mode, and
rotate the side cover to clean the dirty
pre-lter.
To avoid dust accumulation which can affect
cleaning performance, wipe the suction
mouth with a damp cloth.
Replace a clean lter to the main body. Put
the dirty pre-lter into the cleaning tool and
connect the cleaning tool to the main body.
After cleaning, insert the clean pre-lter into
mesh lter properly and it clicks into place.
Install the clean lters and dustbin back into
the main body, then close the dustbin ap.
①
②
③
④
EN
23
HEPA Filter
Brush Roller
Press the HEPA release button and gently
remove for cleaning. Do not use the appliance
without rst installing the HEPA lter.
Use a coin or other tool, to unlock the brush
roller lock, then remove the brush from the
brush window.
Gently clean the transparent brush window.
The HEPA lter can be washed under
running water and must be completely dry
before reinstalling.
Remove the debris wrapped around the
roller with the Tineco Hair Cleaning Tool.
After cleaning, reinstall the brush.
Warning:
• The power brush contains electrical components which must not be soaked or washed with water.
EN
24
Product PURE ONE S12V SERIES
Voltage 21.6V 2500mAh Li-ion
Rated Power 500W
Dustbin Capacity 0.6L
Charging Time 3-4 hrs
Charging Input 100-120V~
Running Time AUTO: ~50 mins MAX: ~10.5 mins
Disposal
• The battery contains materials that are harmful to the environment and must be
removed from the appliance before it is discarded.
• When removing the battery, the appliance must be powered off.
• Batteries, chargers, accessories and packaging should be sorted for environmental
friendly recycling. Do not put them into re, water or soil. Do not dispose of batteries
and chargers into household waste!
• If battery leakage contacts skin or clothing, immediately ush with water to avoid
irritation and seek medical help.
Specications
EN
25
Troubleshooting
Problem Possible cause Solution
The appliance does not
turn on
No power Charge the battery
Auto protection for overheating Restart after cooling down
The suction mouth is blocked Check and remove blockages
Weak suction power
Dustbin and lters are full Clean the dustbin and lters
The pre-lter is not installed Install the pre-lter
The appliance is blocked
(i.e. the tube, suction mouth or
some other parts)
Remove blockages
The brush roller tangled with hairs
or bers
Clean the brush roller
Abnormal motor sounds
The appliance is blocked
(i.e. the tube, suction mouth or
some other parts)
Remove blockages
Battery won’t charge
The adaptor is not correctly
inserted
Reinsert the adaptor correctly
Insufcient contact between the
main body and battery
Check that the main body and
battery are correctly placed
The adaptor is not designed for
PURE ONE S12V
Use the original adaptor
EN
26
Problem Possible cause Solution
Indicator light
blinking during
charging
Light off after 6s, charging error
Check if the adaptor and
battery are in good condition
Keep blinking, no battery pack
on the main body
Insert the battery on the main
body
Indicator light
blinking on work
Motor failure Remove blockages and restart
Air channel blocked Remove blockages
Brush roller tangled Clean the brush roller
Full of dust in lter
Follow Maintenance to
clean the lter
Dust sensor malfunction
1. Clean the dust on the inner
sensor
2. Install the dustbin correctly
Battery indicator
blinking red on
work
Battery failure
Remove the battery pack and
let it cool
Note:
If the above troubleshooting guide fails to provide a solution, please contact us at [email protected]
or visit our website www.tineco.com for further support.
MAX AUTO
MAX AUTO
EN
27
Warranty
2-YEAR LIMITED WARRANTY
• Only applies to purchases made from authorized retailers of Tineco.
• Is subject to the adherence of the requirements outlined in this instruction manual, and is subject to
further conditions outlined below.
WHAT IS COVERED?
• Your Tineco appliance has a 2-year warranty against original defects in material and workmanship,
when used for private household purposes in accordance with the Tineco Instruction Manual.
Motorized accessories and battery bought separately come with a 1-year warranty.
• This warranty provides, at no extra cost to you, all labor and parts necessary to ensure your appliance
is in proper operating condition during the warranty period.
• This warranty will only be valid if the appliance is used in the country in which it was sold.
WHAT IS NOT COVERED?
Tineco shall not be liable for costs, damages or repairs incurred as a result of:
• Appliances purchased from an unauthorized dealer.
• Careless operation or handling, misuse, abuse and/or lack of maintenance or use not in accordance
with the Tineco Instruction Manual.
• Use of the appliance other than for normal domestic purposes, e.g. for commercial or rental
purposes.
• Use of parts not in accordance with the Tineco Instruction Manual.
• Use of parts and accessories other than those produced or recommended by Tineco.
• External factors unrelated to product quality and use, such as weather, modications, accidents,
electrical outages, power surges or acts of God.
• Repairs or alterations carried out by unauthorized parties or agents.
• Failing to clear blockage and other hazardous material from the appliance.
• Normal wear and tear, including normal wearing parts, such as clear bin, belt, lter, HEPA, brush
bar, and power cord (or where external damage or abuse is diagnosed), carpet or oor damage due
to use not in accordance with manufacturer’s instructions or failure to turn the brush bar off when
necessary.
• Reduction in battery discharge time due to battery age or use.
EN
28
WARRANTY LIMITATIONS
• Any implied warranties relating to your appliance including but not limited to warranty of
merchantability or warranty of tness for a particular purpose, are limited to the duration of this
warranty.
• Warranty coverage applies to the original owner and to the original battery only and is not
transferable.
• This limited warranty gives you specic legal rights. You may also have other rights which vary by
region.
• Manufacturer’s warranties may not apply in all cases, depending on factors such as use of the
product, where the product was purchased, or who you purchased the product from.
Please review the warranty carefully, and contact the manufacturer if you have any questions.
WARRANTY SERVICE
Register: We highly recommend that upon purchase, you register your appliance on the Tineco ofcial
website (www.tineco.com/register) and enjoy exclusive benets. To register, please enter the last 11
digits of the serial number (found on the base of the main body).
Failure to register your product won’t diminish your warranty rights.
E*********XXXXXXXXXXX
E000000000XXXXXXXXXX
How to Claim: Please retain your proof of purchase. To make a claim under our Limited Warranty,
you need to provide your serial number and the original purchase receipt with the purchase date and
order number on it.
All work will be carried out by Tineco or an authorized agent.
Any replaced defective parts will become the property of Tineco.
Service under this warranty will not extend the period of this warranty.
If your appliance is not functioning properly, please email us: [email protected]
Call our Customer Service:
1-855-292-8864
Or email our Customer Service:
Visit Tineco Website:
www.tineco.com
www.tineco.com
1-855-292-8864
Mon. - Fri. 9am - 6pm (CST)
Contact us - We’ll get back to you within 1 business day.
Comuníquese con nosotros, lo contactaremos dentro de 1día hábil.
Contactez-nous – Nous vous répondrons dans un délai d’un jour ouvrable.
tinecoglobal
