PORTABLE NUGGET ICE MAKER
USER MANUAL
Scan the QR code to watch the
product videos
Web: www.electacticshop.com
Email: [email protected]
Read this booklet thoroughly before using
and save it for future reference
IMPORTANT SAFETY INSTRUCTIONS…………………………………………………
……… ………………………………………………
1
3
4
5
5
6
9
GETTING TO KNOW YOUR UNIT
BEFORE FIRST USE……………..........................................................
USING YOUR ICE MAKE R ……….………………………….……………………...…...
How To Obtain The Ice Cubes
…………………….……………………………............
System Cleaning/Sanitizing Procedure
..
………………………………………….….…...
TROUBLESHOOTING
…………………….……………………………………………....
TABLE OF CONTENTS
1
Your safety and the safety of others are very important.
We have provided many important safety messages in the manual for your appliance.
All safety messages will tell you what the potential hazard is, how to reduce the chance of injury,
and what can happen if the instructions are not followed. Always read and obey all safety messages.
This is the safety alert symbol:
!
!
All safety messages will follow the safety alert sy
DANGER
mbol and the word “DANGER” or “WARNING”
as shown
If the sup
ply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
This ice-maker must be positioned so that the plug is accessible.
Connect to properly grounded outlets only. No other appliance should be plugged into the same
outlet. Be sure that the plug is fully inserted into the receptacle.
Do
not run the power cord over carpeting or other heat insulators. Do not cover the cord. Keep cor
These words mean:
Serious injury may occur if you don't immediately follow the instructions.
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire,
electric shock, and injury to persons or property. Read all instructions before using any appliance.
Do not operate this
,
or any other appliance with a damaged cord.
d
away from tr
affic areas, and do not submerge in water.
We do not recommend the use of an extension cor
d, as it may overheat and become a risk of fire. If
you must use an extension cord, use No.14AWG minimum size and rated no less than 1875 watts.
Unplug the ice maker before cleaning or making any repairs or servicing.
Exercise caution and use reasonable supervision when appliance is used near children.
Do not use your ice-maker outdoors. Place the ice-maker away from direct sunlight and
make sure
that there is at least 6 inches of space between the back of your unit and wall. Ke
ep a minimum
distance of 6 inches on each side of your unit free.
Do not use other liquid to make the ice-cube other than water.
!
WARNING
IMPORTANT SAFETY INSTRUCTIONS
below:
2
Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
Do not tip over.
If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room
temperature before plugging it in.
WARNING-
This appliance must be earthed.
By Trained Service Personnel. Do Not Puncture Refrigerant Tubing.
O
Manual/Owner’s Guide Before
A
ttempting To Install r Service This Product. All Safety Precautions
Must be Followed
CAUTION-
Risk Of Fire Or Explosion. Flammable Refrigerant Used. Consult Repair
.
Regulations. Flammable Refrigerant Used
CAUTION-Risk Of Fire Or Explosion. Dispose Of Property In Accordance With Federal Or Local
.
Instructions Carefully. Flammable Refrigerant Used.
The ice maker should be installed in accordance with the safety standard for Refrigeration Systems
CAUTION-Risk Of Fire Or Explosion D
ue To Puncture Of Refrigerant Tubing
.
Follow
,
ASHRAE15. The ice maker shall not be installed in co
rridors or hallways of public buildings.
If the unit is with problem need to be maintained, that replacing with like components and that
servicing shall be done by factory authorized service personnel, so as to minimize th
e risk of
possible ignition due to incorrect parts or improper service.
IMPORTANT:
The wires in this mains lead are colored in accordance with the following code:
Green or Green with a strip yellow: Grounding
White:
Neutral
Black: Live
To avoid a hazard du
e to instability of the appliance, it must be placed at an even or flat surface.
Handlin
DANGER-Risk Of Fire Or Explosion. Flammable Refrigerant Used. Do Not Use Mechanical
Devices To Defrost Ice Maker. Do Not Puncture Refrigerant Tubing.
DANGER-Risk Of Fire Or Explosion. Fl
ammable Refrigerant Used. To Be Repaired Only
g
3
1.Control panel.
2.Cover for water tank.
3.Water tank.
4.Ice basket.
5.Flip door.
6.Window.
7.Drip tray.
8.Cover for secondary water tank.
9.Secondary water tank.
10.Hot air outlet.
11.Rear panel.
12.Power cord.
GETTING TO KNOW YOUR UNIT
A: Status indicator B: LIGHT button C: CLEAN button D: ICE-MAKING button
Control Panel
You can operate this appliance by touch the button
on panel as shown above,
the main
function
includes: ice, clean and light.
Making lce
Clcaning
lce Full
Add Water
4
DANGER
1. Remove the exterior and interior packaging, and then check
if all
the accessories are included. If any
part is missing, please contact our customer service.
2. Remove all the tapes on the unit; take out the accessory parts inside.
3. Clean the interior with lukewarm water and a soft cloth.
4. Locating your ice maker on a level counter table far from direct sunlight and other sources of heat
*Improper use of the grounded plug can result in the risk of electrical shock. If the p
ower cor
(i.e.: stove, furnace, and radiator). Make sure that there is at least 6 inches betwe
en the back and
sides of your ice maker with the wall.
5. Allow two hours for the refrigerant fluid to settle down before plugging your ice maker in.
6. The power plug must be accessible directly.
d
1. This unit should be properly grounded for your safety. The power cord of this appliance is equippe
is damaged, please call our customer service.
d
with a grounding plug which mates with standard grounding wall outlets to minimize the possibility of
electric shock.
2. Plug your ap
pliance into an exclusive, properly installed, grounding wall outlet. Do not under any
1. Move the machine to the edge of the desktop, then put a container under the desktop, unplug th
Before using your ice maker, it is strongly recommended to clean it thoroughly
Unplug the unit before cleaning or making any maintenance
circumstances, damage the grounding means of the plug. Any question concerning power and/or
grounding should be directed toward a certified electrician.
3. This appliance requires a standard 110-120Volt, 60Hz electrical outlet with good groun
ding means.
.
.
e
water drain cap to drain the water inside the unit.
2. Reinsert the water drain cap, take out the water tank.
3. Then use the water to rinse the inside parts, and drain out the water by unplugging the drain cap on
front bottom side.
4. The outside o
f the ice maker should be cleaned regularly with a mild detergent solution and warm
water.
5. Dry the interior and exterior with a cl
ean soft cloth.
6. When the machine is not to be used for a long time, drain water completely & dry the interior.
BEFORE FIRST USE
WARNING
,
Unpacking The Unit
Fill with potable water only. Only use drinking water.
Connecting The Unit
Cleaning And Maintaining
the
5
How To Obtain The Ice-cube
1. Pour potable water into water tank, 0.47 gallon (1.8liters) water at most at one time.
2. Open the flip door, pull out half of the water tank, flip open the
cover of the water tank, then
USING YOUR ICE MAKER
pour water, and push the water tank forward till it's in position.
Note: Please make sure that the water tank is pushed in place, otherwise it may show water
shortage!
3. Plug in the power cord.
appliance; otherwise it will not work properly.
5. Press “ICE” button, the “Making Ice” indicator will on, it begins to work, press this button again, it wil
4. Before start making ice, please make sure the water drain cap has been inserted into the
l
stop making ice.
TIPS: For the first time, or if the appliance has not been used for a long time, it is recommended to
clean this appliance before you start to make ice.
6. While the ice-maker is on, verify wate
r level periodically. If w
ater pump can’t pump out water, the ice
maker will stop automatically, and the “Add Water” indicator will flash red light
. Need to pour water into
the water tank
.
7. You can enjoy your ice cubes when the control panel shows“Ice Full”.
6
System Cleaning/Sanitizing Procedure
1. Unplug the nugget ice maker.
2. Clean the water tank and internal water tanks with a soft brush.
3.After using the ice maker continuously for more than one month, please thoroughly clean
the entire unit before use. The cleaning steps refer to the System Cleaning/Sanitizing Procedure
of
this manual.
6.When putting the basket back into the unit, please ensure that it is accurately placed in the
4.Please gently open the flip door, especially when the ice cubes in the basket is full.
5.When ice cubes fall into the gap between the flip door and the inner cavity accidentally,
causing the
door to fail to close, please remove the ice cubes first.
limit slot.
7.If the basket falls into the internal water reservoir of the unit due to not being placed in the limit
TIPS:
1.When there is water in the water tank and the "Add water" indicator is on, please push the
water tank into the unit in place.
2.When the ice maker is not in use for a period of time, please drain the water inside the unit,
because bacteria can easily breed in humid environments.
slot, please first remove the water reservoir at the top of the basket, then you can take out the basket
with your bare hands.
7
4. Produce a solution by diluting one teaspoon of household white vinegar with five cups of
water for daily cleaning.
5. Pour the fluid into the water tank (1.8L at most) and plug in the ice maker.
6. Press the "CLEAN" button to initiate the cleaning process for about 20 minutes, then the
"Cleaning" indicator will be off.
3. Take off the bottom drain cap and drain out the water to a sink.
Making lce
Clcaning
lce Full
Add Water
Note: For monthly cleaning of removing mineral deposits, after the "Cleaning" indicator is off, please
unplug it and leave the solution in the unit for more than 12hours, then proceed to the following
operations.
7. Take off the drain cap and drain out the water to a sink.
8. Repeat the step 6 to 7 with fresh water for two more cycles to rinse the interior, then insert the
drain cap back.
9. When completed, fill the unit with fresh water and press the "ICE" button to start ice making process.
8
Note: Change water in the water tank every 24 hours to ensure a reasonable hygiene level. If the unit
isn’t to be used, drain all water & dry the water tank.
9
PROBLEM POSSIBLE CAUSE SOLUTION
"Add Water"
indicator flashes
There is no water in the water tank.
(Lack of Water)
Water tank is not in place. Push the water tank forward till it
in position, and press “ICE” button
again to restart the unit.
Stop the ice maker, fill water, and
press “ICE” button again to restart
the unit.
TROUBLESHOOTING
There is too much ice.
(No ice cube inside).
The system is under repair
Ambient temperature or water
temperature in inner tank is too high.
Refrigerant liquid leakage. Press the ICE button twice, restart
ice making program. If this problem
shows up again, verify it by a qualified
technician
Cover motor is broken
Pipe in the cooling system isblocked.
Hot Air outlet has been blocked by
something.
Water temperature in inner tank is
too high.
Refrigeration system malfunctions.
Drain plug not in place Put the drain plug in place.
Verify by a qualified technician.
Verify by a qualified technician.
Pipe Joint in the appliance may loose
The seal has reached service life
Verify by a qualified technician.
Water temperature requirement
between 45-90℉
Hot Air outlet must be guaranteed
to have more than 6 inches of
ventilation distance.
Please run the ice maker below 90
Fahrenheit degree ambient and pour
colder water into the water tank.
It will automatically resume work. When
this problem occurs frequently, please
clean the machine carefully.
Suggest you to obtain the ice-cube.
Verify by a qualified technician.
"Ice Full" indicator
lights up
"Making Ice"
indicator lights flash
Making ice too
slowly
Water leakage
ICE button lights
and "Making Ice"
button flashes
Tel:
ROWAN ELECTRIC APPLIANCE LLC
8:30am-5:30pm P.S.T.
Monday to Friday
V2
Web: www.electacticshop.com
Email: [email protected]
