Scrubbing & Sanitising Steam Mop
STEAMSPOT
S2000
SERIES
To view HOW-TO VIDEOS
scan QR Code.
INSTRUCTION BOOKLET
WARNING: Danger of scalding. The steam emitted from the
steam mopis very hot and may cause scalding. Please use caution
when using the steam mop.
WARNING: Keep steam mopaway from children.
WARNING: Children should be supervised to ensure that they
do not play with the appliance.
1. DO NOT leave the steam mop
unattended when plugged in.
ALWAYS unplug the power cord from
the electrical outlet when not in use
and before servicing.
2. DO NOT use with damaged cord or
plug. If steam mop is not working as it
should or has been dropped, damaged,
left outdoors, or dropped into water,
return it to SharkNinja Operating LLC
for examination and repair. Incorrect
reassembly or repair can cause a risk of
electrical shock or injury when used.
3. To protect against a risk of electric
shock, DO NOT immerse the steam
mop in water or any other liquids.
4. DO NOT handle the plug or steam mop
with wet hands or operate it without
wearing shoes.
5. DO NOT pull or carry by cord, use
cord as a handle, close a door on cord,
or pull cord around sharp edges or
corners. DO NOT run steam mop over
cord. Keep cord away from heated
surfaces.
6. DO NOT unplug by pulling on power
cord. To unplug, grasp the plug, not the
power cord.
7. Unplug before servicing.
8. ALWAYS make sure the steam mop is
UNPLUGGED when not in use
9. NEVER fill the steam mop or attach
the mop head when the steam mop
is plugged into an electrical outlet.
Unplug from the electrical outlet and
allow to cool before you fill the mop.
10. When cleaning the exterior of the
steam mop, unplug the power cord
from the electrical outlet and clean the
Steam mopwith a dry or damp cloth.
DO NOT pour water or use alcohol,
benzene, or paint thinner on the steam
mop.
11. To avoid circuit overload, DO NOT
operate another appliance on the same
socket (circuit).
12. To avoid scalding injuries, ALWAYS
unplug and allow the steam mop to
cool before removing tanks/steam pad.
13. This appliance can be used by persons
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance.
USE WARNINGS
14. When in use. NEVER turn the steam
mop on its side.
15. Use the system only for its intended
use
16. DO NOT use for space-heating
purposes.
17. DO NOT use outdoors.
18. DO NOT allow the steam mop to be
used by children. Close attention is
necessary when used near children.
pets or plants
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY. READ ALL INSTRUCTIONS BEFORE USE
GENERAL WARNINGS: WHEN USING YOUR SHARK Steam spot, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
sharkclean.co.uk
SAVE THESE INSTRUCTIONS
19. Use only as described in this instruction
manual.
20. Use only manufacturer’s recommended
accessories.
21. DO NOT put any objects into the steam
nozzle openings.
22. DO NOT put hands or feet under the
steam. It gets very hot.
23. Use ON LY on flat, horizontal surfaces.
DO NOT use on walls, counters, or
windows.
24. DO NOT use on leather, wax-polished
furniture, synthetic fabrics, velvet,
or other delicate, steam-sensitive
materials.
25. DO NOT add cleaning solutions,
scented perfumes, oils, or any other
chemicals to the water used in the
steam mop as this may damage it or
make it unsafe for use. If you live in a
hard-water area, we recommend using
distilled water in your steam mop.
26. You can release the brush-roll after you
have unplugged the steam mop and
allowed it to cool.
27. Extreme caution should be exercised
when using the steam mop to clean
stairs.
28. NEVER use steam mop without a mop
pad attached.
29. Keep your work area well lit.
30. Store steam mop indoors in a cool,
dry place.
31. Keep hair. loose clothing, fingers. and
all parts of body away from openings
and moving parts.
32. DO NOT carry the steam mop while in
use.
33. The steam emitted from the steam
mop is very hot and may cause
scalding. Please use caution when
using the steam mop.
34. DO NOT use on unsealed wood or
unglazed ceramic floors. On surfaces
that have been treated with wax and
on some unwaxed floors, the sheen
may be removed by the heat and
steam action.
35. ALWAYS test an isolated area of
the surface to be cleaned before
proceeding. We also recommend that
you check the use and care instructions
from the floor manufacturer.
36. DO NOT scrub any one area for an
extended period.
37. DO NOT use the steam mop without
the brush-roll and adding water to the
water tank. When you use the steam
mop for the first time, it might take
longer than the normal 30 seconds to
start steaming.
38. To prolong the life of your steam
mop, we recommend using distilled
water. Add ONLY water to the tank.
Chemicals or cleaning solutions
(including vinegar) may damage the
steam mop and could be unsafe for
you and your family.
39. The liquid or steam must not
be directed towards equipment
containing electrical components,
such as the interior of ovens. Dispose
of contents/ container with a licensed
waste disposal site in accordance with
the requirements of the local waste
disposal authority.
40. Keep the appliance out of reach of
children when it is energized or cooling
down.
41. A hazard may occur if the appliance
runs over the supply cord.
42. DO NOT use to pick up flammable or
combustible liquids, such as gasoline,
or use in areas where they may be
present.
sharkclean.co.uk
WHAT’S INCLUDED
C
F
G
E
A
B
A
Handle
B
Pole
C
Power Button
C
Steam Blaster Trigger
E
Clean Solution Tank
F
Power Cord
G
Nozzle Base
G
Dirt Grip Pad
H
D
D
H
*Highlighted pads sold
separately for some product
configurations
sharkclean.co.uk
ASSEM B LY
1.
Align the pole with the opening in the
main body and insert firmly until click
into place.
2. Stand the unit upright on a flat surface
near a wall outlet and plug in the cord.
The LEDs on the main body will illuminate
when the cord is plugged in. Make sure all
parts are clicked securely into place.
1 2
NOTE: Do not leave the steam mop-
plugged in when not in use.
NOTE: To remove the handle, press the
release button located on the back of
the unit with a thin tool while pulling
up on the handle.
sharkclean.co.uk
USING YOUR STEAM SPOT
SELECTING A MODE
NOTE: When plugged in, the unit will
not release steam until it is leaned
back and is in use.
MODES:
STANDBY:
(LED LIGHTS FLASHING)
IN USE:
(LED LIGHTS ON, NUMBER
OF LEDS ILLUMINATED
WILL VARY PER MODE)
HIGH:
THE STEAM FLOW RATE
WILL BE RUNNING AT
HIGHEST PERFORMANCE
MEDIUM:
THE STEAM FLOW RATE
WILL BE RUNNING AT
A MEDIUM LEVEL
AND SPEED.
LOW:
THE STEAM FLOW RATE
WILL BE RUNNING AT A
SLOW PACE AND LOWEST
STEAM POWER
ERROR MESSAGES:
(REFER TO ERROR MESSAGE SECTION)
sharkclean.co.uk
USING YOUR STEAM SPOT
FILLING THE CLEAN SOLUTION TANK
1. Pull out tank and unscrew cap.
2. Fill the water tank with cold or room
temperature water to the WATER fill
line.
3. Reattach the cap and rotate it until it is
secure. Reinsert the tank until it clicks
into place.
TO SANTISE FLOORS*
1. Attach a clean mop pad onto Steam Mop
2. Plug in the unit, tilt the handle down towards you, and press the mode button to select
the HIGH setting.
3. Wait at least 20 seconds for the unit to begin producing steam.
4. To ready the unit for sanitisation, start cleaning with a forward and backward motion on
an appropriate sealed hard floor surface. After three minutes, your unit will be ready to
sanitise.
5. Move the floor nozzle slowly and evenly over the area to be sanitised while applying
continuous downward pressure. Slowly repeat, making sure to cover the entire area to
be sanitised with at least 15 strokes.
* Sanitisation studies were conducted under controlled test conditions. Be certain to follow all directions for use carefully to
fully sanitise with mop head set in the HIGH mode.
NOTE: Without sucient water supply
in the tank, the unit will not produce
steam.
NOTE: Adding chemicals or cleaning
solutions (including vinegar) may
damage the steam mopand could be
unsafe for use.
1
2 3
sharkclean.co.uk
USING YOUR STEAM SPOT
1. Place the pad on the ground with the
velcro strips facing up.
2. Align the nozzle over the pad and press
down until the pad is attached. Make sure
tag is oriented to the back of the unit.
5. Step on the floor nozzle and tilt the
handle back to activate the steam flow.
6. To activate the Steam Blaster, press the
spray trigger on the handle to blast away
tough stains.
3. Twist the quick-release cord holder to
unwrap the power cord. Plug the cord
into a wall outlet.
4. Press the Mode button to select the
steam level.
HOW TO USE YOUR STEAM SPOT
sharkclean.co.uk
The Shark SteamSpot has 3 Steam Control modes so you can select the ideal amount of steam
to use for each cleaning task. In MEDIUM mode, more steam will be produced than in LOW
mode. In HIGH mode, the maximum amount of steam will be produced. Press the Mode button
to select the steam level.
STEAM CONTROL
STEAM BLASTER:
1. To target tough messes with an extra burst of
cleaning power, move the front of the nozzle 2
to 10 inches (25 cm) from the mess (fig. 1), then
press and hold the spray trigger on the handle as
needed. (Hold longer for the toughest messes.)
2. Before scrubbing, wait 5 seconds to let the steam
blast penetrate the mess.
Tip: For more dicult messes, allow 20 seconds
or more.
SETTING IDEAL FOR THESE SEALED SURFACES RECOMMENDED USAGE
LOW
Laminate
Hardwood
Vinyl
Cleaning delicate surfaces
Light cleaning and dusting
Loosening and lifting light dirt
MEDIUM
Marble
Tile
Stone
Basic, everyday cleaning.
Cleaning large areas.
Cleaning moderate and heavy-trac areas
.
HIGH
Marble
Tile
Stone
Reaching hard-to-clean surfaces.
Tough cleaning and removing stuck-on messes and
stains.
Deep cleaning heavy-trac areas.
Cutting through heavy dirt and grime and sanitising*
floors.
NOTE: If your floors are cloudy, streaky, or spotty after cleaning, it may be due to
accumulated grease residue. See Maintenance section for more information.
CLEANING TIPS
Top Tip
For the most eective scrubbing and mopping, make cleaning passes in
a forward direction.
Stain
Cleaning
Saturate heavily stained areas. Hold the mop in place over a stain for 2
to 3 seconds to saturate it, then run the nozzle over the area multiple
times until the stain is fully removed. Repeat if needed.
Normal dry stains: Hold the mop in place over the stain for 5 seconds,
then mop.
Sticky/thick stains: Hold the mop in place over the stain for 10 seconds,
then mop.
Mopping Increase steam level when more saturation is needed
sharkclean.co.uk
fig. 1
1. Step on the pad and lift the steam mopto disengage the pad.
2. Dirty pads can be machine-washed or hand-washed. Allow pads to air-dry completely
before reinstalling.
DISASSEMBLY
PAD CARE INSTRUCTIONS
MAINTAINING YOUR STEAM SPOT
1. When ready to store, wrap the power cord securely around the storage clips. Rotate the
steam pad 90 degrees and flip it up for compact storage.
STORAGE
2
1
3
Machine-wash pads separately with warm water, using liquid detergent. Do not clean pads in a dishwasher,
as some detergents may cause the pads to leave streak marks on the floor. NEVER USE BLEACH,
POWDERED DETERGENT, OR FABRIC SOFTENERS. This will damage the pads or leave a coating that
will reduce their cleaning performance and absorbency. The pads should be line-dried or tumble-dried
on a low setting, as this will extend the life of the microfibre fabric. Loose fibres can indicate wear of the
microfibre fabric. DO NOT pull the loose fibres, as this can cause the weave to come undone. Simply trim
the loose fibres with scissors. REPLACEMENT PADS For best cleaning results, we recommend replacing the
pads every 4 months following normal use. As with any fabric, dirt particles, grease, friction, and repeated
washing can cause the fibres to break down, and you may notice an increase in eort needed to push or
pull the mop. You can purchase replacement mop pads and other accessories by visiting sharkclean.co.uk
sharkclean.co.uk
Contact Customer Service at +44 (0)800 862 0453 or visit sharkclean.co.uk.
TROUBLESHOOTING
PROBLEM POSSIBLE REASONS & SOLUTIONS
The steam mopisn’t
producing any steam.
The steam mopshould be securely plugged into an electrical socket.
Check your fuse or circuit breaker or try a dierent socket.
Make sure the water tank is full, the unit is plugged in, and the Mode button is
illuminated.
If the mode lights are o, try a dierent electrical socket.
If the lights are blinking, press the Mode button to select a steam mode.
If the settings lights are illuminated steadily, wait 20 seconds for the unit to warm up.
If after following the above steps the steam mopstill does not produce any steam,
contact Customer Service at
+44 (0)800 862 0453 or visit sharkclean.co.uk.
The steam
mopis producing
intermittent steam.
This is normal. For more consistent steam, select the MEDIUM setting.
Also make sure the water tank is full.
I can’t select a steam
mode.
Make sure the steam mopis plugged in and the settings lights are flashing.
If your steam mopis producing steam but the mode lights are o, call Customer
Service at +44 (0)800 862 0453.
Floors are cloudy,
streaky, or spotty
after steaming.
The pad might be dirty. Install a clean pad. If you washed the pad with powdered
detergent, then it could be damaged and require replacement.
Due to accumulated grease residue, the floor may require several cleanings with
the steam mop.
A more stubborn case may require you to rinse the floor with a mix of one part.
*Please consult your flooring manufacturer’s care and maintenance instructions
before applying any cleaning products or solutions.
It’s hard to push or
pull the mop.
The mop might be hard to push or pull if the pad isn’t wet enough.
It should get easier to move the mop across the floor after it’s been running for
a few minutes.
An overly dirty pad could also make it harder to push or pull the mop. We
recommend using a clean pad.
The steam mopis
vibrating or
wobbling.
Turn the power OFF and unplug the unit, and wait for the pad to cool. Follow the
instructions in the Assembling Your SteamSpot section to reinstall the pad.
The steam mopturns
o on its own.
If your steam mopshuts o while in use, it likely needs to cool down. Perform the
following steps before you restart cleaning:
1. Turn the steam mopo, unplug it, and remove pads.
2. Allow the unit to cool for a minimum of 30 minutes.
3. Reinstall the pads. Plug in the steam mop, select a steam mode, and
begin cleaning.
sharkclean.co.uk
THREE (3) YEAR LIMITED GUARANTEE
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the
product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark we are so
confident about the quality of our products that we give the original product owner an additional manufacturer’s
guarantee of up to three years (1 year standard plus 2 on registration). These terms and conditions relate to our
manufacturer’s guarantee only - your statutory rights are unaected.
The conditions below describe the prerequisites and scope of our guarantee. They do not aect your statutory
rights or the obligations of your retailer and your contract with them.
Shark® Guarantees
A household appliance like a Steam Spot constitutes a sizeable investment. Your new machine needs to work
properly for as long as possible. The guarantee it comes with is an important consideration - and reflects how
much confidence the manufacturer has in its product and manufacturing quality.
Every Shark® machine comes with a free parts and labour guarantee. Our customer service helpline (0800 862
0453) is open from 9.00am to 6.00pm Monday - Friday. It’s free to call, and you’ll be put straight through to a
Shark® representative. You’ll also find online support at www.sharkclean.co.uk
How do I register my extended Shark® guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following
information about your machine:
• Date you purchased the machine (receipt or delivery note)
To register online, please visit www.sharkclean.co.uk/register-guarantee. Products purchased directly from
Shark® are automatically registered.
IMPORTANT
• This guarantee will only cover your product from the date of purchase.
• The Shark guarantee is only valid in the UK
• Please keep your receipt at all times. Should you need to extend your guarantee we will need your receipt to
verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate
the extension.
What are the benefits of registering my free Shark® guarantee?
When you register your guarantee we’ll have your details to hand if we ever need to get in touch. If you further
agree to receive communications from us, you can also receive tips and advice on how to get the best out of your
Shark Steam Spot and hear the latest news about new Shark technology and launches.
If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.
How long are new Shark® machines guaranteed for?
Our confidence in our design and quality control means that your new Shark Steam Spot is guaranteed for a total
of up to three years (1 years plus 2 years on registration).
What is covered by the free Shark® guarantee?
Repair or replacement (at Shark’s discretion) of your Shark machine, including all parts and labour. A Shark
guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark guarantee?
1. Blockages - for details of how to unblock your Steam Spot, please refer to the instructions.
2. Normal wear and tear such as pads, water tank, etc.
3. Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of
the Steam Spot which is not in accordance with the Shark® instructions supplied with your machine.
4. Use of the Steam Spot for anything other than normal domestic household purposes.
5. Use of parts not assembled or installed in accordance with the operating instructions.
6. Use of parts and accessories which are not Shark® Genuine Components.
7. Faulty installation (except where installed by Shark®).
8. Repairs or alterations carried out by parties other than Shark® or its agents.
What happens when my guarantee runs out?
Shark® does not design products to last for a limited time. We do appreciate that there may be a desire for our
customers to want to repair their Steam Spot after the guarantee has lapsed. In this case please contact our
Freephone customer service help line and ask about our out of guarantee programme, on 0800 862 0453.
Where can I buy genuine Shark® spares and accessories?
Shark® spares and accessories are developed by the same engineers who developed your Shark Steam Spot.
You’ll find a full range of Shark® spares, replacement parts and accessories for all Shark® machines at
www.sharkclean.co.uk.
Please remember that damage caused by use of non-Shark® spares is not covered under your guarantee.
sharkclean.co.uk
ORDERING REFILLS & PARTS
Replace the Steam Pads every 4 months.
Only use water with the Shark SteamSpot.
To order mop pads,please visit sharkclean.co.uk or scan the QR code.
TECHNICAL SPECIFICATIONS
Model: S2001UK 31
220-240V~, 50-60Hz, 1200W
RECORD THIS INFORMATION
Model Number: �������������������������
Date Code: �����������������������������
Date of Purchase: �����������������������
(Keep receipt)
Store of Purchase: �����������������������
REGISTER YOUR PURCHASE
registeryourshark.com
sharkclean.co.uk
NOTES
sharkclean.co.uk
sharkclean.co.uk
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Instruction Booklet is designed to help you get a complete understanding of your new Steam mopSteam Cleaner.
SharkNinja Europe Ltd,
1st/2nd Floor Building 3150, Thorpe Park,
Century Way, Leeds, England, LS15 8ZB
+44 (0)800 862 0453
www.sharkclean.co.uk
SharkNinja Germany GmbH
Rotfeder Ring 9
60327 Frankfurt am Main
Germany
www.sharkclean.eu
Illustrations may dier from actual product. We are constantly striving to improve our products, therefore the specifications
contained herein are subject to change withoutnotice.
SHARK is a registered trademark in the United Kingdom of SharkNinja Operating LLC.
© 2024 SharkNinja Operating LLC.
S2000UK_IB_MP_241209_Mv1
PRINTED IN CHINA
To view HOW-TO VIDEOS
scan QR Code.
@sharkcleaninguk
@sharkcleanuk
@sharkcleanuk
