User’s Manual for
Depository Safe DX Series
WARNING
- For security purposes, change the factory default
code as soon as possible.
First factory default code iis: 168
Second factory default code is: 12345678
- Test registered pin code a few times before closing
the door.
- Avoid leaving the safe door open and unattended; it
will allow unauthorized individuals to reprogram the
safe gaining full access to the safe and its contents.
- Store emergency keys in a secure place; NOT inside
of the safe.
- Be careful when opening and closing the
depository slot.
- Keep children away from safe; they should not play
with or around the safe at anytime.
- Note: Barska is not responsible for any installation
damages and any lost or stolen contents.
Read all instructions before using this safe.
A. Handle
B. Indicator Lights
C. Key Pad
D. Battery Compartment
(Located behind key pad)
BATTERY & KEY ACCESS
Push down on button
located under the key pad
and turn keypad cover
counter clockwise.
DO NOT pull on the wires or
touch the electronic
components.
Install Battery
Insert one new 9V alkaline battery into the battery
compartment and restore keypad cover.
Key Access
Insert access key into key slot and turn clockwise to
open safe.
PIN CODE REGISTRATION
Safe retains 2 pin codes
- First factory default code is: 168
- Second factory default code is: 12345678
Changing First Pin Code
1. Open Safe with either Pin Code or Emergency Key.
2. Press initialization button located inside of the safe,
lock will beep twice and yellow indicator light will be lit.
3. Enter desired Pin Code (1-8 Digits) then press
“
*
” button. 2 short beeps will be heard and yellow
indicator light will disappear.
4. Use the handle to extend the safe bolts and enter
registered pin code then press “ # ” button.
If safe can be opened registration was successful, if safe
doesn’t open registration was unsuccessful, please
follow steps in Pin Code Registration to register
Pin Code.
Changing Second Pin Code
1. Open Safe with either Pin Code or Emergency Key.
2. Press “ 00 ” on the keypad, then press the initialization
button located on the inside of the safe, lock will beep
twice and yellow indicator light will be lit.
3. Enter second desired Pin Code (1-8 Digits) then press
“
*
” button. 2 short beeps will be heard and yellow
indicator light will disappear.
4. Use the handle to extend the safe bolts and enter
registered pin code then press “ # ” button.
If safe can be opened registration was successful, if safe
doesn’t open registration was unsuccessful, please
follow steps in Pin Code Registration to register
Pin Code.
See reverse side for more information
BC698
PARTS OF THE SAFE
D. Emergency Key Access
(Located behind key pad)
F. Initialization Button
Actual model may vary
Inside of Safe Door
A
C
D
E
B
F
OPENING AND CLOSING SAFE WITH PIN CODE
Safe can only be opened with emergency keys.
Open
1. On the key pad enter in either of the registered Pin
Codes and press and release “ # ” to confirm.
2. Turn the handle to the unlocked position and pull safe
door open.
Close
Close the safe door and turn the handle to the locked
position.
DUAL PIN CODE ACCESS
This feature will require entering both Pin Codes to
access the safe.
Enabling Dual Pin Code Access
Enter “
*
# 00 # ” followed by Pin Code & “ # ” button.
Disable Dual Pin Code Access
To disable Dual Pin Code Access enter “
*
# 11 # ”
followed by Pin Code 1 & “ # ” button, then enter Pin
Code 2 & “ # ” button.
LOCK OUT MODE
- If wrong code is entered 3 times safe will be in lock
out mode.
Lock Out Mode: Cannot use any functions on the safe
for 15 min, please leave batteries plugged into safe and
wait 15 min for insert key to unlock safe.
LOW BATTERY WARNING
If red indicator light is constantly lit while accessing and
using the safe, this indicates that the batteries are low,
please replace battery as soon as possible.
Note: Safe may still be opened in low battery state
depending on the voltage. If safe cannot be opened
please use emergency key. All registered Pin Codes
remains saved.
CARE AND MAINTENANCE
- Keep liquids away from the control panel. Spills on the
control panel will cause damage and possibly
electric shock.
- Secure safe in a proper area to prevent from falling and
causing damage or injury.
- DO NOT disassemble the product. For all repairs,
contact BARSKA Customer Service.
- DO NOT use chemicals or cleaning agents to clean
the safe.
MOUNTING INSTRUCTIONS
The safe may be mounted down to the floor. Be aware of
the load bearing. Failure to do so can result in personal
injury and/or damage to property. Use appropriate tools
when performing work and always use eye protection.
Floor Mounting
- Use proper drill tools depending on the type of floor you
are mounting the safe (wood, tile, or concrete).
- Measure the location of the pre-set drill holes; mark
their exact position onto the floor.
- Drill the appropriate size holes for the anchors you
are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the
safe and securing to anchors; ensure the safe is
mounted securely.
SAFE/LOCK BOX
BC767 10/23
1 YEAR LIMITED WARRANTY
BARSKA warrants this new safe/lock box to be free of defects
in material and/ or workmanship under normal use for a period
of twelve (12) months from the date product is purchased. This
limited warranty is delimited to repair or replacement only. This
warranty does not cover damage caused by improper
installation or maintenance. BARSKA disclaims all liability for
incidental or consequential damages resulting from misuse,
abuse, accident (such as dropping), fire, flood, service or
repairs other than those performed by BARSKA, acts of nature,
or arising out of any breach of this warranty. Altering the
product under any circumstances will automatically void the
warranty.
For service under this limited warranty, please have available
the proof of purchase and the purchase date and location as
well as a detailed description of the problem. This warranty is
not transferable and only applies to the original purchaser with
a proof of purchase from BARSKA or from an authorized dealer.
This warranty applies only to products purchased within the
United States, excluding Alaska, the Hawaiian Islands and all
U.S. territories in the Caribbean and the Pacific.
BARSKA will examine and go through troubleshooting
procedures, product repair or replacement of defective part(s)
or units with new part(s) or provide a new unit, if necessary,
during the warranty period. Reasonable shipping/handling
charges may apply and are based on Barska sole discretion.
Purchaser shall be required to prepay Shipping/handling
charges with a check or money order to BARSKA at time
product is returned. The Return Merchandise Authorization
Number (RMA#) and shipping/handling charge MUST be
obtained from BARSKA in advance of return. BARSKA shall not
be liable for damages or loss occurring during shipping. Please
visit via www.barska.com or call 909.445.8168 to obtain the
RMA#, Shipping/handling amount, and for more information.
BARSKA reserves the right to modify or discontinue, without
prior notice to the purchaser, any model or style of the product.
BARSKA will determine, at its sole discretion, whether a
product will be repaired or replaced. BARSKA reserves the right
to discontinue or change any feature of its products at any time.
If an exact replacement or product is not available, BARSKA
reserves the right to provide a part or product that matches as
closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied, whether
of merchantability or fitness for a particular use, except as
expressly set forth herein. The sole obligation of BARSKA
under this limited warranty shall be to repair or replace the
covered product, in accordance with the terms set forth herein.
BARSKA expressly disclaims any lost profits, general, special,
indirect or consequential damages which may result from
breach of any warranty, or arising out of the use or inability to
use any BARSKA product. Any warranties which are implied
and which cannot be disclaimed shall be limited in duration to a
term of one year from the date of original retail purchase.
Some states do not allow the exclusion or limitation of incidental
or consequential damages or limitation on how long an implied
warranty lasts, so the above limitations and exclusions may not
apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
© 2023 BARSKA
®
| Pomona, CA 91767, USA
