User’s Manual for
Drop Slot Depository Safe
WARNING
Read all instructions before using this safe.
Actual Model May Vary
- Store keys in a secure place.
- Test and make sure that the safe works properly
before mounting.
MOUNTING INSTRUCTIONS
The pre-drilled mounting holes are located on top, sides, and
bottom, allowing the safe may be mounted to walls, under
desks, under cabinets or to the floor. Be aware of the load
bearing. Failure to do so can result in personal injury and/or
damage to property. Use appropriate tools when performing
work and always use eye protection.
Wall Mounting
Do not mount the safe without anchoring to the wall
- Find the studs in the wall, at your desired location. Most studs
are 16 inches or 24 inches apart
- Check the wall for concealed wires or pipes
- Measure the location of the pre-set drill holes; mark their
exact position onto the wall ensuring that the studs or
anything else behind will not interfere
- Drill the appropriate size holes for the anchors you are using
- Carefully press the anchor into the holes at this time
- Mount the safe by running screws from inside of the safe and
securing to anchors; ensure the safe is mounted securely
Floor Mounting
- Use proper drill tools depending on the type of floor you are
mounting the safe (wood, tile, or concrete)
- Measure the location of the pre-set drill holes; mark their
exact position onto the floor
- Drill the appropriate size holes for the anchors you are using
- Carefully press the anchor into the holes at this time
- Mount the safe by running screws from inside of the safe and
securing to anchors; ensure the safe is mounted securely
Note: All information, feature, and specification displayed herein are based on the
data available at the time of publishing, thus they are subject to change without
notice. All product pictures displayed herein are for illustration purposes only. The
actual product may vary due to different circumstances.
3/24
BC717
©2024 BARSKA® | Pomona, CA 91767 | www.barska.com
PARTS OF THE SINGLE KEY
SAFE
1. Lock
OPENING THE SINGLE KEY
SAFE
1. Insert key into lock and
turn clockwise.
2. Slowly open the door.
A
1
PARTS OF THE DUAL
KEY SAFE
A. Right Lock
B. Left Lock
OPENING THE DUAL KEY SAFE
1. Insert key "A" into the right lock and turn clockwise to 12 o'clock
position. Do NOT pull out the key and just let it stay at
12 o'clock position.
2. Insert another key into left lock and turn clockwise to
1 o'clock position.
3. Slowly open the door.
B
Mounting Holes
SAFE/LOCK BOX
BC767
BARSKA warrants this new safe/lock box to be free of defects
in material and/ or workmanship under normal use for a period
of twelve (12) months from the date product is purchased. This
limited warranty is delimited to repair or replacement only. This
warranty does not cover damage caused by improper
installation or maintenance. BARSKA disclaims all liability for
incidental or consequential damages resulting from misuse,
abuse, accident (such as dropping), fire, flood, service or
repairs other than those performed by BARSKA, acts of
nature, or arising out of any breach of this warranty. Altering
the product under any circumstances will automatically void
the warranty.
For service under this limited warranty, please have available
the proof of purchase and the purchase date and location as
well as a detailed description of the problem. This warranty is
not transferable and only applies to the original purchaser with
a proof of purchase from BARSKA or from an authorized
dealer. This warranty applies only to products purchased
within the United States, excluding Alaska, the Hawaiian
Islands and all U.S. territories in the Caribbean and the Pacific.
BARSKA will examine and go through troubleshooting
procedures, product repair or replacement of defective part(s)
or units with new part(s) or provide a new unit, if necessary,
during the warranty period. Reasonable shipping/handling
charges may apply and are based on Barska sole discretion.
Purchaser shall be required to prepay Shipping/handling
charges with a check or money order to BARSKA at time
product is returned. The Return Merchandise Authorization
Number (RMA#) and shipping/handling charge MUST be
obtained from BARSKA in advance of return. BARSKA shall
not be liable for damages or loss occurring during shipping.
Please visit via www.barska.com or call 909.445.8168 to
obtain the RMA#, Shipping/handling amount, and for more
information.
BARSKA reserves the right to modify or discontinue, without
prior notice to the purchaser, any model or style of the product.
BARSKA will determine, at its sole discretion, whether a
product will be repaired or replaced. BARSKA reserves the
right to discontinue or change any feature of its products at
any time. If an exact replacement or product is not available,
BARSKA reserves the right to provide a part or product that
matches as closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied,
whether of merchantability or fitness for a particular use,
except as expressly set forth herein. The sole obligation of
BARSKA under this limited warranty shall be to repair or
replace the covered product, in accordance with the terms set
forth herein. BARSKA expressly disclaims any lost profits,
general, special, indirect or consequential damages which
may result from breach of any warranty, or arising out of the
use or inability to use any BARSKA product. Any warranties
which are implied and which cannot be disclaimed shall be
limited in duration to a term of one year from the date of
original retail purchase.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitation on how long
an implied warranty lasts, so the above limitations and
exclusions may not apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
1 YEAR LIMITED WARRANTY
