SHELF FOR INDUSTRIAL CABINETS PACK OF 2/4
MODEL NO: APICS2, APICS4
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
Original Language Version
© Jack Sealey Limited
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using these shelves and cabinets.
9 Locate the cabinet in a suitable work area.
9 Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING! Use the cabinet on level and solid ground,
preferably concrete.
9 Keep the shelf clean and tidy in accordance with good
workshop practice.
9 Keep children and unauthorised persons away from the wor
area.
8 DO NOT use the cabinet for any purpose other than that
for which it is designed.
8 DO NOT use the cabinet outdoors.
8 DO NOT place the cabinet in a damp or wet location or an
area where there is condensation.
8 DO NOT clean the cabinet or shelves with any solvents
which may damage the surfaces or the protective coating.
8 DO NOT move the cabinet when there are items placed
inside.
8 DO NOT step on the shelves.
8 DO NOT overload the shelves or cabinet
2. INTRODUCTION
APICS2 Pack of two shelves for Model No. APICCOMBOH2. Supplied with easy assemble brackets for shelves to slide onto. APICS4
Pack of four shelves for Model No’s APICCOMBO2, APICCOMBOF4, APICCOMOBO5 and APICCOMOBO7. Supplied with easy
assemble brackets for shelves to slide onto.
3. SPECIFICATION
Model No: .......................................................... APICS2 Model No: .............................................................................. APICS4
Dimensions: ................ (W x D x H): 840 x 380 x 30mm Dimensions: ..................................... (W x D x H): 840 x 380 x 30mm
APICS2
APICS4
APICS2 APICS4 Issue:2 (H,F) 25/08/23
4. ASSEMBLY
4.1. Assemble as per diagram.
© Jack Sealey Limited
Original Language Version
APICS2 APICS4 Issue:2 (H,F) 25/08/23
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
REGISTER YOUR
PURCHASE HERE
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
