VT-411 CCT
6-8
23756
6
152.7x146.8x31.2mm
5-6
φ
φ
and CCT.
88
2-6
mode and CCT by remote
Keep Lighting Mode (
Default Mode)
Lamp automatically lights up at night and turns to full
brightness when motion is detected in the range, then
turns to 5% brightness in 30 seconds of no motion.
Sensor Mode
120°
120°
Lamp automatically lights up at night and keeps 60%
for 3 hours, aer which lamp turns to Sensor Mode.
Aer 3 hours
120°
120°
In this mode, you can select the desired lighting time
and brightness by the remote control.
For example:
Press + + , the lamp will work as below:
Lamp automatically lights up at night and keeps 40%
brightness for 5 hours, aer which lamp turns to Sensor Mode.
40%
5H
Firstly, please press the button on the lamp, lamp turns on and
automatically enter Keep Lighting Mode (
Default Mode
).
Press the button again, lamp turns o.
Aer the lamp is turned on, then please use remote control to
select demanded work mode and CCT.
On/O Button
* Please remove the insulating film of the remote control before use.
* Remote control distance: 6 meters.
* Each time you press a button on the remote, the lamp flashes once.
* ON/OFF switch on the remote control has memory function.
* Lighting brightness and time can only be adjusted in Keep Lighting Mode.
AND CCT
On/O
Switch color temperature
Keep Lighting Mode
Remove this film before use.
MODE
8H
60% 40%
20%
5H
H12
3H
CCT
Sensor Mode
Lighting Brightness
Lighting Time
Indicator Light Status During the Day
Indicator Light Status At Night
Working Status of Solar Lamp
Always on Lamp is fully charge.
Flashes every 3 seconds Solar panel is charging normally.
O
The ambient sunlight is not strong enough
to get the solar panel charged.
Working Status of Solar Lamp
O Lamp discharges and works well.
Flashes every second
Lamp discharges and works well, but
battery power is less then 30%.
