M
ICOM WATER BOILER & WARMER
OPERATING INSTRUCTIONS
CD-WCC30KT
•Always follow basic safety precautions when using electrical appliances. Read all Instructions carefully. Please keep
these Operating Instructions at hand for easy reference.
I
MPORTANT SAFEGUARDS 2................................
SPECIFICATIONS 5...................................................
PARTS NAMES AND FUNCTIONS 6
.....................
B
OIL MODE
8............................................................
DISPENSE HOT WATER
10
...................................
D
ISPOSE WATER .10...............................................
REBOIL MODE
.
11
....................................................
A
UTOMATIC SHUT-OFF FUNCTION
.
11
...............
H
OW TO SET THE KEEP WARM MODE 12
........
Q
UICK TEMP MODE .14..........................................
ENERGY-SAVING TIMER FUNCTION 14
.............
C
AFÉ DRIP DISPENSING MODE 15
.....................
H
OW TO CHANGE THE NOTIFICATION SOUND
15
.......
C
LEANING AND MAINTENANCE 16
.....................
«
HOW TO REPLACE THE INNER LID GASKET 16
.......
C
ITRIC ACID CLEANING 17
...................................
R
EPLACEMENT PARTS
17.....................................
Q&A ON PRODUCT USE
18
...................................
T
ROUBLESHOOTING GUIDE 18............................
ZOJIRUSHI C O RPORA TION
IMPORTANT SAFEGUARDS
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED WHEN
USING ELECTRICAL APPLIANCES, INCLUDING THE FOLLOWING:
1. Read all instructions thoroughly.
2. Avoid touching hot surfaces and do not close or clog the steam vent opening under
any circumstances. The handles and knobs are provided for your safety and
protection.
3. To safeguard against fire, electric shock and possible injury, keep the power cord,
plugs and the appliance away from water or other liquids.
4. Close supervision is recommended when any appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow the appliance to
cool before adding or removing parts, and before cleaning the appliance.
6. Do not use or operate any appliance with a damaged cord or plug. If the appliance
malfunctions or has been damaged in any manner, unplug the appliance and return
it to the nearest authorized service facility or dealer for examination, repair or
adjustment.
7. The use of accessories or attachments not recommended by the appliance
manufacturer may result in fire, electric shock or other injury to persons.
8. Do not use outdoors.
9. Keep the power cord away from hot surfaces and do not let the cord hang over the
edge of tables or counters.
10. Do not place on or near a heated surface such as a gas or electric stove, or in a
heated oven.
11. Always use extreme caution when moving an appliance containing hot liquids.
12. The plug to the appliance should be attached first before plugging the cord into a
wall outlet.
13. Do not use the appliance for other than intended or specified purposes.
14. To protect against electrical hazard, unplug the cord before cleaning.
15. Scalding may occur if the lid is removed during boiling cycles.
16. Do not remove the Control Panel or the Water Level Gauge.
NOTE: This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug was designed to fit into a polarized
outlet in only one direction. If the plug does not fit fully into the outlet, do not
attempt to force it or modify it in any way. Simply reverse the plug and insert. If
it still does not fit, contact a qualified electrician.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY.
A. A short detachable power-supply cord has been provided for your safety. To
reduce risks from entanglement or tripping, a longer cord is not recommended.
B. Extension cords should only be used if care is exercised.
C. If using an extension cord: (1) the marked electrical rating of the detachable
power-supply cord or extension cord should be at least as high as the electrical
rating of the appliance; (2) if the appliance is of the grounded type, the extension
cord should have a ground-type 3-pronged plug; and (3) the longer cord should not
drape over the countertop or tabletop where it can be pulled on by children or
tripped over.
2
IMPORTANT SAFEGUARDS (cont.)
BEFORE USE
These WARNINGS and CAUTIONS are intended to protect you and others from personal injury and
household damage. To ensure safe operation, please follow carefully.
WARNINGS
Do not modify the product. Only a repair technician
may disassemble or repair this unit.
•Attempting to do so may cause fire, electric shock or
injury. Make any repair inquiries to Zojirushi Customer
Service.
Do not immerse the product in water or splash it
with water, and do not put it on a wet surface such
as a sink.
* Doing so may cause short circuit or electric shock.
Do not allow liquid to come into contact with the
Receptacle or Power Cord.
* Doing so may cause short circuit or electric shock.
Do not plug or unplug the Power Cord with wet
hands.
* Doing so may cause electric shock or injury.
Do not touch the Steam Vent or bring your hands
or face near the Steam Vent.
* Doing so may cause burns or scalding. Take special
precautions with children and infants.
Do not cover the Steam Vent with anything such
as a dishcloth.
■ Hot water may spill out, resulting in scalds. It may also
cause deformation or discoloration of the Upper Lid or
breakdown of the product.
Do not allow children to use the product
unsupervised. Keep it out of the reach of infants.
* Children are at risk of burns, electric shock or injury.
Do not fill over the Maximum Water Level Line.
* Overfilling may cause hot water to spill out, resulting in
scalds.
Always remove the Upper Lid before disposing
hot water.
* The Upper Lid may fall off and cause hot water to splash,
resulting in scalds.
Do not tilt or shake the product or carry in your
arms. Do not move it or drain hot water by holding
the Upper Lid.
* Doing so may result in scalding by hot water spilling out
from the Spout or Steam Vent, even if the Automatic
Dispense Lock is on. Always use the handle when
carrying.
Do not tilt the product or tip it over.
* Hot water may spill from the Spout or Steam Vent,
even if the Automatic Dispense Lock is on.
Do not slam the Upper Lid when closing.
* Hot water may dispense or spill out, resulting in scalds.
Do not use the product if the Power Plug or Power
Cord is damaged or if the Power Plug is loosely
inserted into the electrical outlet.
* Doing so may cause electric shock, short circuit or fire.
Close the Upper Lid securely.
* Hot water may spill out when the product is overturned,
resulting in scalds.
Do not remove the Upper Lid while boiling.
Do not damage the Power Cord.
* Do not bend, pull, twist, fold, or attempt to modify the
Power Cord. Do not place it on or near high
temperature surfaces or appliances, under heavy items
or between objects. A damaged Power Cord can cause
fire or electric shock.
Do not use the product as a cooler or place ice
inside of it.
■ Doing so may cause condensation, resulting in electric
shock or breakdown of the product.
Do not allow the end of the Appliance Plug to
become soiled with dust or come into contact with
any metal objects.
■ Doing so may cause electric shock, short circuit or fire.
Do not allow infants or children to put the
Appliance Plug in their mouth.
* Doing so may cause electric shock or injury. Take
special precautions with children and infants.
Insert the Power Plug completely and securely
into the electrical outlet.
•A loosely inserted Power Plug may cause electric
shock, short circuit, smoke or fire.
Use only an electrical outlet rated at 15 amperes
minimum, and do not plug other devices into the
same outlet.
* Plugging other devices into the same outlet may cause
the electrical outlet to overheat, resulting in fire.
If the blades or surface of the Power Plug become
soiled, wipe them clean.
* A dirty Power Plug may cause fire.
Do not use a power source other than 120 V AC.
■ Use of any other power supply voltage may cause fire
or electric shock.
Do not boil anything other than water.
* Attempting to boil, cook, or heat up the following items
may cause bubbling or boiling over, which may cause
scalding. Doing so may also cause clogging of the water
route or Electric Pump, corrosion of the Water Tank, or
peeling of the Nonstick Coating.
* Milk, sake, soup, charcoal, tea bags or tea leaves.
* Instant food.
* Food and sauce pouches or foods in plastic bags.
Replace the Inner Lid Gasket if it hardens, changes
shape, turns white, or otherwise becomes worn out.
* Hot water may spill out when the product is tilted or
tipped over accidentally, and may cause scalding.
Steam may also leak out from the gap and cause burns
or product failures.
•T h e illustrations used in these Operating Instructions may vary from the actual product you have purchased.
IMPORTANT SAFEGUARDS (cont.)
This product is not intended for
use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of the
product by a person responsible
for their safety. Children should
be supervised to ensure that they
do not play with the product.
Stop using immediately if you notice any of the following symptoms
indicating a malfunction or breakdown.
• Continued use of the product may cause smoke, fire, electric shocks or injury.
• The Power Plug or Power Cord has become very hot.
• The Power Cord is damaged or the electricity turns on and off when touched.
• The product is deformed or unusually hot.
• Smoke is arising from the product or there is a burning smell.
• Some parts of the product is cracked, loose or unstable.
• The product emits steam for at least 10 minutes continuously and does not
turn to the Keep Warm mode.
• Water leaks from the product.
If any of the above occurs, unplug the product immediately and return to
Zojirushi Customer Service for check-ups and/or repairs.
CAUTIONS
Always use caution when opening the Upper Lid
and avoid skin contact with steam.
• Loose water or steam may escape upon opening the
Upper Lid and cause scalds.
Do not touch hot surfaces during or for a short
period of time after use.
• Touching hot surfaces may cause burns. Be especially
careful with metal parts such as the Inner Lid and the
Water Tank.
Please allow the product to cool down before
cleaning.
• Touching hot surfaces may cause burns.
Do not use the product near walls or furniture.
• Steam or heat may damage, discolor or deform walls or
furniture.
Do not swivel or move the product while
dispensing water.
• Hot water may splash out, resulting in scalds.
Do not place or use the product on unstable surfaces.
• Doing so may cause scalds or injuries.
Do not use on heat sensitive rugs.
• Doing so may cause fire.
Do not attempt to dispense hot water while it is
boiling.
• Hot water can spurt out, resulting in scalds.
Do not use other Power Cords than the one provided.
Do not use the Power Cord for other appliances.
Do not use the Power Cord for overseas models.
■ Doing so may cause malfunction or fire.
Do not place the product over direct flame (such
as a gas stove top), or on top of electric or
induction heating (IH) cookers.
• Doing so may cause fire, breakdown or damage of the
product.
Unplug the Power Plug from the outlet when the
product is not in use.
• Leaving the Power Plug in an outlet may cause the
insulation to become damaged, resulting in electric
shock, short circuit or fire, or result in injuries or scalds.
Do not touch the Lid Lock when carrying the product.
• Doing so may cause the Upper Lid to open, resulting in
injuries or scalds.
Always unplug the product by holding the Power
Plug, not by pulling the Power Cord.
• Pulling the Power Cord to unplug the product may
cause electric shock, short circuit or fire.
If the Power Cord is damaged, it must be replaced
by an appropriate cord or assembly made
available by the manufacturer or its service agent.
IMPORTANT
Do not operate the product when it is empty.
• Doing so may burn or damage the product.
Avoid rough handling, dropping or bumping the
product.
• Doing so may cause damage or cease operation of the
product.
Avoid letting steam make contact with cabinets and
walls when using near or under a kitchen shelf.
• Doing so may cause discoloration or deformation.
Allow the product to dry completely when storing
the product for a long period of time where it may
freeze.
• If water left inside freeze, it may cause breakdown or
malfunction.
Avoid using the product near a radio, TV, computer, etc.
*The product may cause interference with certain electronics.
Do not drag the product over any surface while
attempting to move.
• Doing so may cause damage to surfaces such as
countertops.
Do not allow hot water to come into contact with
the Control Panel or the Water Level Gauge.
• Doing so may cause breakdown of the product.
Do not use the product where its steam may come
into contact with other electrical appliances.
•The steam may cause fire, malfunction, discoloration or
deformation to other electrical appliances.
This appliance is intended to be used in household.
4
SPECIFICATIONS
r Model No.
C D -W C C 3 0 K T ^
Capacity
101 oz. (3.0 liters)
Rating
AC 120 V 60 Hz
Electric Consumption 700 W
Average Power
Consumption
during Keep
Warm
208°F (98°C)
Approx. 41 W
195°F (90°C)
Approx. 34 W
175°F(80°C) Approx. 28 W
160°F (70°C)
Approx. 23 W
1 Length of the Power Cord
2'11" (0.9 m)
External
Dim ensions
(approx. inches)
8-H (W )x11-K (D)x11-J*(H)
(approx. cm) 21 (W ) x 2 8.5 (D) x 29 (H)
^Weight (including tlie Power Cord) Approx. 5 lbs. (2.3 kg) j
•T h e average Keep Warm electric power consumption is for one hour, provided that the Water Tank
is full and the room temperature is approximately 73°F (23°C).
•T h e height refers to the product when the handle is down.
• I n high altitudes or severely cold areas, the product may not perform as specified. Avoid using the
product in such areas or in other extreme conditions.
•T h is product is not suitable for use in countries or regions with different power supply voltages or
frequencies.
5
PARTS NAMES AND FUNCTIONS
6
T
he rattling or metallic noise you
may hear when opening or closing
the Upper Lid or during boiling is
normal, (see pg-20)
Inner Lid Gasket
(Expendable Part)
• If the Inner Lid Gasket hardens, changes shape,
turns white, or otherwise becomes worn out, please
replace it with a new one. (Separate charge
required.) (see pg.16)
Not doing so may cause hot water to leak when the
product is tilted or tipped over, resulting in scalding.
Steam leaking from the gap may also cause burns
or product failures.
Lid Lock
Steam Vent
•Exercise care during the
boiling process as steam
emitting from the Steam
Vent is very hot.
W
ater Removal Area
•D rain water here.
Maximum Water Level Line
Water Tank
(Nonstick Coated)
Control Panel
Spout
•H o t water dispenses from here.
Water Level Gauge
REFILL Line
•F ill water above the line.
Filter (Expendable Part)
•F or care and use instructions,
see pg.16.
•D o not let the Power Cord
wrap around the Body
when turning.
T
•
Please remove the twist tie holding the Power Cord before use.
•D o not use the Power Cord bundled up. Doing so may cause
the Power Cord to become excessively hot, resulting in
malfunction.
Power Plug
wist Tie
PARTS NAMES AND FUNCTIONS (cont.)
CONTROL PANEL
•P ress buttons down firmly.
•T h e Notification Sounds and raised dot ( • ) in the center of the
DISPENSE button is provided for those with visual impairment.
D
ISPENSE button
Press to dispense hot water, (see pg-10,15)
QUICK TEMP light
________
CAFÉ DRIP light
UNLOCK light
BOIL light
UNLOCK button
REBOIL/QUICK TEMP
button
_______________
Starts the Reboil mode, (see pg.11)
Sets the Quick Temp mode
(seepg.14)
Also used when
performing the
Citric Acid Cleaning
(to initiate cleaning,
press this button for
more than 3
seconds).
(seepg.17)
TEMP SET button
Sets the Keep Warm
temperature, (see pg-12)
Press once to unlock, (see pg-10)
Press twice to activate the Café
Drip Dispensing mode, (see pg.15)
Hold for at least 3 seconds to
change the Notification Sound.
(see pg.15)
KEEP WARM light
LCD display shows the water
temperature and Timer settings.
ENERGY-SAVING TIMER
button
_______________
Sets the Energy-Saving
Timer function, (see pg-14)
NOTE: Illustration is for reference only. Actual display
will not show all functions simultaneously during use.
H
ow to Open/Close the Upper Ud
To Open
Q
P
P
r
r
e
e
s
s
s
s
t
th
h
e
e
i
i
n
n
d
d
e
e
n
n
t
t
e
e
d
d
a
ar
re
e
a
a
o
o
f
f t
th
h
e
e
Lid Lock with your thumb.
0
Pull the Lid Lock up with your
fingers to open the Upper Lid.
To Close
Depress the Upper Lid until it
clicks shut.
Q
I How to Detach/Attach the Upper Lid
To Detach
Indented area of
the Lid Lock
Lid Lock
Q Open the Upper Lid to about
a 45-degree angle.
0
Push the Upper Lid Detach
button.
0
Pull the Upper Lid forward
and up at an angle.
To Attach
Push the Upper Lid back into
place at the same angle.
7
BOIL MODE
t
Open the Upper Lid and fill
the Water Tank with water
using a pitcher or other container
|
To monitor the amount of
water you are filling, look at
the thickness of the stripes on
the Water Level Gauge.
Maximum
Water
Level Line
v
When the Water Tank
is empty.
Water
Level - 1
Gauge
The stripes on the
Water Level Gauge
appear thicker when
water is added.
<!En^
•D
o
not fill the W ater
Tank directly from a
water faucet or
place the product on
a wet surface such
as a sink. (Exposing
the heating element
directly to water may
cause malfunction.)
•A v o id splashing
water on other than
the W ater Tank such
as the Control
Panel. (May cause
malfunction.)
r
2 Close the Upper Lid and connect the Power Cord.
C
l
ose the U pper Lid
securely.
(
To ensure safe operation w hile'
boiling and to prevent scalds if
the product is overturned. ,
I
t automatically starts the boiling
process.
The BOIL light turns on and the Display
sh
ows the water temperature.
Below 170°F: The Display shows the
w
ater temperature in 10°F increments.
Above 175°F: The Display shows
r
i75j - ri8oj - ri85j - n9oj - ri95j
- T200J - T205J - T212J.
B
e sure to insert the
Power Cord securely.
Otherwise, may cause
electric shock, short
circuit, smoke or fire.
2
08
I195I
175
4
m
4
*u
I
160
J
»H
ow to set the Quick Tem p mode:
(seepg.14)
»D
o not allow the end of the
Appliance Plug to get soiled with
dust or come into contact with
metal objects such as pins.
8
■ Tempera :ure
Convers on Guide
Fahrenheit (°F)
Celsius (°C)
212
100
208 98
195 90
175 80
160 70
73 23
BOIL MODE (cont.)
The first tim e
you use the product you
may notice the sm ell of
plastic. This is normal
will gradually
•D o not fill over the Maximum Water
Level Line. (Hot water may overflow
from the Spout or the Steam Vent,
resulting in scalds.)
•D o not fill the Water Tank with hot
water. (The Automatic Shut-Off function
may be activated.) (see pg.11)
•D o not fill the W ater Tank with any
liquid other than water.
•D o not use water additives such as
charcoal for water purification or
mineral additives. (Small particles may
get clogged inside of the product.)
•If you wish to shorten the completion
time, add less water to the W ater Tank.
•A
t your initial use or when
using the product after a long
period of storage:
Fill the Water Tank with water to the Maximum Water
Level Line (a m a x ), and boil water as directed. Once it
reaches a boil, press the UNLOCK button, then press the
DISPENSE button to dispense about 34 oz. (1 liter) of hot
water in order to rinse the water route, and dispose the
remaining water. Fill with fresh water.
(Always remember to attach the Filter.)
•When using mineral or alkaline ionized water:
When mineral or alkaline ionized water is used, a floating
residue may develop or a milky white substance may form
on the surface of the Water Tank. This is due to the
ingredients in the water and is harmless to your health.
Frequent cleaning is recommended.
How to change the Notification Sound
from a melody to a beep, (see pg.15)
When boiling has completed, a melody
sounds and it automatically switches
to the 195°F Keep Warm mode.
The BOIL light turns off, the KEEP WARM
light turns on and "212" appears on the
Display.
How to set the Keep Warm mode:
208°F Keep Warm Mode (see pg.12)
175°F Keep Warm Mode (see pg.12)
160°F Keep Warm Mode (see pg.13)
T
ime required to boil water:
Approx. 31 minutes
(A
t a room temperature of 73°F with the
Water Tank filled to the Maximum Water
Level Line with water temperature at 73°F.)
* Includes approx. 4 minutes to
dechlorinate.
Length of time until the water
temperature reaches about 195°F:
Approx. 25 minutes
(At a room temperature of 73°F with the
Water Tank filled to the Maximum Water
Level Line.)
•T he length of time for the water
temperature to reach 195°F will vary
depending on the temperature of the
room and water.
•A d
d water when the water level is
low during the Keep Warm mode.
(The product automatically begins
heating the water.) If the water level
is still not high enough, it will not
automatically switch to Boil. In this
case, press the REBOIL/QUICK
TEMP button to manually start the
process, (seepg.11)
•P le ase follow the instructions below
to prevent the risk of scalding:
• Do not cover the Steam Vent with a
cloth.
■ Do not touch the Steam Vent or
bring your hands or face near the
Steam Vent.
■ Do not open the Upper Lid while
the BOIL light is on.
■ Do not dispense hot water while it
is boiling.
9
DISPENSE HOT WATER
r
J Press the
button.
^
)
^
hórtbeeji)
^ ( unl ock)
I
\
T
he UNLOCK light turns on and
hot water can be dispensed.
® ---------------------------------------
>D
o
not unlock and press the
DISPENSE button if the Water Tank
is empty.
Press the
button to dispense hot water.
D
o
not swivel the product while dispensing water.
•Initially upon boiling or if it has been a while after dispensing, the
water may not be very hot. Please discard the first cup (of the hot
water).
•D o not attempt to dispense hot water while boiling.
•W ater may not dispense smoothly shortly after boiling. Wait for a
short period of time before dispensing hot water again.
•B e careful as the product heats up during the Boil and Keep Warm
modes.
DISPOSE WATER
Dispose leftover water when the product is not in use.
and detach the Upper Lid.
W
hen detaching the Upper Lid:
•Take precaution with the steam.
You may scald yourself.
__
2
H
old the product with both hands and dispose water where indicated
"EMPTY FROM HERE" on the wall of the Water Tank.
H
old the Handle securely.
W
hen disposing hot water:
_
•T
ake precaution with the
hot water and steam.
You may scald yourself.
•Take precaution as hot
water may drip from the
Spout, causing scalds.
10
_______
y
T
urns off
^(U N LO C K ]
1
0 seconds after dispensing,
the UNLOCK light turns off
and the Automatic Dispense
Lock is activated.
Automatic Dispense Lock
A safety function to prevent hot water
from dispensing if the DISPENSE
button is accidentally pressed.
•E ven if no water is dispensed, the
Automatic Dispense Lock will be
activated after about 10 seconds.
Do not tilt or shake the
product after dispensing. Hot
water may drip from the Spout,
causing scalds.
r
Reboil Mode
This function is used when reboiiing
water in the Keep Warm mode.
Press the
^
\
Th
e BO IL light turns on when
the boiling process begins.
Time required to
finish reboiling
(At a room temperature of
73°F (23°C) with the Water
Tank filled to the Maximum
Water Level Line.)
208°F Keep Warm Mode
Approx. 3-4 minutes
195°F Keep Warm Mode
Approx. 5-8 minutes
When the Reboil process is completed,
a melody sounds and the product
switches to the Keep Warm mode.
•Pressing the REBOIL/QUICK TEMP button twice activates the
Quick Temp mode, (see pg.14)
•D o not attempt to dispense hot water while reboiling.
•W ate r may not dispense smoothly shortly after boiling. Wait for
a short period of time before dispensing hot water again.
>M
a
ke sure the water level is above the REFILL Line
before pressing the REBOIL/QUICK TEMP button.
4 m
•D
o not plug or unplug the
Power Plug or Appliance Plug
with wet hands. (Doing so
may cause short circuit or
electric shock.)
•D o not dispose hot water with
the Upper Lid in place. (The
Upper Lid may come off,
spilling hot water and causing
scalds.)
•D o not allow water to splash
on the Control Panel, Hinge,
Handle or Receptacle. (Could
cause scalding or
breakdown.)
•T a ke precaution as not
attaching the Filter properly
may cause it to fall out when
dispensing hot water.
•Dispose the water at least
once a day. (Leaving water in
the Water Tank can cause
unwanted odor or scale
build-up.)
s
- Automatic Shut-Off Function
•B
e
careful not to
repeat the boiling
process without
filling the Water
Tank with water,
as the Nonstick
Coating may
discolor and peel.
The Automatic Shut-Off function activates to shut down power to the
heater in order to prevent damage from overheating. The Display will
show "HH" and beeps will sound to alert you that the Automatic Shut-Off
has been activated. The following conditions may cause activation:
•W hen plugged in without filling the Water Tank with water.
•W hen the water level is lower than the REFILL Line and boiling
has been attempted.
•W hen the Water Tank is empty or the Upper Lid is left open for
adding water.
•W hen pouring in hot water immediately after plugging in the unit.
U
n
plug the product. Allow the Water Tank to
cool. Fill the Water Tank with water above the
REFILL Line and plug back in.
11
HOW TO SET THE KEEP WARM MODE
Press the (m ) button to
change the settings.
Each press of the button changes the position
of the " i " on the Display.
195
M
208
M
195
M
175
M
160
208°F Keep Warm Mode I
208°F is ideal for making coffee, tea and
instant noodles.
Select the "208" on the Display.
T
urns off
208
11951
175
O
C iC
160
W
hen the boiling process has completed,
a m elody sounds, the BOIL light turns off
and the KEEP W ARM light turns on.
I
2
08
11951
175
4 j W Q
c u o
I
160
J
W
hen the w ater
tem perature reaches
208°F, "208" appears on
the Display.
^Depending on the altitude where the product
is used, the Keep Warm mode may be set at
205°F-207°F, in order to prevent continuous
boiling.
175°F Keep Warm Mode
175°F is ideal for making Japanese
(green) tea.
Select the "175" on the Display.
W
hen the boiling process has completed, a
melody sounds, the BOIL light turns off, and
the KEEP W ARM light begins to blink.
/ if initiated during the Keep Warm mode, the \
^ light will blink 2 seconds after the selection. /
When the water
tem perature reaches
about 175°F, "175"
appears on the Display,
and the KEEP WARM
light stops blinking and
remains on.
T
urns on
W
hen water is boiled in the Quick Temp mode,
the KEEP WARM light does not blink but turns
on. (see pg.14)
I Length of tim e for the w ater temperature to
reach 175°F after boiling:
Approx. 1 hour and 10 minutes
(At a room temperature of 73°F with the Water Tank
filled to the Maximum Water Level Line.)
•T h e length of time for the water temperature
to reach 175°F will vary depending on the
room temperature and amount of water.
12
HOW TO SET THE KEEP WARM MODE (cont.)
(|h o rt beejj) ^
( m a r t
.......
<
.........
2 0 8
(195)
1 7 5
% i n
Í n j
< - - - ^ >
.....
k
1 6 0
/ / You will hear 2 short beeps when the
195°F Keep W arm mode is selected.
•Y ou can change the temperature setting during
the Keep Warm mode.
(It may start reboiling depending on the water
temperature and the selected setting.)
•Y ou cannot select the 208°F Keep Warm mode
while the Quick Temp mode is selected.
160°F Keep Warm Mode
160°F is ideal for preparing baby formula.
Select the "160" on the Display.
Turns off
Blinks
208
ff95l
175
j> o
c <c
160 J
• If you wish to shorten
the time, add less water
to the Water Tank.
Fill water up to 1.0 on
the Water Level Gauge.
W hen the boiling process has completed, a
m elody sounds, the BOIL light turns off, and the
KE E P W A R M light begins to blink.
/ If initiated during the Keep Warm mode, the light
will blink 2 seconds after the selection.
)
\
2 short beeps)
x 2 times.
Turns on
When the water
temperature reaches about
160°F, "160" appears on
the Display and the KEEP
WARM light stops blinking
and remains on.
/ \
■Leng th of time for the water temperature to
reach 160°F after boiling:
V
______________________1
_______________________
/
(T
EMP SET)
208
(1951
175
ic n
(Du
▼
1 6 0
__
J
1.0
L Max Capacity
Approx. 1 hour
Approx. 2 hours and 10 minutes
(At a room temperature of 73°F.)
•The length of time for the water temperature to
reach 160°F will vary depending on the room
temperature and amount of water.
If the Power Cord is detached:
•R e insert the Power Cord if it is accidentally
detached.
• I f the cord is detached for more than a few
minutes and reinserted, the product returns to
the 195°F Keep Warm mode and may start
reboiling automatically.
■Temperature
Conversion Guide
Fahrenheit (°F)
Celsius (°C)
212
100
208 98
207 97
205 96
195 90
175 80
160 70
73 23
13
QUICK TEMP MODE
This function heats the water to the selected Keep Warm temperature without reaching a boil. The water will reach the
selected Keep Warm temperature quicker than the Regular Boil mode. Other benefits include reduced steam and
reduced energy use. Use this mode when dechlorination is not necessary, such as when using bottled or purified water.
1
W
hile the water is heating, press
the ( ^ ) button to select the
Quick Temp mode.
You cannot activate the Quick Temp mode while the product is
set at the 208°F Keep Warm mode. Select the 195°F, 175°F or
160°F Keep Warm mode, then select the Quick Temp mode.
Y
o
u cannot select the 208°F Keep Warm mode while the Quick Temp mode is activated.
►There may be a lingering chlorine smell if tap water is used while the Quick Temp mode is activated. If
this is an issue, use the Regular Boil mode instead.
►Depending on the room temperature and amount of water, the actual water temperature after heating
may differ from that shown on the Display.
►Depending on the temperature of the room and water, and atmospheric pressure, some steam may be
produced.
►The Quick Temp mode may be canceled if the product is left unplugged for several minutes. Set to the
desired mode again.
►The product begins the Regular Boil mode when water is added. Activate the Quick Temp mode again.
2
After reaching the selected temperature,
it will automatically switch to Keep Warm.
195°F, 175°F Keep Warm mode:
After reaching the selected
temperature, a melody
sounds, the QUICK TEMP
light turns off and the KEEP
WARM light turns on.
I
160°F Keep Warm mode:
Each press of the
REBOIL/QUICK TEMP button
changes the boil mode.
r» I Regular Boil mode (Default)] -i
L-1 Quick Temp mode
Holding the REBOIL/QUICK TEMP
button for more than 3 seconds
activates the Citric Acid Cleaning
mode, (see pg.17)
f j m « H Turnsoff
U u i c k t e h p 7 t í m p
Turns on
►
When the water temperature
reaches about 175°F (80°C),
a melody sounds, the
QUICK TEMP light turns off
and the KEEP WARM light
begins to blink.
When
the
water temperature
reaches about 160°F (70°C),
the KEEP WARM light
remains on.
?
v
l
Turns on
Length of time for the water
temperature to reach 160°F
(70°C) after 175°F (80°C) is
approx. 40 minutes. (At a room
temperature of 73°F (23°C) with
the Water Tank filled to the
Maximum Water Level Line.)
•W
a
ter does not reach a boil under the Quick Temp mode, and should not be used to prepare baby formula.
•Although the water will not reach a boil when the Quick Temp mode is activated, the Steam Vent will
become hot. Please do not touch it.
ENERGY-SAVING TIMER FUNCTION
The Boiling function will complete at the set time.
Setting the Energy-Saving Timer function before going to sleep at night or before long idle period will help to
save energy by shutting off electricity to the heater.
Press the (™>er) button until the desired length of time is displayed.
I
%You will hear 2 short beeps when 6H is selected.
melody sounds and the Energy-Saving
T
TÍ
i
,
mer function is activated.
The Display shows the remaining time. Once the boiling
process begins, it is replaced with the water temperature.
The Boiling function will complete at the set time.
A melody sounds, the BOIL light turns off and the product
switches to the Keep Warm mode, (see pg.9,12,13)
Boiling may stop earlier than the set time, depending on room
temperature, water temperature and amount of water.
V.
Ea
ch press of the TIMER button changes the set time.
(H for hours)
__________________________
( 6 H 7H 8H -* 9H
T
iq h )
Cancel (temperature display) <■
►If
the product is idle for about 2 seconds, the time
currently displayed will be applied.
►To
cancel the Timer, press the TIMER button several
times until the temperature appears on the Display, or
press the REBOIL/QUICK TEMP button once.
►When using the Quick Temp mode with the
Energy-Saving Timer function, set the Energy-Saving
Timer function after selecting the Quick Temp mode,
►if the Power Cord is detached, the Energy-Saving
Timer function will be canceled and must be reset.
14
CAFE DRIP DISPENSING MODE
T
his mode decreases the amount of water dispensed to 60% of the normal setting, making it suitable for
brewing café drip coffee.
1
Press the (unl ock;
button twice.
When the CAFÉ DRIP
light turns on, the Café
Drip Dispensing mode
is activated.
•P
ressing the UNLOCK button again during the Café
Drip Dispensing mode will reset the product to the
normal dispensing mode.
•When the CAFÉ DRIP light turns off, the Automatic
D
ispense Lock is activated.
Ilf the water level is low, it may take longer for water to
b
egin dispensing after pressing the DISPENSE
button, or water may not dispense smoothly.
•Water may not dispense smoothly just after boiling
h
as completed. In this case, wait for a short period of
time before dispensing hot water again.
2
P
r
e
s
s
t
he jiSPENSE^
button to dispense
hot water.
You can use the Café
Drip Dispensing mode
for about 60 seconds
while the CAFÉ DRIP
light is on.
T
urns on
Q
•B
e careful not to burn yourself.
• I f using a cone filter placed directly on a cup, be
c
areful not to let it fall inside the cup while brewing.
•T h e first cup of water may not be hot enough just after
b
oiling has completed, or when you have not
dispensed water for a while. Discard a cup of hot
water before brewing.
• I f the cup or other container that you use is cold, the
h
ot water may cool quickly. To prevent this, warm the
container before use.
V .
HOW TO CHANGE THE NOTIFICATION SOUND
•Notification Sound:
The product notifies you with a melody or beeps that it has finished boiling or the timer has been set.
When and what types of Notification Sounds are heard:
When
Jy p e s of Notification
S
ound
(Default)
Beeping
Boiling stops Minuet
5 long beeps
X
Timer is set
Beautiful Dreamer
X X
The tone that indicates button inputs will sound even when Silent is selected.
How to change the Notification Sound:
Í Hold the button for more than 3 seconds during the boiling process or
th
e Keep Warm mode.
Each time the UNLOCK button is held for more than 3 seconds, the Notification Sound will change.
1
2
S
etup is complete when the desired sound (melody or beep) is heard.
•T h e Notification Sound will return to Melody if the product is unplugged.
15
A
lways unplug the Power Cord,
dispose all water, and allow to cool
completely before cleaning.
'
#Do
not attempt to dry the product by turning it upside down when the bottom is wet. (Water may get inside
the Body and cause it to break or rust.)
•D o not use the following:
■ Thinner and bleach. (Doing so may cause discoloration, crack, degradation and corrosion.)
■ Polishing powder, nylon brushes, anything made with metal, eraser pads, hard nylon sponges and abrasive cleaners. (Doing so may
cause corrosion.)
■ Detergent. (Hot water may spill out, resulting in scalds or damage. Doing so may cause unwanted odor.)
•D o not use scrub brushes for any portions other than the Filter. (Doing so may cause corrosion.)
•When using chemically treated cloths, do not rub too hard or leave them on the product for a long time as the surfaces of the product may be
damaged by chemical reactions.
•D o not use a dishwasher or dish dryer for cleaning or drying. (Doing so may cause the plastic parts to deform.)
•Before storing the product for a longer period of time, dry it completely and pack in a plastic bag to prevent odors from being absorbed.
v •Never wash the Body, Upper Lid, or Power Cord with water.
________________________________________________________
Inner Lid
Wipe with a soft wet sponge.
Water Tank
I J—
I
Perform the Citric Acid Cleaning
(
see pg.17) periodically.
Especially when...
•R ed rust spots (rust stain) is visible on the Water Tank.
•M ilky white or gray discoloration and/or filmy objects
a
re found in the water.
•Boiling is louder than usual.
•H o t water has an odor.
(The condition of the Water Tank will vary depending on the
wate
r quality and frequency of use.)
Filter
Remove the Filter from the Water
T
ank and wash with a soft brush.
Pull the Filter up to release, and press
d
own firmly to attach,
if you find it difficult to clean the Filter, replace
it
with a new one, (see pg.17)
•Never use the product without installing the Filter.
(The Filter prevents foreign objects from entering the water
r
oute or Electric Pump and obstructing the flow of hot water.)
Wipe clean with a dry cloth.
Body/Upper Lid
Wipe clean with a
d
amp
well-wrung cloth.
»Do not get water on or wash the Control
Panel
or Water Level Gauge. (If water gets
inside, it may cause malfunction or rust.)
HOW TO REPLACE THE INNER LID GASKET
The Inner Lid Gasket may need to be replaced due to time and
we
ar. We recommend that you replace it about once a year.
Wipe new Inner Lid Gaskets with a wet soft sponge before attaching to the Inner Lid.
To remove the Inner Lid Gasket
©Rem ove the three screws, and remove the Inner Lid.
•B e careful not to lose these screws.
©Remove the Inner Lid Gasket which is installed on the
I
nner Lid.
After removing the Inner Lid, check the plastic part of
t
he Upper Lid for abnormalities.
-H f this part is discolored or if it feels rough to the touch,
r
eplace it (there will be a fee for this).
When the Inner Lid Gasket
ha
rdens, changes shape,
turns white, or otherwise
becomes worn out.
Hole on the Screws (x3)
Inner Lid
Please purchase
and replace with
a new one.
To attach the Inner Lid Gasket
© F it the Inner Lid Gasket securely to the outer
c
ircumference of the Inner Lid as shown in the figure.
©Line up the pin on the Upper Lid with the hole on the
I
nner Lid, and tighten the three screws securely.
If the Inner Lid Gasket hardens, changes shape, turns white, or otherwise
b
ecomes worn out, hot water may leak from the gap between the Upper Lid
and Body when tilted. Steam may also leak from the gap, causing burns
and product failures, which may result in scalds. If hot water spews from
the gap or there is steam even after replacing the Inner Lid Gasket, other
parts may be in need of repair. Please contact Zojirushi Customer Service.
16
Perform every 1-3 month(s) of usage
CITRIC ACID CLEANING
i
I
n
order to prevent gas bubbles and bubbling-over, the Citric Acid Cleaner for
Electric Water Boilers (CD-K03E-JU) is recommended for cleaning. To purchase
this cleaner, please visit an authorized Zojirushi dealer or www.zojirushi.com.
C M u
Do not drink
the water used
for citric acid
cleaning.
r ---------------------------------------------------------------------------------------------------
Preparation:
Check that the Filter is attached
to the Water Tank.
_
*
<S
>
------------------------------------------------\
• I f
the Filter is dirty, remove it from the
Water Tank, wash with a soft brush and
reinstall.
A Put 1 package of the Citric Acid Cleaner
CD-K03E-JU in a cup and add warm water to
dissolve. Pour it into the Water Tank and fill
with water to the Maximum Water Level Line.
I
s
•D o
not fill over the Maximum Water Level Line.
(Hot water may spill out, resulting in scalds.) ^ j
Close the Upper Lid, insert the Power Plug and press the
button for
more than 3 seconds.
Beeps w hen the cleaning p rocess begins.
Be
eps when the cleaning process is completed.
H
Bl
inks
j ( | h õ r t b è è j >
H
Blinks
208
[1951
175
ú - U
V
__
160
C
lea
ning time: ^
Approx. 1.5 hours.
^Cleaning time may vary
dep
ending on the amount
of water, water
temperature and room
temperature.
Unplug the Power Plug, detach the
U
pper Lid and dispose water where
indicated "EMPTY FROM HERE."
(Please take precautions not to splash water
on the Hinge.)
To rinse, fill the Water Tank with water.
B
oil and dispense about a cup of hot
water to rinse out the Spout, allow to
cool, then dispose the remaining water.
To cancel the Citric Acid Cleaning at any time,
u
nplug the Power Plug for more than 5 seconds.
r
•R e
peated citric acid cleaning may be
necessary for hard-to-remove residues or
if water does not dispense smoothly.
When disposing hot water:
•Take precaution with the hot water and
s
team. You may scald yourself.
iTake precaution as hot water may drip
fr
om the Spout, causing scalds.
►If mineral or alkaline ionized water is
use
d, calcium tends to build up on the
surface of the Water Tank. If scale
accumulates on the Water Tank or the
Filter, boiling may become louder than
usual and water may not dispense
smoothly. Frequent cleaning is
recommended when using mineral or
alkaline ionized water.
REPLACEMENT PARTS
•Replacement parts may be available for an additional
c
harge. Please replace damaged parts only with new parts.
•When purchasing parts, please record the model number
a
nd part name beforehand. Parts can be purchased
through Zojirushi.com, by contacting Zojirushi Customer
Sen/ice, or the store where you purchased the product.
Zojirushi Customer Service
1-800-733-6270 www.zojirushi.com
Part Names Part Numbers
Inner Lid Gasket
625702-00
Filter
627402-00
Citric Acid Cleaner for
Electric W ater Boilers
(1 oz. / 30 g
X
4 packets)
CD-K03E-JU
1
7
Q&A ON PRODUCT USE
is it okay to use the product for
heating liquids other than
water?
Do not fill the product with any liquid other than water. It may cause
m
alfunction, or may overflow and cause scalding.
pg-3
Does the water need to be
c
hanged every day?
To
prevent odor and scale build-up, please change the water at least
once a day.
p g -
io
Is it
okay to use mineral water
or alkaline ionized water?
Yes. Ho
wever, when mineral or alkaline ionized water is used, a floating
residue may develop or milky white substance may form on the surface
of the Water Tank. This is due to the ingredients in the water and is
harmless to your health. Frequent cleaning is recommended.
pg.
9
P9-17
I a
ccidentally drank water while
performing the Citric Acid
Cleaning. Is this harmful to my
health?
Please
follow the instructions shown on the package of the citric acid
cleaner CD-K03E-JU.
Is it
okay to leave the product
unattended while it is turned
on?
It is safe to use the product unattended as it has the Automatic Shut-Off
f
unction (power to the heater will be automatically turned off), which will
be activated once it is empty of water. However, be careful not to
repeat the boiling process without filling the Water Tank with water, as
the Nonstick Coating may discolor and peel.
pg-11
►
►
“
►
^
^
k
~
^
►
TROUBLESHOOTING GUIDE Please check the following
points before calling for service.
• A
mild plastic odor may be noticeable with a new product. This odor will gradually
fade away.
•Y o u may smell chlorine (used for sterilization of tap water) after boiling.
Water leaks from the Spout
or spills out from the Steam
Vent.
18
TROUBLESHOOTING GUIDE (cont.)
Condition
Steam emits while heating
water using the Quick
Temp mode.
Cause
Remedy
►The Quick Temp mode does not heat water until it boils. However, some steam may
be produced depending on the temperature of the room and water, and the
atmospheric pressure.
The Quick Temp mode
cannot be selected.
Is the 208°F Keep Warm mode
selected?
Select the 195°F, 175°F or 160°F Keep
Warm mode, then select the Quick
Temp mode, (see pg-14)
The 208°F Keep Warm mode
cannot be selected during
the Quick Temp mode.
You cannot select the 208°F Keep
Warm mode during the Quick Temp
mode.
Use the Quick Temp mode for other
than the 208°F Keep Warm mode.
(seepg.14)
Water does not dispense or
does not pour properly.
Hot water does not pour properly a few
minutes after boiling.
Bubbles form from the bottom of the
Water Tank while water is being
heated. Wait for a short period of time
before dispensing hot water again.
Scale or other residue has
accumulated on the Water Tank and
Filter.
Clean the Water Tank and Filter, (see
pg-16)
The Automatic Dispense Lock is
activated.
Press the UNLOCK button, then press
the DISPENSE button, (see pg.10)
The Power Plug is not connected to an
electrical outlet.
Connect the Power Plug.
Scale may build up in the water route
or Electric Pump and prevent water
from dispensing smoothly.
Perform citric acid cleaning.
(seepg.17)
Scale
Over time and use, calcium
and other minerals
contained in water build up
on the surface of the Water
Tank and Filter. It is called
"scale" and is harmless to
your health.
A filmy, floating residue is
noticeable. (Could the
Nonstick Coating be peeling
off?)
Residue is due to the mineral content
in water, not from corrosion of the
Water Tank or peeling of the Nonstick
Coating.
Milky white and
rough-surfaced objects have
built up on the surface of the
Water Tank.
Excessive accumulation of scale and
other build-up on the surface of the
Water Tank can cause boiling to
become louder.
Boiling is louder than usual.
Red rust-like spotting
appears on the surface of
the Water Tank.
Caused by iron in the water, not
deterioration of the Water Tank.
White floating residue is
noticeable.
Remove the Inner Lid and check the
plastic part of the Upper Lid for
abnormalities, (see pg.16)
If this part is discolored or if it feels
rough to the touch, replace it (must
purchase separately).
Water is not hot.
Initially upon boiling or if it has been a
while after dispensing, the water may
not be very hot due to water remaining
in the Water Level Gauge.
Please discard the first cup (of the hot
water).
Is the Timer set?
Press the REBOIL/QUICK TEMP
button.
(see pg.14)
19
TROUBLESHOOTING GUIDE (cont.)
L Condition
) ( Remedy
T
he outer surface of the
product becomes hot.
•W hen the water temperature and/or room temperature is high, the outer surface of
the product may reach up to 140°F (60°C). This is not a malfunction.
The Power Cord becomes
hot.
•T h e Power Cord may become hot while the water is boiling. This is not a
malfunction.
You may hear a rattling or
metallic noise when
opening and closing the
Upper Lid or during boiling.
•T h is sound is normal and comes from the movement of the weight which prevents
hot water from flowing out when the product is overturned.
Humidity builds in the
Display window or the
Water Level Gauge.
• If water is filled from a faucet or the product is placed directly on a sink and the
bottom becomes wet, water may go inside of the Body and the Display or the Water
Level Gauge may show moisture. This may cause short circuit or electric shock.
Unplug the Power Cord and contact Zojirushi Customer Service.
3
l
i
ghts turn on
and"HH"
appears on the
Display.
T
h
e
Water Tank is low
on water or hot water
was added to the Water
Tank, causing the
Automatic Shut-Off
function to engage.
Unplug the Power Plug and
wait until the Water Tank
cools down. Add water and
plug in the Power Cord.
(seepg.11)
2 lights blink at
the same time
and the
Display shows
a rotating
square.
T
h
e
Water Tank is in a
citric acid cleaning cycle.
To cancel the citric acid
cleaning cycle, unplug the
Power Plug and wait more
than 5 seconds before
plugging back in.
(see pg.17)
Turns on
Turns on
E? . E3 or I I is displayed.
Indicates malfunction.
Please contact Zojirushi
Customer Sen/ice.
I
n
n
er Lid Gasket
►The Inner Lid Gasket is replaceable, and we recommend that you replace it about
once a year. If steam leaks from the gap between the Upper Lid and the Body, or if
the Inner Lid Gasket hardens, changes shape, turns white, or otherwise becomes
worn out, please replace it. (see pg.16)
Plastic Parts
•T h e plastic part of the Upper Lid may deteriorate over use. When replacing the Inner
Lid Gasket, check the plastic part. If discoloration occurs or the surface becomes
coarse, replace the Upper Lid (must be purchased separately). (We take care in only
using materials for the plastic parts that are safe and hygienic for food contact.)
The Nonstick Coating of the Water Tank may become damaged with use. Contact or call Zojirushi
Customer Service to discuss available options we may have for you: 1-800-733-6270
20
