"S? Z0JIRUSHI
M
ICOM WATER BOILER & WARMER
OPERATING INSTRUCTIONS
CD-NAC40 / CD-NAC50
•Always follow basic safety precautions when using electrical appliances. Read all Instructions carefully. Please keep
these Operating Instructions at hand for easy reference.
I
MPORTANT SAFEGUARDS
2 .............................
SPECIFICATIONS
5
..............................................
P
AR
TS NAMES AND FUNCTIONS 6
...................
B
OI
L MODE
8 .......................................................
DISPENSE HOT WATER
.
10
...............................
D
IS
POSE WATER 10 ............................................
REBOIL MODE 11 .................................................
AUTOMATIC SHUT-OFF FUNCTION
11
..............
H
OW
TO SET THE KEEP WARM MODE 12
.......
Q
UIC
K TEMP MODE 14 .......................................
ENERGY-SAVING TIMER FUNCTION 14 ............
CAFÉ DRIP DISPENSING MODE
.
15
..................
H
OW
TO CHANGE THE NOTIFICATION SOUND 15
......
C
LE
ANING AND MAINTENANCE 16
...................
• H
OW
TO REPLACE THE INNER LID GASKET 16
......
H
OW
TO PERFORM CITRIC ACID CLEANING 17
......
RE
PL
ACEMENT PARTS 17 ..................................
Q&A ON PRODUCT USE 18
................................
T
ROUB
LESHOOTING GUIDE 18
.........................
ZOJIRUS
HI CORPORATION
IMPORTANT SAFEGUARDS
BASIC SAFETY PRECAUTIONS SHOULD ALW AYS BE FOLLOWED WHEN
USING ELECTRICAL APPLIANCES, INCLUDING THE FOLLOW ING:
1. Read all instructions thoroughly.
2. Avoid touching hot surfaces and do not close or clog the steam vent opening under
any circumstances. The handles and knobs are provided for your safety and
protection.
3. To safeguard against fire, electric shock and possible injury, keep the power cord,
plugs and the appliance away from water or other liquids.
4. Close supervision is recommended when any appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow the appliance to
cool before adding or removing parts, and before cleaning the appliance.
6. Do not use or operate any appliance with a damaged cord or plug. If the appliance
malfunctions or has been damaged in any manner, unplug the appliance and return
it to the nearest authorized service facility or dealer for examination, repair or
adjustment.
7. The use of accessories or attachments not recommended by the appliance
manufacturer may result in fire, electric shock or other injury to persons.
8. Do not use outdoors.
9. Keep the power cord away from hot surfaces and do not let the cord hang over the
edge of tables or counters.
10. Do not place on or near a heated surface such as a gas or electric stove, or in a
heated oven.
11. Always use extreme caution when moving an appliance containing hot liquids.
12. The plug to the appliance should be attached first before plugging the cord into a
wall outlet.
13. Do not use the appliance for other than intended or specified purposes.
14. To protect against electrical hazard, unplug the cord before cleaning.
15. Scalding may occur if the lid is removed during boiling cycles.
16. Do not remove the Control Panel or the Water Level Gauge.
SAVE THESE INSTRUCTIONS
THIS AP PLIA N C E IS FOR HO USEHO LD USE ONLY.
A. A short detachable power-supply cord has been provided for your safety. To
reduce risks from entanglement or tripping, a longer cord is not recommended.
B. Extension cords should only be used if care is exercised.
C. If using an extension cord: (1) the marked electrical rating of the detachable
power-supply cord or extension cord should be at least as high as the electrical
rating of the appliance; (2) if the appliance is of the grounded type, the extension
cord should have a ground-type 3-pronged plug; and (3) the longer cord should not
drape over the countertop or tabletop where it can be pulled on by children or
tripped over.
2
IMPORTANT SAFEGUARDS (cont.)
Before use
These WARNINGS and CAUTIONS are intended to protect you and others from personal injury and
household damage. To ensure safe operation, please follow carefully.
WARNINGS
Do not modify the product. Only a repair technician
may disassemble or repair this unit.
■Attempting to do so may cause fire, electric shock or
injury. Make any repair inquiries to Zojirushi Customer
Service.
Do not immerse the product in water or splash it
with water, and do not put it on a wet surface such
as a sink.
* Doing so may cause short circuit or electric shock.
Do not allow liquid to come into contact with the
Receptacle or Power Cord.
* Doing so may cause short circuit or electric shock.
Do not plug or unplug the Power Cord if your
hands are wet.
* Doing so may cause electric shock or injury.
Do not touch the Steam Vent or bring your hands
or face near the Steam Vent.
* Doing so may cause burns or scalding. Take special
precautions with children and infants.
Do not cover the Steam Vent with anything such
as a dishcloth.
* Hot water may spill out, resulting in scalds. It may also
cause deformation or discoloration of the Upper Lid or
breakdown of the product.
Do not allow children to use the product
unsupervised. Keep it out of the reach of infants.
* Children are at risk of burns, electric shock or injury.
Do not fill over the Maximum Water Level Line.
* Overfilling may cause hot water to spill out, resulting in
scalds.
Always remove the Upper Lid before disposing
hot water.
* The Upper Lid may fall off and cause hot water to splash,
resulting in scalds.
Do not tilt or shake the product or carry in your
arms. Do not move it or drain hot water by holding
the Upper Lid.
* Doing so may result in scalding by hot water spilling out
from the Spout or Steam Vent, even if the Automatic
Dispense Lock is on. Always use the handle when
carrying.
Do not tilt the product or tip it over.
* Hot water may spill from the Spout or Steam Vent,
even if the Automatic Dispense Lock is on.
Do not slam the Upper Lid when closing.
* Hot water may dispense or spill out, resulting in scalds.
Do not use the product if the Power Plug or Power
Cord is damaged or if the Power Plug is loosely
inserted into the electrical outlet.
* Doing so may cause electric shock, short circuit or fire.
Close the Upper Lid securely.
* Hot water may spill out when the product is overturned,
resulting in scalds.
Do not remove the Upper Lid while boiling.
Do not damage the Power Cord.
* Do not bend, pull, twist, fold, or attempt to modify the
Power Cord. Do not place it on or near high
temperature surfaces or appliances, under heavy items
or between objects. A damaged Power Cord can cause
fire or electric shock.
Do not use the product as a cooler or place ice
inside of it.
* Doing so may cause condensation, resulting in electric
shock or breakdown of the product.
Do not allow the end of the Appliance Plug to
become soiled with dust or come into contact with
any metal objects.
* Doing so may cause electric shock, short circuit or fire.
Do not allow infants or children to put the
Appliance Plug in their mouth.
* Doing so may cause electric shock or injury. Take
special precautions with children and infants.
Insert the Power Plug completely and securely
into the electrical outlet.
* A loosely inserted Power Plug may cause electric
shock, short circuit, smoke or fire.
Use only an electrical outlet rated at 15 amperes
minimum, and do not plug other devices into the
same outlet.
* Plugging other devices into the same outlet may cause
the electrical outlet to overheat, resulting in fire.
If the blades or surface of the Power Plug become
soiled, wipe them clean.
•A dirty Power Plug may cause fire.
Do not use a power source other than 120 V AC.
* Use of any other power supply voltage may cause fire
or electric shock.
Do not boil anything other than water.
* Attempting to boil, cook, or heat up the following items
may cause bubbling or boiling over, which may cause
scalding. Doing so may also cause clogging of the water
route or Electric Pump, corrosion of the Inner Container,
or peeling of the Nonstick Coating.
■ Milk, sake, soup, charcoal, tea bags or tea leaves.
* Instant food.
■ Food and sauce pouches or foods in plastic bags.
Replace the Inner Lid Gasket if it hardens, changes
shape, turns white, or otherwise becomes worn out.
* Hot water may spill out when the product is tilted or
tipped over accidentally, and may cause scalding.
Steam may also leak out from the gap and cause burns
or product failures.
•The illustrations used in these Operating Instructions may vary from the actual product you have purchased.
3
IMPORTANT SAFEGUARDS (cont.)
This product is not intended for
use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of the
product by a person responsible
for their safety. Children should
be supervised to ensure that they
do not play with the product.
Stop using immediately if you notice any of the following symptoms
indicating a malfunction or breakdown.
• Continued use of the product may cause smoke, fire, electric shocks or injury.
• The Power Plug or Power Cord has become very hot.
• The Power Cord is damaged or the electricity turns on and off when touched.
■ The Body is deformed or unusually hot.
• Smoke is arising from the product or there is a burning smell.
• Some parts of the product is cracked, loose or unstable.
• The product emits steam for at least 10 minutes continuously and does not
turn to Keep Warm mode.
• Water leaks from the Body.
If any of the above occurs, unplug the product immediately and return to
Zojirushi Customer Service for check-ups and/or repairs.
CAUTIONS
Always use caution when opening the Upper Lid
and avoid skin contact with steam.
• Loose water or steam may escape upon opening the
Upper Lid and cause scalds.
Do not touch hot surfaces during or for a short
period of time after use.
• Touching hot surfaces may cause burns. Be especially
careful with metal parts such as the Inner Lid and the
Inner Container.
Please allow the product to cool down before
cleaning.
• Touching hot surfaces may cause bums.
Do not use the product near walls or furniture.
• Steam or heat may damage, discolor or deform walls or
furniture.
Do not swivel or move the product while
dispensing water.
• Hot water may splash out, resulting in scalds.
Do not place or use the product on unstable surfaces.
• Doing so may cause scalds or injuries.
Do not use on surfaces that are sensitive to heat.
• Doing so may cause fire.
Do not attempt to dispense hot water while it is
boiling.
• Hot water can spurt out, resulting in scalds.
Do not use other Power Cords than the one provided.
Do not use the Power Cord for other appliances.
Do not use the Power Cord for overseas models.
• Doing so may cause malfunction or fire.
Do not place the product over direct flame (such
as a gas stove top), or on top of electric or
induction heating (IH) cookers.
• Doing so may cause fire, breakdown or damage of the
product.
Unplug the Power Plug from the outlet when the
product is not in use.
• Leaving the Power Plug in an outlet may cause the
insulation to become damaged, resulting in electric
shock, short circuit or fire, or result in injuries or scalds.
Do not touch the Lid Lock when carrying the product.
• Doing so may cause the Upper Lid to open, resulting in
injuries or scalds.
Always unplug the product by holding the Power
Plug, not by pulling the Power Cord.
• Pulling the Power Cord to unplug the product may
cause electric shock, short circuit or fire.
If the Power Cord is damaged, it must be replaced
by an appropriate cord or assembly made
available by the manufacturer or its service agent.
IMPORTANT
Do not operate the product when it is empty.
• Doing so may burn or damage the product.
Avoid rough handling, dropping or bumping the
product.
• Doing so may cause damage or cease operation of the
product.
Avoid letting steam make contact with cabinets and
walls when using near or under a kitchen shelf.
• Doing so may cause discoloration or deformation.
Allow the product to dry completely when storing
the product for a long period of time where it may
freeze.
• If water left inside freeze, it may cause breakdown or
malfunction.
Avoid using the product near a radio, TV, computer, etc.
• The product may cause interference with certain electronics.
Do not drag the product over any surface while
attempting to move.
• Doing so may cause damage to surfaces such as
countertops.
Do not allow hot water to come into contact with
the Control Panel or the Water Level Gauge.
• Doing so may cause breakdown of the product.
Do not use the product where its steam may come
into contact with other electrical appliances.
•The steam may cause fire, malfunction, discoloration or
deformation to other electrical appliances.
This appliance is intended to be used in household.
4
SPECIFICATIONS
r Model No.
C D-N A C40
C D -N A C50 ^
Capacity
135 oz. (4.0 liters) 169 oz. (5.0 liters) |
Rating
AC 120 V 60 Hz
Electric Consumption
800 W
Average Power
Consumption
during Keep
Warm
208°F (98°C)
Approx. 36 W Approx. 39 W
195°F (90°C)
Approx. 31 W Approx. 34 W
175°F(80°C)
Approx. 25 W Approx. 27 W
160°F (70°C)
Approx. 22 W Approx. 24 W
1 Length of the Power Cord
2' 11" [0.9 m)
External
Dim ensions
(approx. inches) 9-^(W )x12-M (D)x11-%(H)
9-^(W )x12-M (D) x 1 3 - (H)
(approx. cm)
23 (W) x 31.5 (D) x 30 (H) 23 (W) x 31.5 (D) x 34 (H)
^Weight (including tl
lie Power Cord) Approx. 7 lbs. (3.2 kg) Approx. 8 lbs. (3.4 kg) j
•T h e average Keep Warm electric power consumption is for one hour, provided that the Inner
Container is full and the room temperature is approximately 73°F (23°C).
•T h e height refers to the product when the handle is down.
• In high altitudes or severely cold areas, the product may not perform as specified. Avoid using the
product in such areas or in other extreme conditions.
•T h is product is not suitable for use in countries or regions with different power supply voltages or
frequencies.
5
PARTS NAMES AND FUNCTIONS
s--------------------------------------------------\
Lid Lock
The light sound you may hear
when opening and closing the
Upper Lid is normal, (see pg.19)
Steam Vent
•
Exercise care during the
boiling process as steam
emitting from the Steam
Vent is very hot.
Inne
r Lid
__
Inner Lid Gasket
(Consumable Part)
•if the Inner Lid Gasket hardens, changes shape,
turns white, or otherwise becomes worn out, please
replace it with a new one. (Separate charge
required.) (see pg-16)
Not doing so may cause hot water to leak when the
product is tilted or tipped over, resulting in scalding.
Steam leaking from the gap may also cause burns
or product failures.
C ont
rol Panel
•Do not let the Power Cord
wrap around the Main
Body when turning.
Swivel Base
Inne
r Container
(Nonstick Coated)
Hinge
Handle
Spout
Hot water dispenses from here.
W ate
r Level Gauge
REFILL Line
•Fill water above the line.
W at
er Level Lines
•Use as a guide when
adding water.
Receptacle
Appl
iance Plug inserts here.
W ater Removal Area
•Drain water here.
Maximum Water Level
F
•For care and use instructions,
seepg.16.
ilter
_______________
____
•Please remove the twist tie holding the Power Cord before use.
•Do not use the Power Cord bundled up. Doing so may cause
the Power Cord to become excessively hot, resulting in
malfunction.
Appliance Plug
Tw is
t Tie
Cord
______________
________
_______
6
PARTS NAMES AND FUNCTIONS (cont.)
_ ^ ^ - _ _ .
C I J N T H l_ J I P £ \ N F I
«Press buttons down firmly.
©The Notification Sounds and raised dot ( •) in the center of the
DISPENSE button is provided for those with visual impairment.
DISPENSE button
Press to dispense hot water, (see pg-10,15)
REBOIL/QUICK TEMP button
Starts the Reboil mode, (see pg-11)
Sets the Quick Temp mode, (see pg.14)
Also used when performing the Citric Acid
Cleaning (to initiate cleaning, press this
button for more than 3 seconds), (see pg-17)
UNLOCK button
BOIL lig h t
KEEP WARM light'
TEMP SET button
Sets the Keep Warm temperature,
(see pg.12)
Press once to unlock, (see pg.10)
Press twice to activate Cafe Drip Dispensing
mode, (see pg.15)
Hold for at least 3 seconds to change the
Notification Sound, (see pg.15)
UNLOCK lig h t
DISPENSE
Display
208
[195)
175
< 3 0 0 •[
< u u u ^
160
_
___
_____
,
LCD display shows the water temperature
and Timer settings.
ENERGY-SAVING TIMER
button
Use when setting the
Energy-Saving Timer function,
(see pg.14)
NOTE: Illustration is for reference only. Actual display
will not show all functions simultaneously during use.
How to Open/Close the Upper Lid
To Open o Press the indented area of the
Lid Lock with your thumb.
0 Pull the Lid Lock up with your
fingers to open the Upper Lid.
To Close
Depress the Upper Lid until it
clicks shut.
Indented Area of
the Lid Lock _
How to Deta
ch/Attach the Upper Lid
To Detach Q Open the Upper Lid to about
a 45-degree angle.
@ Push the Upper Lid Detach
button.
Q Pull the Upper Lid forward
and up at an angle.
To Attach Push the Upper Lid back into
place at the same angle.
BOIL MODE
■ Inner Container with wa
ter using
a pitcher or other conta
ner.
To monitor the amount of
water you are filling, look at
the thickness of the stripes on
the Water Level Gauge.
When the Inner
▼ Container is empty.
------Water
Level I 0
%
_L7 V I
The stripes on the
Water Level Gauge
appear thicker when
water is added.
^
•D o not fi
ll the Inner
Container directly
from a water faucet
or place the product
on a wet surface
such as a sink.
(Exposing the
heating element
directly to water
may cause
malfunction.)
•Avoid splashing
water on the Body or
Control Panel. (May
cause malfunction.)
2 Close the Upper Lid and connect the Power Cord.
Lid Lock
Turns on
Close th
e Upper Lid securely.
To ensure safe operation while
boiling and to prevent scalds if
the product is overturned.
If the Lid Lock is sticking up,
it is not closed completely.
Be sure to insert the
Powe
r Cord securely
Otherwise, may cause
electric shock, short
circuit, smoke or fire.
4 T f» !7 V
•D o not al
low the end of the
Appliance Plug to get soiled with
dust or come into contact with
metal objects such as pins.
It automatically starts the boiling
process.
The BOIL light turns on and the Display
shows the water temperature.
Below 170°F: Display shows the water
temperature in 10°F increments.
Above 175°F: Display shows T175J -*■ H80J
- H85J - T190J - T195J - T200J - T205J - T212J.
HHow to set the Quick Temp mode:
(see pg.14)
8
■ T e m p e ra :ure
C o n v e rs o n G u id e
Fahrenheit f F) Celsius (°C)
212
100
208 98
195 90
175 80
160 70
73 23
•D o not fill over the Maximum Water
Level Line. (Hot water may overflow
from the Steam Vent.)
•D o not fill the Inner Container with hot
water. (The Automatic Shut-Off function
may be activated.) (seepg.11)
•D o not fill the Inner Container with any
liquid other than water.
•D o not use water additives such as
charcoal for water purification or
mineral additives. (Small particles may
get clogged inside of the product.)
• If you wish to shorten the completion
time, add less water to the Inner
Container.
The first time
you use the product you
may notice the smell of
c. This is normal
rill gradually
• A t your initial use or when
using the product after a long
period of storage:
Fill the Inner Container with water to the Maximum Water
Level Line ( ), and boil water as directed. Once it
reaches a boil, press the UNLOCK button, then press the
DISPENSE button to dispense about 34 oz. (1 liter) of hot
water in order to rinse the water route, and dispose the
remaining water. Fill with fresh water.
(Always remember to attach the Filter.)
•When using mineral or alkaline ionized water:
When mineral or alkaline ionized water is used, a floating
residue may develop or a milky white substance may form
on the surface of the Inner Container. This is due to the
ingredients in the water and is harmless to your health.
Frequent cleaning is recommended.
How to change the Notification Sound
from a melody to a beep, (see pg.15)
I
When boiling has completed, a melody
sounds and it automatically switches
to 195°F Keep Warm mode.
The BOIL light turns off, the KEEP WARM light
turns on and "212" appears on the Display.
How to set the Keep Warm mode:
208°F Keep Warm Mode, (see pg.12)
175°F Keep Warm Mode, (see pg.12)
160°F Keep Warm Mode, (see pg.13)
Turns off
QUICK,;..
1E » P *
REBOIL
QUICK TEMP
.TEMP
SET
Turns on
208
175
. 3 O
<C iC
160
208
m
175
</SS
160
Time required to boil water:
CD-NAC40 Approx. 35 minutes
8Ś
CD-NAC50
Approx. 42 minutes*
(At a room temperature of 73°F with the
Inner Container filled to the Maximum
Water Level Line with water temperature
at 73°F.)
& Includes approx. 4 minutes to
Dechlorinate.
Length of time until the water
temperature reaches about 195°F:
CD-NAC40 Approx. 45 minutes
CD-NAC50
Approx. 45 minutes
(At a room temperature of 73°F with the
Inner Container filled to the Maximum
Water Level Line.)
•The length of time for the water
temperature to reach 195°F will vary
depending on the temperature of the
room and water.
•Add water when the water level is
low during the Keep Warm mode.
(The product automatically begins
heating the water.) If the water level
is still not high enough, it will not
automatically switch to Boil. In this
case, press the REBOIL/QUICK
TEMP button to manually start the
process, (seepg.11)
•Please follow the instructions below
to prevent the risk of scalding:
• Do not cover the Steam Vent with a
cloth.
■ Do not touch the Steam Vent or
bring your hands or face near the
Steam Vent.
■ Do not open the Upper Lid while
the BOIL light is on.
■ Do not dispense hot water while it
is boiling.
9
DISPENSE HOT WATER
The UNLOCK light turns on and
hot water can be dispensed.
r 4 m --------------------
•D o not unlock and press the
DISPENSE button if the Inner
Container is empty.
2
Press the
DISPENSE
button to dispense hot water.
Do not swivel the product while dispensing water.
•Initially upon boiling or if it has been a while after dispensing, the
water may not be very hot. Please discard the first cup (of the hot
w
ater).
•D o not attempt to dispense hot water while boiling.
•Water may not dispense smoothly shortly after boiling. Wait for a
short period of time before dispensing hot water again.
•B e careful as the Body heats up during the Boil and Keep Warm
modes.
DISPOSE WATER
Dispose leftover water when the product is not in use.
and detach the Upper Lid.
When detaching the Upper Lid:
•Take precaution with the steam.
You may scald yourself.
_______
Hold the product with both hands and dispose water where indicated
"EMPTY FROM HERE" on the wall of the Inner Container.
Hold the Handle securely.
When disposing hot water:
•Take precaution with the
hot water and steam.
You may scald yourself.
•Take precaution as hot
water may drip from the
Spout, causing scalds.
10
DISPENSE HOT WATER (cont.)
1
0
seconds after dispensing,
the UNLOCK light turns off
and the Automatic Dispense
Lock is activated.
Automatic Dispense Lock
A safety function to prevent hot water
from dispensing if the DISPENSE
button is accidentally pressed.
•Even if no water is dispensed, the
Automatic Dispense Lock will be
activated after about 10 seconds.
Do not tilt or shake the
product after dispensing. Hot
water may drip from the Spout,
causing scalds.
r
Reboil mode
This function is used when reboiling
water in the Keep Warm mode.
_
\
Press the (° S | button.
T
h
e BOIL light turns on when
the boiling process begins.
Time required to
finish reboiling
(At a room temperature of
73°F / 23°C with the Inner
Container filled to the
Maximum Water Level Line.)
208°F Keep Warm Mode
Approx. 4-6 minutes
195°F Keep Warm Mode
Approx. 7-9 minutes
When the Reboil process is completed,
a melody sounds and the product
switches to Keep Warm mode.
•Pressing the REBOIL/QUICK TEMP button twice activates the
Quick Temp mode, (see pg.14)
•D o not attempt to dispense hot water while reboiling.
•W ater may not dispense smoothly shortly after boiling. Wait for
a short period of time before dispensing hot water again.
•M
a
ke sure the water level is above the REFILL Line
before pressing the REBOIL/QUICK TEMP button.
•D
o
not plug or unplug the
Power Plug or Appliance Plug
with wet hands. (Doing so
may cause short circuit or
electric shock.)
•D o not dispose hot water with
the Upper Lid in place. (The
Upper Lid may come off,
spilling hot water and causing
scalds.)
•D o not allow water to splash
on the Control Panel, Hinge,
Handle or Receptacle. (Could
cause scalding or
breakdown.)
•Take precaution as not
attaching the Filter properly
may cause it to fall out when
dispensing hot water.
•Dispose the water at least
once a day. (Leaving water in
the Inner Container can
cause unwanted odor or scale
build-up.)
r
Automatic Shut-Off function
2
0
8
a
n
HH
175
160
•B
e
careful not to
repeat the boiling
process without filling
the Inner Container
with water, as the
Nonstick Coating may
discolor and peel.
The Automatic Shut-Off function activates to shut down power to the
heater in order to prevent damage from overheating. The Display will
show "HH" and beeps will sound to alert you that the Automatic Shut-Off
has been activated. The following conditions may cause activation:
•When plugged in without filling the Inner Container with water.
•When the water level is lower than the REFILL Line and boiling
has been attempted.
•When the Inner Container is empty or the Upper Lid is left open for
adding water.
•When pouring in hot water immediately after plugging in the unit.
V.
U
n
plug the product. Allow the Inner Container
to cool. Fill the Inner Container with water and
plug back in.
1 1
HOW TO SET THE KEEP WARM MODE
Press the
.TEMP
SET
button to
change the settings.
Each press of the button changes the position
of the" i " on the Display.
•Once the temperature is set, it is stored in memory
even when the product is unplugged.
For making coffee, tea and instant noodles v
208°F Keep Warm Mode
208°F is ideal for making coffee, tea and
instant noodles.
Select the "208" on the Display.
Turns off
QUICK v
I M P *
REBOIL
QUICK IM P
Turns on
TEMP
SET
208
am
175
< 3 O
C fC
160
When the boiling process has completed,
a melody sounds, the BOIL light turns off
and the KEEP WARM light turns on.
i
When the water
temperature reaches
208°F, "208" appears on
the Display.
•Depending on the altitude where the product
is used, the Keep Warm mode may be set at
205°F-207°F, in order to prevent continuous
boiling.
For making Japanese (green) tea ^
175°F Keep Warm Mode
175°F is ideal for making Japanese
(green) tea.
Select the "175" on the Display.
Turns off
QUICK *
TEMP *
REBOIL
QUICK T9IP
'TEMP
' SET
208
m
175
D O
ĄC tC
160
Turns on
208
175
/ I S
160
When the boiling process has completed, a
melody sounds, the BOIL light turns off, and
the KEEP WARM light begins to blink.
If initiated during Keep Warm mode, the light \
will blink 2 seconds after the selection. /
When the water
temperature reaches
about 175°F, "175"
appears on the Display,
and the KEEP WARM
light stops blinking and
remains on.
When water is boiled in the Quick Temp mode,
the KEEP WARM light does not blink but turns
on. (see pg-14)
ILength of time for the water temperature to
reach 175°F after boiling:
CD-NAC40
Approx. 2 hours and 20 minutes
CD-NAC50 Approx. 2 hours and 20 minutes
(At a room temperature of 73° F with the Inner Container
filled to the Maximum Water Level Line.)
•The length of time for the water temperature
to reach 175°F will vary depending on the
room temperature and amount of water.
12
HOW TO SET THE KEEP WARM MODE (cont.)
Short beep)
s You will hear 2 short beeps when 195°F
Keep Warm mode is selected.
•You can change the temperature setting during
the Keep Warm mode.
(It may start reboiling depending on the water
temperature and the selected setting.)
•You cannot select the 208°F Keep Warm mode
while the Quick Temp mode is selected.
For preparing baby formula
160°F Keep Warm Mode
160°F is ideal for preparing baby formula.
Select the "160" on the Display.
When the boiling
process has
completed, a melody
sounds, the BOIL
light turns off, and
the KEEP WARM
light begins to blink.
/ If initiated during \
Keep Warm mode,
the light will blink 2
seconds after the
selection. I
When the water
temperature reaches
about 160°F, "IGO''
appears on the Display
and the KEEP WARM
light stops blinking and
remains on.
• If you wish to shorten
the time, add less water
to the Inner Container.
>
/
Fill water up to 1.0
on the Water Level
Gauge.
Turns on
208
te n
B5S
•D u
l/b
160
ILength of time for the water temperature to
reach 160°F after boiling:
.....................
1.0 L
M
ax Capacity
CD-N
AC40
Approx. 1 hour
and 20 minutes
Approx. 4 hours
CD-NA C50
Approx. 1 hour
and 20 minutes
Approx. 4 hours
(At a room temperature of 73”F.)
•T he length of time for the water temperature
to reach 160°F will vary depending on the
room temperature and amount of water.
When preparing baby formula:
160 F is ideal for preparing formula. Dissolve the
formula and let cool to optimum temperature
(slightly higher than body temperature). If fed
without cooling, babies are at risk of scalding.
• Be sure to check that the KEEP WARM light is on
and NOT blinking before dispensing.
• Do not use the Quick Temp mode, (see pg.14)
■Tem perature
Conversion Guide
Fahrenheit (°F)
Celsius (°C)
212
100
208 98
207 97
205
96
195 90
17
5 80
160 70
73 23
13
s
QUICK TEMP MODE
This function heats the water to the selected Keep Warm temperature without reaching a boil. The water will reach the
selected Keep Warm temperature quicker than the regular Boil mode. Other benefits include reduced steam and
reduced energy use. Use this mode when dechlorination is not necessary, such as when using bottled or purified water.
While the water is heating,
press the [qS ] button to
select the Quick Temp mode.
You cannot activate Quick Temp mode while
the product is set at 208°F Keep Warm mode.
Each press o f the REBOIL/QUICK
TEMP button changes the b oil
mode.
Regular Boil mode (Default)
Quick Temp mode
Holding the REBOIL/QUICK TEMP button for
more than 3 seconds activates Citric Acid
Cleaning mode, (see pg. 17)
After reaching the
selected temperature, it
will automatically switch
to Keep Warm.
A melody sounds, the Boil light turns off
and the KEEP WARM light turns on.
160°F Keep Warm mode:
•Once the water temperature
reaches about 175°F (80°C), it will
switch to Keep Warm at 160°F
(70°C). Length of time for the
water temperature to reach 160°F
after heating up is approx. 30
minutes. (At a room temperature
of 73°F / 23°C with the Inner
Container filled to the Maximum
Water Level Line.)
•After the KEEP WARM light stops
blinking, it will switch to Keep
Warm mode.
•You cannot select 208°F Keep Warm mode while Quick Temp mode is
activated.
•There may be a lingering chlorine smell if tap water is used while Quick Temp
mode is activated. If this is an issue, use the regular Boil mode instead.
•Depending on the room temperature and amount of water the actual water
temperature after heating may differ from that shown on the Display.
•Depending on the temperature of the room and water, and atmospheric
pressure, some steam may be produced.
•The Quick Temp mode may be canceled if the Power Cord is detached. Set to
the desired mode again.
•The product begins the Regular Boil mode when water is added. Activate the
QUICK TEMP mode again.
■ T
*Water does not reach a boil under Quick Temp mode, and should not be used to prepare baby formula.
•A lthough the water will not reach a boil when Quick Temp mode is activateid, the Steam Vent will
become hot. Please do not touch it.
ENERGY-SAVING TIMER FUNCTION
The Boiling function will complete after the set time. (The Energy-Saving Timer function helps save energy
by shutting off electricity to the heater until boiling begins.)
-N
Press the timer button until the desired length of time is displayed
Each press o f the TIMER button changes the set time.
(H for hours)
( 6 H
T
IQ H j
Cancel (temperature display)
1 i!£
< 81
Í
160
I %
• I f the product is idle for about 2 seconds, the time
currently displayed w ill be applied.
•To cancel the Timer, press the TIMER button several
times until the temperature appears on the Display, or
press the REBOIL/QUICK TEMP button once.
•When using the Quick Temp mode with the
Energy-Saving Timer function, set the Energy-Saving
Timer function after selecting the Quick Temp mode.
•If the Power Cord is detached, the Energy-Saving
Timer function will be canceled and must be reset.
You will hea
r 2 short beeps when 6H is selected. |
i m elody sounds and the Energy-Saving
Tim er fu nction is activated.
The
B oiling fu nctio n w ill com plete at the
set tim e.
A melody sounds, the BOIL light turns off and the product
switches to Keep Warm mode, (see pg.9,12,13)
Boiling may stop earlier than the set time, depending on room
temperature, water temperature and amount of water.
14
CAFE DRIP DISPENSING MODE
This mode decreases the amount of water dispensed to 60% of the normal setting, making it suitable for
brewing café drip coffee.
1
Press the
button twice.
When the UNLOCK and
CAFÉ DRIP lights turn
on, the Café Drip
Dispensing mode is
activated.
•Pressing the UNLOCK button again during Café Drip
Dispensing mode will reset the product to the normal
dispensing mode.
•When the UNLOCK and CAFÉ DRIP lights turn off,
the Automatic Dispense Lock is activated.
•If the water level is low, it may take longer for water to
begin dispensing after pressing the DISPENSE
button, or water may not dispense smoothly.
•Water may not dispense smoothly just after boiling
has completed. In this case, wait for a short period of
time before dispensing hot water again.
2
Press the
DISPENSE
button to dispense
hot water.
You can use the Café
Drip Dispensing mode for
about 60 seconds while
the UNLOCK and CAFÉ
DRIP lights are on.
•Be careful not to burn yourself.
•If using a cone filter placed directly on a cup, be
careful not to let it fall inside the cup while brewing.
•The first cup of water may not be hot enough just after
boiling has completed, or when you have not
dispensed water for a while. Discard a cup of hot
water before brewing.
•If the cup or other container that you use is cold, the
hot water may cool quickly. To prevent this, warm the
container before use.
>
HOW TO CHANGE THE NOTIFICATION SOUND
•N o tific a tio n Sound:
The product informs you with a melody or beeps that it has finished
boiling or the timer has been set.
When and what types of Notification Sounds are heard:
When
Jypes of Notification
Sound
(D e fa u lt)
Beeping
Boiling stops
Minuet 5 long beeps
X
Timer is set
Beautiful Dreamer
X X
How to change the Notification Sound:
1
Hold the lUHL0CI(o| button for more than 3 seconds during the boiling process or
Keep Warm mode.
Each time the UNLOCK button is held for more than 3 seconds, the Notification Sound will change.
© Melody:
“Beautiful Dreamer" will play
when setup is complete.
\
*
(D Beeping:
It will beep 3 times when setup
is complete.
*
(D Mute:
It will beep once when setup is
complete.
)
2
Setup is complete when the desired sound (melody or beep) is heard.
•The selected Notification Sound is stored even if the product is unplugged.
Always unplug the Power Cord,
dispose all water, and allow to cool
completely before cleaning.
j ICTJa
*Do not attempt to dry the product by turning it upside down when the bottom is wet. (Water may get inside
the body and cause it to break or rust.)
•Do not use the following:
■ Thinner and bleach. (Doing so may cause discoloration, crack, degradation and corrosion.)
■ Polishing powder, nylon brushes, anything made with metal, eraser pads, hard nylon sponges and abrasive cleaners. (Doing so may
cause corrosion.)
■ Detergent. (Hot water may spill out, resulting in scalds or damage. Doing so may cause unwanted odor.)
•Do not use scrub brushes for any portions other than the Filter. (Doing so may cause corrosion.)
•When using chemically treated cloths, do not rub too hard or leave them on the product for a long time as the surfaces of the product
may be damaged by chemical reactions.
•Do not use a dishwasher or dish dryer for cleaning or drying. (Doing so may cause the plastic parts to deform.)
•Before storing the product for a longer period of time, dry it completely and pack in a plastic bag to prevent odors from being absorbed.
^ •Never wash the Body, Upper Lid, or Power Cord with water. ____________________________________________________
Inner Lid
Wipe with a soft wet sponge.
Inner Container
Perform the Citric Acid Cleaning
(see pg.17) periodically.
Body/Upper Lid
Wipe clean with a
damp well-wrung cloth.
•D o not get water on or wash the Control
Panel or Water Level Gauge. (If water gets
inside, it may cause malfunction or rust.)
Especially when...
•Red rust spots (Rust Stain) is visible on the Inner Container.
•Milky white or gray discoloration and/or filmy objects
are found in the water.
•Boiling is louder than usual.
•H ot water has an odor.
(The condition of the Inner Container will vary depending on
the water quality and frequency of use.)
r
Filter
Remove the Filter from the Inner
Container and wash with a soft brush.
^
Pull the Filter up to release, and press
down firmly to attach.
If you find it difficult to clean the Filter, replace
it with a new one. (see pg.17)
* «SaP
T V ~ lf
CSfe
•Never use the product without installing the Filter.
(The Filter prevents foreign objects from entering the water
route or Electric Pump and obstructing the flow of hot water.)
,
Wipe clean with a dry cloth. ^
HOW TO REPLACE THE INNER LID GASKET
The Inner Lid Gasket may need to be replaced due to time and
wear. We recommend that you replace it about once a year.
Wipe new Inner Lid Gaskets with a wet soft sponge before attaching to the Inner Lid.
To remove the Inner Lid Gasket
©Remove the four screws, and remove the Inner Lid.
•B e careful not to lose these screws.
©Remove the Inner Lid Gasket which is installed on the
Inner Lid.
A fte r rem oving the Inner Lid, check the plastic part of
the Upper Lid fo r abnorm alities.
-Hf this part is discolored or if it feels rough to the touch,
replace it (there will be a fee for this).
When the Inner Lid Gasket
hardens, changes shape,
turns white, or otherwise
becomes worn out.
Please purchase
and replace with
a new one.
Hole on the Screws (x4)
Inner Lid I
To attach the Inner Lid Gasket
© F it the Inner Lid Gasket securely to the outer
circumference as shown in the figure.
© Line up the pin on the Upper Lid w ith the hole on the
Inner Lid, and tighten the four screws securely.
If the Inner Lid Gasket hardens, changes shape, turns white, or otherwise
becomes worn out, hot water may leak from the gap between the Upper Lid
and Body when tilted. Steam may also leak from the gap, causing burns
and product failures, which may result in scalds. If hot water spews from
the gap or there is steam even after replacing the Inner Lid Gasket, other
parts may be in need of repair. Please contact Zojirushi Customer Service.
16
Perform every 1-3 month(s) of usage
HOW TO PERFORM CITRIC ACID CLEANING
Do not drink
the water used
In order to prevent gas bubbles and bubbllng-over, the Citric Acid Cleaner for
Electric Water Boilers (CD-K03E-JU) is recommended for cleaning. To purchase
this cleaner, please visit an authorized Zojirushi dealer or
www.zojirushi.com.
Preparation:
Check that the Filter is attached
to the Inner Container.
I ®
- V V
c '5
----
•I f the Filter is dirty, remove it from the
Inner Container, wash with a soft brush
and reinstall.
• 4
I
Put 1 package of the Citric Acid Cleaner
CD-K03E-JU in a cup and add warm water to
dissolve. Pour it into the Inner Container and
fill with water to the Maximum Water Level Line.
-------------------------\
•Do not fill over the Maximum Water Level Line.
(Hot water may spill out, resulting in scalds.)
Close the Upper Lid, insert the Power Plug and press the
, REBOIL
button for
more than 3 seconds.
Beeps when the cleaning process begins. Beeps when the cleaning process is completed.
(Short beep
QUICK ^
IM P j l
^ REBOIL
(5 ^ngbw p s)
QUKKTHflP
Cleaning time:
Approx. 1.5 hours.
^
^Cleaning times may vary
depending on the amount
of water, water
temperature and room
temperature.
Unplug the Power Plug, detach the
Upper Lid and dispose water where
indicated "EMPTY FROM HERE."
(Please take precautions not to splash water
on the Hinge.)
When disposing hot water:
•Take precaution with the hot water and
steam. You may scald yourself.
•Take precaution as hot water may drip
from the Spout, causing scalds.
4
To rinse, fill the Inner Container with
water. Boil and dispense about a cup of
hot water to rinse out the Spout, allow to
cool, then dispose the remaining water.
To cancel the Citric Acid Cleaning at any time,
unplug the Power Plug for more than 5 seconds.
r
•Repeated citric acid cleaning may be
necessary for hard-to-remove residues or
if water does not dispense smoothly.
• I f mineral or alkaline ionized water is
used, calcium tends to build up on the
surface of the Inner Container. If scale
accumulates on the Inner Container or the
Filter, boiling may become louder than
usual and water may not dispense
smoothly. Frequent cleaning is
recommended when using mineral or
alkaline ionized water.
REPLACEMENT PARTS
•Replacement parts may be available for an additional
charge. Please replace damaged parts only with new parts.
•When replacing parts, please record the model number and
part name beforehand. Parts can be purchased through
Zojirushi.com, by contacting Zojirushi Customer Service, or
the store where you purchased the product.
Zojirushi Cust
omer Service
1-800-733-6270 www.zojirushi.com
Parts Names Parts Number
Inner Lid Gasket
BF426007M-00
Filter
627402-00
Citric Acid Cleaner for
Electric Water Boilers
(1 oz. / 30 g X 4 packets)
CD-K03E-JU
Q&A ON PRODUCT USE
Is it okay to use the product for
heating liquids other than water?
^
^
Do not fill the product with any liquid other than water. It may cause
malfunction, or may overflow and cause scalding.
► pg-3
Does the water need to be
changed every day?
^
W
To prevent odor and scale build-up, please change the water at least once
a day.
y pg-10
Is it okay to use mineral water
or alkaline ionized water?
^
r
Yes. However, when mineral or alkaline ionized water is used, a floating
residue may develop or milky white substance may form on the surface of
the Inner Container. This is due to the ingredients in the water and is
harmless to your health. Frequent cleaning is recommended.
^pg -9
pg.17 r
1 accidentally drank water while
performing the Citric Acid Cleaning.
Is this harmful to my health?
^
Please follow the instructions shown on the package of the citric acid
cleaner CD-K03E-JU.
Is it okay to leave the product
unattended while it is turned on?
^
W
It is safe to use the product unattended as it has an Automatic Shut-Off function
(power to the heater will be automatically turned off), which will be activated once it
is empty of water. However be careful not to repeat the boiling process without filling
the Inner Container with water, as the Nonstick Coating may discolor and peel.
^ pg-11
TROUBLESHOOTING GUIDE points before calling for slrvii
[ C ondition J
^ Cause
( Remedy ")
Water does not heat up.
^ Power Plug is not connected to an electrical outlet.
^ ( Connect the Power Plug. )
Water does not boil.
r i
The Quick Temp mode is selected.
(Water does not reach a boil under Quick
Temp mode.)
w >
►
r
Press the REBOIL/QUICK TEMP button,
select the regular Boil mode, (see pg.14)
V J
Hot water has a
disagreeable odor.
Scale or other residue has accumulated
on the Inner Container.
►
c
Perform citric acid cleaning.
(see pg.17)
You have not performed citric acid
cleaning regularly.
►
V J
•A mild plastic odor may be
noticeable with a new product.
This odor will gradually fade
away.
The product has not been used for a long
time.
►
” Boil water, press the UNLOCK button, and
then dispense about 34 oz. (1 liter) of hot
water. Discard the remainder, (see pg.9)
'
• You may smell chlorine (used
for sterilization of tap water)
after boiling.
Tap water is used under Quick Temp mode.
►
If this is an issue, use the regular Boil
mode instead, (see pg.14)
The regular Boil mode purges chlorine in
tap water by boiling completion. v
Water leaks from the Spout or
spills out from the Steam Vent.
Check that the Inner Container is not filled
over the Maximum Water Level Line.
C A
Pour out the excess water until it is below
the Maximum Water Level Line.
V J
Steam emits while heating water
using the QUICK TEMP mode.
• The QUICK TEMP mode does not heat water until it boils. However, some steam may
be produced depending on the temperature of the room and water, and the atmospheric
pressure.
The Quick Temp mode cannot
be selected.
r ^
Is the 208°F Keep Warm mode selected?
hi d
►
Select the 195,175 or 160°F Keep
Warm mode, then select the Quick Temp
mode, (see pg.14)
The 208°F Keep Warm mode
cannot be selected during the
Quick Temp mode.
You cannot select the 208°F Keep Warm
mode during the Quick Temp mode.
►
r '\
Use the Quick Temp mode for other than
208°F Keep Warm mode, (see pg.14)
V J
There is no Notification Sound
(no sound when pressing
buttons).
r ^
Did you mute the sound?
►
f \
Adjust the Notification Sound setting.
(seepg.15)
Water does not dispense or
does not pour properly.
Hot water does not pour properly a few
minutes after boiling.
►
Bubbles form from the bottom of the Inner'
Container while water is being heated.
Wait for a short period of time before
dispensing hot water again. v
Scale or other residue has accumulated
on the Inner Container and Filter.
r "\
Clean the Inner Container and Filter.
(seepg.16)
v J
The Automatic Dispense Lock is
activated.
Press the UNLOCK button, then press the
DISPENSE button, (see pg.10)
IA
V J
18
[ C ondition ]
[ Cause ]
i
Remedy
Water does not dispense or
does not pour properly.
k Power Plug is not connected to an electrical outlet. J
("Connect the Power Plug.
Scale may build up in the water route or Electric
Pump and prevent water from dispensing smoothly.
Perform citric acid cleaning,
(see pg.17)
Scale
Over time and use, calcium
and other minerals
contained in water build up
on the surface of the Inner
Container and the Filter. It is
called "scale" and is
harmless to your health.
A filmy, floating residue is
noticeable. (Could the Nonstick
Coating be peeling off?)
r i
Residue is due to the mineral content in
water, not from corrosion of the Inner
Container or peeling of the Nonstick Coating.
Milky white and rough-surfaced
objects have built up on the
surface of the Inner Container.
r 1
Excessive accumulation of scale and
other build-up on the surface of the Inner
Container can cause boiling to become
louder.
Boiling is louder than usual.
Red rust-like spotting appears
on the surface of the Inner
Container.
Caused by iron in the water, not
deterioration of the Inner Container.
A white floating residue is
noticeable.
Remove the Inner Lid and check the
plastic part of the Upper Lid for
abnormalities,
(see pg-16)
If this part is discolored or if it feels rough
to the touch, replace it (must purchase
separately).
Water is not hot.
Initially upon boiling or if it has been a
while after dispensing, the water may not
be very hot due to water remaining in the
Water Level Gauge.
Please discard the first cup (of the hot
water).
Is the Timer set?
Press the REBOIL/QUICK TEMP button,
(see pg.14)
The Body becomes hot.
• When the water temperature and/or room temperature is high, the outer surface of the
Body may reach up to 140’F (60°C). This is not a malfunction.
The Power Cord becomes hot.
•T h e Power Cord may become hot while the water is boiling. This is not a malfunction.
You hear a light sound when
opening and closing the
Upper Lid.
• This sound is normal and comes from the movement of the weight which prevents hot
water from flowing out when the product is overturned.
Humidity builds in the Display
window or the Water Level
Gauge.
• If water is filled from a faucet or the product is placed directly on a sink and the bottom
becomes wet, water may go inside of the Body and the Display may show moisture.
This may cause short circuit or electric shock. Unplug the Power Cord and contact
Zojirushi Customer Service.
2
lights turn on
and "HH" appears
on the Display.
m
u
* .REBOIL
" I T
.TEMP
’ SET
HH
T
he
Inner Container is low
on water or hot water was
added to the Inner
Container, causing the
Automatic Shut-Off
function to engage.
Unplug the Power Plug and
wait until the Inner Container
cools down. Add water and plug
in the Power Cord, (see pg.11)
2 lights blink at
the same time and
the Display shows
a rotating square.
I
I 1 /tE M P 1
208
W3
r r ?
irJ
175
160
T
he
In
ner Container is in
a citric acid cleaning
cycle.
To cancel the citric acid
cleaning cycle, unplug the
Power Plug and wait more than
5 seconds before plugging back
in. (see pg.17)
Í
B
>
£ 3 or £*/ is displayed.
I
n
dic
ates malfunction.
Please contact Zojirushi
Customer Service.
In
n
er
Lid Gasket
►The Inner Lid Gasket is replaceable, and we recommend that you replace it about once a
year. If steam leaks from the gap between the Upper Lid and the Body, or if the Inner Lid
Gasket hardens, changes shape, turns white, or otherwise becomes worn out, please
replace it. (see pg.16)
Plastic Parts
► The plastic part of the Upper Lid may deteriorate over use. When replacing the Inner Lid
Gasket, check the plastic part. If discoloration occurs or the surface becomes coarse,
replace the Upper Lid (must purchase separately). (We take care in only using materials
for the plastic parts that are safe and hygienic for food contact.)
The N onstick Coating of the Inner C ontainer may become damaged w ith use. Contact or call Z ojirushi
Customer Service to discuss available options we may have fo r you: 1-800-733-6270
19
