Important Safety Instructions
Product Overview
Installation of steam floor washer
Ready to Use
Product Parameters
Common Troubleshooting
Answers to Frequently asked Questions
-----------------------------01
---------------------------------------------03
------------------------04
-----------------------------------------------------08
-------------------------------------------09
---------------------------------10
--------------11
Only suitable for home use · please read all instructions before using this steam floor washer.
When using the steam floor washer, the basic safety precautions should always be followed,
including:Read all instructions carefully before using the steam floor washer.
warning
To reduce fire, electric shock or personal injury:
After the steam floor washer is powered on, be sure to take care of it. When the floor washer is
not in use and before maintenance, the power cord must be pulled of the power socket.
Do not use damaged power cord or power plug. If the steam floor washer fails to work
normally or falls, damages, stays outdoors for a long time or is soaked in water, please return
the product to the manufacturer for after-sales inspection and maintenance. When using the
steam floor washer, improper reassembly or maintenance may cause electric shock or personal
injury.
To prevent electric shock, do not immerse the steam floor washer in water or any other liquid.
Do not touch the power plug or the steam floor washer with wet hands, or operate the steam
floor washer with bare feet.
Do not use the power cord to pull the floor washer, use the power cord as a handle, clamp the
power cord in the door crack or pull the power cord along the sharp edge or corner. Do not roll
the steam floor washer over the power line. Make sure that the power cord is away from the
heating surface.
Do not pull out the power plug by pulling the power cord. To unplug the power plug, grasp the
power plug instead of pulling the power cord. Do not use extension wires or sockets with
insufficient current carrying capacity.
Please unplug before maintenance.
Be sure to unplug the power plug when the steam floor washer is not in use.
When the power cord of the steam floor washer is not pulled out of the power socket, do not
add water to the water tank or install the mop head of the floor washer. Pull out the power
plug from the socket, wait for the machine cools down, and then add water to the steam floor
washer , or disassemble the mop head of the steam floor washer.
Before cleaning the outside of the steam floor washer, please unplug its power cord from the
power socket, and then clean the floor washer with a dry cloth. Do not spill water on the steam
floor washer, or use alcohol, benzene or paint thinner to clean the steam floor washer.
In order to avoid circuit overload, do not operate other equipment on the socket (circuit) used
by the steam floor washer at the same time.
To avoid scalding, please unplug the power plug of the steam floor washer and let it cool before
removing or replacing the accessories of the floor washer.
Important Safety Instructions
Product Overview
Installation of steam floor washer
Ready to Use
Product Parameters
Common Troubleshooting
Answers to Frequently asked Questions
-----------------------------01
---------------------------------------------03
------------------------04
-----------------------------------------------------08
-------------------------------------------09
---------------------------------10
--------------11
Only suitable for home use · please read all instructions before using this steam floor washer.
When using the steam floor washer, the basic safety precautions should always be followed,
including:Read all instructions carefully before using the steam floor washer.
warning
To reduce fire, electric shock or personal injury:
After the steam floor washer is powered on, be sure to take care of it. When the floor washer is
not in use and before maintenance, the power cord must be pulled of the power socket.
Do not use damaged power cord or power plug. If the steam floor washer fails to work
normally or falls, damages, stays outdoors for a long time or is soaked in water, please return
the product to the manufacturer for after-sales inspection and maintenance. When using the
steam floor washer, improper reassembly or maintenance may cause electric shock or personal
injury.
To prevent electric shock, do not immerse the steam floor washer in water or any other liquid.
Do not touch the power plug or the steam floor washer with wet hands, or operate the steam
floor washer with bare feet.
Do not use the power cord to pull the floor washer, use the power cord as a handle, clamp the
power cord in the door crack or pull the power cord along the sharp edge or corner. Do not roll
the steam floor washer over the power line. Make sure that the power cord is away from the
heating surface.
Do not pull out the power plug by pulling the power cord. To unplug the power plug, grasp the
power plug instead of pulling the power cord. Do not use extension wires or sockets with
insufficient current carrying capacity.
Please unplug before maintenance.
Be sure to unplug the power plug when the steam floor washer is not in use.
When the power cord of the steam floor washer is not pulled out of the power socket, do not
add water to the water tank or install the mop head of the floor washer. Pull out the power
plug from the socket, wait for the machine cools down, and then add water to the steam floor
washer , or disassemble the mop head of the steam floor washer.
Before cleaning the outside of the steam floor washer, please unplug its power cord from the
power socket, and then clean the floor washer with a dry cloth. Do not spill water on the steam
floor washer, or use alcohol, benzene or paint thinner to clean the steam floor washer.
In order to avoid circuit overload, do not operate other equipment on the socket (circuit) used
by the steam floor washer at the same time.
To avoid scalding, please unplug the power plug of the steam floor washer and let it cool before
removing or replacing the accessories of the floor washer.
When using, do not turn over the steam floor washer or spray steam toward people, pets or
plants.
Do not use the product as a heating facility.
Be careful when using near children, pets or plants.
Do not add detergent, perfume, oil or other chemicals to the water used by the steam floor
washer, which may damage the steam floor washer or cause unsafe use. It is recommended to
use purified water as water for the steam floor washer.
Only use accessories recommended by merchants.
Do not put any foreign matter into the steam nozzle. Do not use if the steam nozzle is blocked.
Do not put your hands or feet under the steam floor washer. The steam will make the machine
very hot.
Only use this product on horizontal and flat ground. Do not use on walls, counters or
windows.
Do not use on leather, waxed furniture, synthetic fiber, velvet or other delicate, steam-sensitive
materials.
Do not store or place the steam floor washer in a place for too long without removing the mop
pad, as this may damage the ground.
Before removing the mop pad, pull out the power plug of the machine and let it cool.
Do not use the steam floor washer without a mop pad.
Keep the work area well lit.
Store the steam floor washer indoors in a cool and dry place.
Do not lift the steam floor washer when using it.
The steam ejected by the steam washer is very hot, which may cause burns. Be careful when
using the steam floor washer.
Do not scrub any area for a long time.
Please do not use it on the wood floor without wax sealing or unglazed tile floor. And using a
steam floor washer on the waxed floor or some floors may cause the floor to lose luster. Before
starting cleaning, select an area of the surface to be cleaned for testing. Check the use and
maintenance instructions provided by the floor manufacturer.
Be sure to select a separate area on the surface to be cleaned for testing before starting a
large-scale cleaning operation. At the same time, we also recommend that you check the use
and maintenance instructions provided by the floor manufacturer. the use and maintenance
instructions provided by the floor manufacturer.
Do not use the steam floor washer without a mop pad or without adding water to the water
tank. Under normal circumstances, it takes 30 seconds to generate steam. When the steam
floor washer is used for the first time, the time to generate steam may be longer.
In order to prolong the service life of the steam floor washer, it is recommended to use pure
water.
Please keep the instruction manual properly.
Product Overview
When using, do not turn over the steam floor washer or spray steam toward people, pets or
plants.
Do not use the product as a heating facility.
Be careful when using near children, pets or plants.
Do not add detergent, perfume, oil or other chemicals to the water used by the steam floor
washer, which may damage the steam floor washer or cause unsafe use. It is recommended to
use purified water as water for the steam floor washer.
Only use accessories recommended by merchants.
Do not put any foreign matter into the steam nozzle. Do not use if the steam nozzle is blocked.
Do not put your hands or feet under the steam floor washer. The steam will make the machine
very hot.
Only use this product on horizontal and flat ground. Do not use on walls, counters or
windows.
Do not use on leather, waxed furniture, synthetic fiber, velvet or other delicate, steam-sensitive
materials.
Do not store or place the steam floor washer in a place for too long without removing the mop
pad, as this may damage the ground.
Before removing the mop pad, pull out the power plug of the machine and let it cool.
Do not use the steam floor washer without a mop pad.
Keep the work area well lit.
Store the steam floor washer indoors in a cool and dry place.
Do not lift the steam floor washer when using it.
The steam ejected by the steam washer is very hot, which may cause burns. Be careful when
using the steam floor washer.
Do not scrub any area for a long time.
Please do not use it on the wood floor without wax sealing or unglazed tile floor. And using a
steam floor washer on the waxed floor or some floors may cause the floor to lose luster. Before
starting cleaning, select an area of the surface to be cleaned for testing. Check the use and
maintenance instructions provided by the floor manufacturer.
Be sure to select a separate area on the surface to be cleaned for testing before starting a
large-scale cleaning operation. At the same time, we also recommend that you check the use
and maintenance instructions provided by the floor manufacturer. the use and maintenance
instructions provided by the floor manufacturer.
Do not use the steam floor washer without a mop pad or without adding water to the water
tank. Under normal circumstances, it takes 30 seconds to generate steam. When the steam
floor washer is used for the first time, the time to generate steam may be longer.
In order to prolong the service life of the steam floor washer, it is recommended to use pure
water.
Please keep the instruction manual properly.
Product Overview
Installation of steam floor washer
Installation of steam floor washer
Ready to Use Product Parameters
VM6
120V
50/60Hz
1300W
330mL
110-130 RPM
16-28g/min
Product Model
Rated Voltage
Rated Frequency
Rated Power
Water Tank Capacity
Rotating Speed of Rotary Table
Steam Volume
Ready to Use Product Parameters
VM6
120V
50/60Hz
1300W
330mL
110-130 RPM
16-28g/min
Product Model
Rated Voltage
Rated Frequency
Rated Power
Water Tank Capacity
Rotating Speed of Rotary Table
Steam Volume
