2,400Lm LED
Dual Head Work Light
PARTS IDENTIFICATION
SKU No: 370-5451
MODEL No: Z-2000DT-6
Swivel control knob
Tripod cross bar control knob
Adjustable height tripod
Locking tripod stand
Cord wrap
Cord clip
1
S
K
U
No:
3
7
0
-
5
4
5
MO
DE
L
No
:
Z-2
00
SKU No: 370-5451
MODEL No: Z-2000DT-6
SAFETY INSTRUCTION
CUSTOMER SERVICE
CAUTION
1. While ON, avoid touching the product’s surface(s) during adjustments or in normal operation.
2. Keep light away (3 feet) from items subject to high heat risk.
3. Avoid long duration of direct eye contact with light while in operation.
4. Do not operate if glass diffuser or stand is damaged or inoperable.
This unit can become extremely hot while in operation. Do not touch the unit until the light has had
enough time to cool down. Make sure the light(s) is spaced far enough away from all combustible
materials and/or surfaces. Adequate ventilation to aid in heat dissipation is advised during operation.
For question/comments, please contact at 1-855-508-3883 or through an authorized reseller.
TO USE
1. Plug cord into an electrical grounded outlet.
2. Press the On/Off switch on the back of the light for operation.
3. Use side knobs to adjust light to desired position(s).
LIGHT AND POWER CORD SHOULD NEVER BE SUBMERGED IN WATER!
2
This product is guaranteed against failure due to the factory defects in materials workmanship
for five years from the date of purchase. This warranty does not cover normal wear of parts or
damage resulting from any misuse of the product.
Important: This warranty is only valid if the product has been purchased through an authorized
reseller. Proof of purchase is required for repair or replacement. Misuse of the product includes
but is not limited to: washing the product, using in extreme weather conditions, opening the
products, or try to remodel the product.
5 YEAR LIMITED WARRANTY
