Product May Vary Slightly From Pictured.
This Product is Distributed Exclusively by
2040 N Alliance Ave, Springeld, MO 65803
Customer Care
1 (800) 375-7520
www.staminaproducts.com
CAUTION:
Weight on this product should not exceed 250 lbs.
Owner's
Manual
STAMINA PRODUCTS
MADE IN CHINA
©
2024 Stamina Products, Inc.
2024, 02
When calling for parts or
service, please specify
the following numbers
:
Model#: 50-0900
S/N: _____________
Exercise can present
a health risk. Consult
a physician before
beginning any exercise
program with this
equipment. If you feel
faint or dizzy, immediately
discontinue use.
Serious bodily injury can
occur if this equipment is
not assembled and used
in accordance with the
owner’s manual.
Follow all safety
intructions in this owner’s
manual.
!
WARNING
TABLE OF CONTENTS
Safety Instructions ...................................... 2
Before You Begin ........................................ 4
Equipment Warning, Caution & Notice Labels
... 5
Hardware Identication Chart .................... 6
Assembly Instructions ................................ 7
Operational Instructions ............................. 9
Lubrication Instructions ........................... 10
Storage ....................................................... 11
Maintenance ............................................... 11
Conditioning Guidelines ........................... 12
Warm-Up and Cool-Down ......................... 13
Product Parts Drawing .............................. 14
Parts List .................................................... 15
Warranty ..................................................... 17
Fax/Mail Ordering Form ............................ 18
SAFETY INSTRUCTIONS
2
!
WARNING
Cancer and Reproductive Harm www.P65Warnings.ca.gov
Consult your physician before starting this or any exercise program. This is
especially important if you are over the age of 35, have never exercised before,
are pregnant, or suer from any health problem. This product is for home use
only. Do not use in institutional or commercial applications. Failure to follow all
warnings and instructions could result in serious injury or death.
To reduce the risk of serious injury, read the following Safety Instructions before
using the Better Squat Trainer.
!
WARNING
!
WARNING
The Better Squat Trainer should only be used after a thorough review of the Owner’s Manual by all
exercisers and saved for future reference.
Make sure that the product is properly assembled and tightened before use.
We recommend that two people be available for assembly of this product.
Keep children and pets away from the Better Squat Trainer at all times. This product is for adult use
only.
It is recommended that you place this product on an equipment mat.
Set up and operate the Better Squat Trainer on a solid level surface. Do not position the product on
loose or uneven surfaces.
Make sure that adequate space of 4 feet wide x 6 feet long is available for access to and around
the product.
KeepngersclearofallpinchpointswhenfoldingandunfoldingtheBetterSquatTrainer.
Before using, always inspect the product for worn parts that should be replaced or loose parts that
should be tightened.
Do not attempt to adjust the seat while you are on the Better Squat Trainer.
Make sure the Uprights (2) are locked properly by the Locking Knobs (18).
Alwayschoosetheworkoutwhichbesttsyourphysicalstrengthandexibilitylevel.Knowyour
limits and train within them.
Do not wear loose clothing while using the Better Squat Trainer.
Always wear proper footwear such as running, walking, or cross training shoes.
Be careful to maintain your balance while assembling, mounting, using and dismounting the Better
Squat Trainer. Loss of balance may result in a fall or serious bodily injury.
The Better Squat Trainer should not be used by persons weighing over 250 pounds.
The Better Squat Trainer should be used by only one person at a time.
The Better Squat Trainer is for consumer use only. It is not for use in public or semipublic facilities.
NEED HELP?
CONTACT US FIRST
1 (800) 375-7520
customer.care@staminaproducts.com
Hi! From all of us here at Stamina Products, thank you for your purchase. We
know that you have big fitness goals in mind and we are here to help you along.
Call us, email us, or send us a message on Facebook. Be sure to contact us if you
have any questions on your new product. We look forward to hearing from you!
With your body in mind,
Stamina Customer Care
To enact your extended warranty and to help us better
serve you, please go online and register your new product.
register.staminaproducts.com
ONLINE
customer.car[email protected]om
www.staminaproducts.com
TELEPHONE
1 (800) 375-7520
FAX
(417) 889-8064
MAIL
Stamina Products, Inc.
ATTN: Customer Care
2040 N Alliance Ave
Springfield, MO 65803
facebook.com/StaminaProducts
facebook.com/AeroPilates
CUSTOMER CARE HOURS:
Monday-Thursday, 7:30 AM-5:00 PM, Central Time
Friday, 8:00 AM-3:00 PM, Central Time
It is quick and easy to register online, but if you’re a little old school or just need a
reason to raise that little flag on your mailbox, fill out the info on the last page of this
manual and mail it in.
BEFORE YOU BEGIN
4
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :
Gas Spring
Caution Label
Left Footplate
Base Frame
Wheels
Locking Knob
Handlebar
Upright
Swing Arm
Pull Pin
Seat Post
Foam Grip
Upright Cover
Top Cover
Adjustment Knob
Thank you for choosing the Better Squat Trainer.
We take great pride in this quality product and
hope it will provide many hours of quality exercise
to make you feel better, look better, and enjoy life
to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health.
Too often, our busy lifestyles limit our time and
opportunity to exercise. The Better Squat Trainer
provides a convenient and simple method to begin
your journey of getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the
drawing below and familiarize yourself with the
parts that are labeled. Locate the serial decal on
the product and write the serial number on the
cover of the manual in the space provided. See
page 6 for an image of the serial decal. Model
number and serial number are required when
calling for assistance.
Read this manual carefully before using the
Better Squat Trainer.
Providing you with a quality product is Stamina's
top priority. However, sometimes there could be a
missing or incorrectly sized part. If you have any
questions or problems with the parts included with
your Better Squat Trainer, please do not return the
product. Contact us FIRST!
If a part is missing or defective, please contact
Customer Care for assistance. Call us toll free
at 1-800-375-7520 (in the U.S.) or live chat on
staminaproducts.com.OurCustomerCareStais
available to assist you from 7:30 A.M. to 5:00 P.M.
(Central Time) Monday through Thursday and 8:00
A.M. to 3:00 P.M. (Central Time) on Friday.
Be sure to have the name and model number of
the product available when you contact us.
Serial Decal
Allen Wrench w/ Screwdriver (5mm)
Seat
Top Cover
This chart is provided to help identify the warning, caution, and notice labels on the Better Squat
Trainer. Please take a moment to familiarize yourself with all of the warning, caution, and notice
labels.
EQUIPMENT WARNING, CAUTION & NOTICE LABELS
5
WARNING LABEL(50)
PINCH POINT DECAL(51)
To best serve you, our Customer Care Representatives
will need your serial number. For quick access, write
in your serial number on the cover of the manual.
SERIAL DECAL(53)
SHOCK CAUTION(52)
6
length
length
mm.
in.
INCHES
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
MILLIMETERS
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6
6 8 10 12
3/16" 1/4" 5/16" 3/8" 1/2"
HARDWARE IDENTIFICATION CHART
Part Number and Description Qty
34 Bolt, Button Head
(M8 x 1.25 x 15mm)
4
39 Screw, Round Head Self-Tapping
(M4 x 12mm) 6
2
3
2
1
1
2
18
9
7
3
5
2
18
42
42
ASSEMBLY INSTRUCTIONS
7
STEP 1
Remove your Better Squat Trainer from its packaging, placing the product as shown in the illustration A.
Lift up from the HANDLEBAR(5) to unfold the unit. Refer to illustration B. Lock the UPRIGHTS(2) to the
BASE FRAME(1) with the LOCKING KNOBS(18) and WASHERS(M8)(42). Connect the GAS SPRING(7)
to the bracket in the SWING ARM(3) and secure with the PULL PIN(9).
Placeallpartsfromtheboxinaclearedareaandpositionthemontheoorinfrontofyou.Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer[email protected], or call us toll free at 1-800-375-7520
(intheU.S.).OurCustomerCareStaisavailabletoassistyoufrom7:30A.M.to5:00P.M.(Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are t tested at the factory to ensure proper t and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
Lift up from the Handlebar(5)
to unfold the unit.
A.
B.
ASSEMBLY INSTRUCTIONS
8
STEP 2
Attach the LEFT and RIGHT FOOTPLATES(16, 15) to the FOOTPLATE SUPPORTS(6) with TAPPING
SCREWS(M4x12mm)(39). Hook the LEFT and RIGHT FOOTPLATES(16, 15) to both sides of the BASE
FRAME(1). There are adjustment holes in the BASE FRAME(1) to allow the FOOTPLATES(15, 16) to be
hookedontodierentpositionsasyoudesire.
STEP 3
Attach the SEAT(8) to the SEAT POST(4) with BUTTON HEAD BOLTS(M8x1.25x15mm)(34). Insert
the SEAT POST(4) into the SWING ARM(3) and secure with the ADJUSTMENT KNOB(17). There are
adjustment holes in the SEAT POST(4) to allow the SEAT(8) to be adjusted to the best position for your
height.
NOTE: To adjust the SEAT(8), turn the ADJUSTMENT KNOB(17) counter clockwise to loosen, but do
not remove, then pull the ADJUSTMENT KNOB(17) to release the pin. Slide the SEAT POST(4)
to desired position. Release the ADJUSTMENT KNOB(17) making sure the pin catches in one of
the holes of the SEAT POST(4) and securely tighten the ADJUSTMENT KNOB(17).
17
8
34
1
3
4
6
6
15
16
39
39
39
OPERATIONAL INSTRUCTIONS
9
Get Started with The Better Squat Trainer
1. Adjust the position of the seat so that when you straddle
the swingarm, with your feet on the footplates, your butt
rests on the seat.
2. When you’ve found the correct seat position, straddle the
seat, and align your hips and torso with the swingarm.
3. Reach forward with arms extended to grab the handlebar
with a light grip.
4. Place your feet on the footplates and keep your weight
toward your heels.
5. With your core engaged and your shoulders pulled back
down, engage your glutes and keep your knees over the
middle of your feet.
6. To descend into a squat, keep your grip on the handlebar,
push your hips back like you’re sitting in a chair, and bend
at the knees. Lower down to a comfortable squat depth
and slowly progress to deeper squats only as you gain
strengthandcondence.
7. To come back up, keep your core and glutes engaged,
then press down through your feet with most of the weight
on your heels.
8. Squeeze your glutes at the top of the squat.
You should not feel strain or pain in your back or knees
during this exercise. If you feel strain in your knees or
back, ensure you are using proper form as recommended
and consider a shorter range of motion. If strain or pain
persists, cease use and consult with your doctor before
continuing use.
LUBRICATION INSTRUCTIONS
2
3
24
24
26
26
26
24 26
NOTICE: Over time and with avid use, your Better Squat Trainer may develop a squeak. Please
follow the steps below to resolve this issue.
STEP 1
Disconnect the GAS SPRING(7) and the SWING ARM(3)
by pulling out the PULL PIN(9).
STEP 2
Remove the SWING ARM(3) by unscrewing the SHOULDER
BOLTS(M8x1.25, ø10x29.2mm)(32) from the UPRIGHTS(2).
Lubricate the SPACERS(24) and
PLASTIC BUSHINGS(26) with 100%
Silicone Oil or White Grease.
2
9
7
3
32
32
STEP 3
Remove the SPACERS(24) from the SWING ARM(3). Remove the PLASTIC BUSHINGS(26) from the
UPRIGHTS(2). Lubricate the SPACERS(24) and PLASTIC BUSHINGS(26) as shown in the following
illustration.
2
9
7
26
32
32
3
24
STEP 4
Place the SPACERS(24) back onto the SWING ARM(3). Press
the PLASTIC BUSHINGS(26) back into the UPRIGHTS(2).
Attach the SWING ARM(3) to the UPRIGHTS(2) with
SHOULDER BOLTS(M8x1.25, ø10x29.2mm)(32).
STEP 5
Connect the GAS SPRING(7) to the bracket in the SWING
ARM(3) and secure with the PULL PIN(9).
Lubricate this round
end face.
Lubricate this round
end face.
Lubricate the inner side. Lubricate the outer side.
10
1. Adjust the SEAT(8) to the shortest position. Disconnect the GAS SPRING(7) and the SWING ARM(3)
by pulling out the PULL PIN(9). Remove the LOCKING KNOBS(18) and WASHERS(M8)(42) from
the UPRIGHTS(2). Fold the UPRIGHTS(2) backward.
2. Screw the LOCKING KNOBS(18) and WASHERS(M8)(42) to the BASE FRAME(1) after folding.
Insert the PULL PIN(9) back into the bracket in the SWING ARM(3).
STORAGE
11
1
2
9
7
3
2
3
9
1
8
18
18
42
42
18
42
18
42
2.1.
The safety and integrity designed into the Better Squat Trainer can only be maintained when the Better
Squat Trainer is regularly examined for damage and wear. Special attention should be given to the
following:
MAINTENANCE
To store the Better Squat Trainer, simply keep it in a clean dry place.
To move the Better Squat Trainer, hold the back end of the Better Squat Trainer and tilt the Better
Squat Trainer onto the wheels under the FRONT LOWER COVER(11) at the front.
The minimum folded dimensions of the Better Squat Trainer are approximately 53.6 inches long x
22.3 inches wide x 9.1 inches tall. Please measure your Better Squat Trainer if exact dimensions are
needed.
Follow the illustrated process below to fold the Better Squat Trainer for storage.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
Verify that the CAUTION LABEL(50) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(50) if it is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged parts must be replaced immediately or the Better Squat Trainer removed from
service until repair is made.
Only Stamina Products supplied components should be used to maintain/repair the Better Squat
Trainer.
KeepyourBetterSquatTrainercleanbywipingitowithanabsorbentclothafteruse.
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or
threengersonyourwristandtakeasixsecondheartbeatcount.Multiply
theresultsbytentondyourheartrate.Forexample,ifyoursixsecond
heartbeat count is 14, your heart rate is 140 beats per minute. A six second
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.
wrist pulse
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
builduptohigherintensityasyoubecomemoreaerobicallyt.
If you feel dizzy or lightheaded you should slow down or stop exercising.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.
CONDITIONING GUIDELINES
Target Heart Rate Zone Estimated by Age*
* For cardiorespiratory training benefits, the American College of Sports Medicine recommends
working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the
maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
Average Maximum
Heart Rate 100%
Age
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
12
WARM-UP and COOL-DOWN
Warm-Up
The purpose of warming up is to prepare your body for exercise and to minimize injuries.
Warm up for two to ve minutes before strength training or aerobic exercising. Perform activities that
raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place.
Cool-Down
The purpose of cooling down is to return the body to its normal, or near normal, resting
state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool down should be completed after each strength training session.
13
7
45
42
46
45
33
28
9
1
2
2
3
4
5
6
6
8
10
11
12
12
10
13
15
16
14
14
47
35
35
17
19
20
21
23
24
24
18
22
22
48
48
26
26
26
27
36
27
36
28
29
29
29
29
25
30
30
30
30
31
41
41
31
32
32
34
44
34
44
34
49
37
37
36
36
36
36
39
39
39
36
36
40
43
47
25
53
50
51
52
54
54
42
18
42
26
38
PRODUCT PARTS DRAWING
14
FRONT
BACK
PART# PART NAME QTY
PARTS LIST
15
1 Base Frame 1
2 Upright 2
3 Swing Arm 1
4 Seat Post 1
5 Handlebar 1
6 Footplate Support 2
7 Gas Spring 1
8 Seat 1
9 Pull Pin 1
10 Top Cover 2
11 Front Lower Cover 1
12 Cover Pad 2
13 Rear Lower Cover 1
14 Wheel 2
15 Right Footplate 1
16 Left Footplate 1
17 Adjustment Knob 1
18 Locking Knob 2
19 Seat Bushing 1
20 Oval Plug (30 x 60mm) 1
21 Oval Plug (25 x 50mm) 1
22 Round Plug (ø25mm) 2
23 Seat Bumper 1
24 Spacer 2
25 Upright Endcap 2
26 Plastic Bushing 4
27 Upright Cover 2
28 Gas Spring Spacer 2
29 Oilless Bearing 4
30 Button Pin 4
31 Shoulder Bolt, Button Head
(M8 x 1.25, ø10 x 36.6mm)
2
32 Shoulder Bolt, Button Head
(M8 x 1.25, ø10 x 29.2mm)
2
33 Bolt, Button Head (M8 x 1.25 x 32mm) 1
34 Bolt, Button Head (M8 x 1.25 x 15mm) 6
35 Bolt, Socket Head (M6 x 1 x 40mm) 2
36
Screw, Round Head Self-Tapping (M4.2 x 12mm) 20
37 Screw, Round Head
(M4 x 4.5mm) 2
38
Screw, Round Head Self-Tapping (M4 x 25mm) 1
39
Screw, Round Head Self-Tapping (M4 x 12mm) 6
40 Carriage Bolt (M6 x 1 x 38mm) 2
41 Washer (M10) 2
42 Washer (M8) 3
43 Washer (M6) 2
44 Arc Washer (M8) 2
45 Plastic Washer (M8) 2
46 Nylock Nut (M8 x 1.25) 1
47 Nylock Nut (M6 x 1) 4
PART# PART NAME QTY
PARTS LIST
16
48 Foam Grip 2
49 Washer (M5) 1
50 Caution Label 1
51 Pinch Point Decal 1
52 Shock Caution 1
53 Serial Decal 1
54 Rubber Pad 2
55 Allen Wrench w/ Screwdriver (5mm) 1
56 Manual 1
LIMITED WARRANTY
WARRANTY
MODEL 50-0900
17
Stamina Products, Inc. (“Stamina”) warrants to the original purchaser that this product will be free from
defects in materials and workmanship that arise under normal use, service, proper assembly and proper
operation in accordance with product warnings/instructions for a period of 90 days on the parts and one
year on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY
SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE,
ABUSE, MISUSE, ALTERATION OF ANY KIND OR TO ANY DEFECT OR CHANGE CAUSED BY
IMPROPER ASSEMBLY, REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS NOT
PROVIDED BY STAMINA. Commercial use includes use of product in athletic clubs, health clubs, spas,
gyms, and all other public or semipublic facilities whether or not the product’s use is in furtherance of a
protmakingenterprise,andallotherusewhichisnotforpersonalpurposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. 2040 N Alliance
Ave,Springeld,Missouri,USA,MO65803,oremailusatcustomer[email protected],orcall
us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to return
the product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE
THAN ONE (1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE
BEEN DISCOVERED. NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY (INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) MAY BE COMMENCED MORE
THAN ONE (1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. These warranties
are not transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED
WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE
EXCLUSIVE REMEDY. If any claim is made under this limited warranty or any implied warranty, Stamina
reserves the right to require the product to be returned for inspection, at the purchaser’s expense, to
Stamina’s premises in Springfield, Missouri. Return of the enclosed warranty registration card is not
required for warranty coverage, but is merely a way of establishing the date and place of purchase.
Stamina SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL, SPECIAL
OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED
WARRANTY.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY. NO ORAL OR WRITTEN
INFORMATION GIVEN BY STAMINA, ITS AGENTS OR EMPLOYEES, SHALL CREATE A WARRANTY
OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.Thiswarrantygivesyouspeciclegal
rights, and you may also have other legal rights which vary from state to state. ANY OTHER RIGHT
WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Thelawsinsomestatesaectthedisclaimerorlimitationofimpliedwarrantiesandconsequentialand
incidental damages. If any such law is found applicable, the foregoing disclaimers and limitations of and
onimpliedwarrantiesandconsequentialandincidentaldamagesshallbedeemedtobemodiedtothe
extent necessary to comply with applicable law.
Model Number: ...................................................................................... Serial Number: .............................................................................................
Product Name: ..................................................................................................................................................................................................................................
Place Purchased: ..............................................................................................................................................................................................................................
Date of Purchase: .................................................................................. Purchase Price: ............................................................................................
First Name: ............................................................................................ Last Name: ...................................................................................................
City: .................................................................. State: ................................................................ Zip Code: .................................................
Email Address: ....................................................................................... Phone #: ( ) ......................................................................................
WouldyouliketoreceiveemailinformationorspecialoersfromStaminaProducts?*____Yes____No
*If yes, be sure your email address is included above.
Stamina Products, Inc.
2040 N Alliance Ave, Springeld, MO 65803
If there are missing or damaged parts, you can go to parts.staminaproducts.com and order those parts. If you have questions,
please contact customer care. Do not return the product. To order parts by mail, fill out the sheet below and fax it to
417-889-8064. The part will be mailed to your address.
Mr./Ms: ..............................................................................................................................................................................................................................................
Address: ........................................ ............................................................................................. Apt. #:..........................................................................
City: .................................................................. State: ................................................................ Zip Code: .................................................
IMPORTANT : We require your phone number to process the order!
Phone #: ( ) ................................................................................ Work Phone #: ( ) .............................................................................
Date of Purchase: ..................................................................................
Model #: ............................................................................................................................................................................................................................................
Purchased From: ..............................................................................................................................................................................................................................
IMPORTANT: Before lling out the portion below, make sure you have the correct information.
Refer to the parts list to make sure you're ordering the right parts!
Stamina Products, Inc.
2040 N Alliance Ave, Springeld, MO 65803
Detach and Mail or Fax the Form Above
TO CONTACT CUSTOMER CARE
For your convenience, Stamina’s customer care representatives can be reached by email at customer.care@staminaproducts.
com or by phone at 1-800-375-7520 (in the U.S.). Our customer care representatives are available Monday through Thursday
from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.
TO REGISTER YOUR PRODUCT
WouldyouliketorecieveemailinformationorspecialoersfromStaminaProducts?Registeratcontact.staminaproducts.com
TELEPHONE
CUSTOMER CARE
Tel: 1 (800) 375-7520
FAX
CUSTOMER CARE
Fax: (417) 889-8064
MAIL
STAMINA PRODUCTS, INC.
ATTN: Customer Care
2040 N Alliance Ave, Springeld, MO 65803
ONLINE
CUSTOMER CARE
customer[email protected]
www.staminaproducts.com
To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model
number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your
product) ready.
Ifyoudon’thaveinternetaccess,youcancallcustomercareat1-800-375-7520,orlloutandmailtheproductregistrationform
belowtoStaminaProducts,Inc.;2040NAllianceAve,Springeld,MO65803.
PRODUCT REGISTRATION FORM
TO ORDER PARTS
Detach and Mail or Fax the Form Below
PARTS ORDER FORM
PART # DESCRIPTION QUANTITY
1 Rear Unit Assembly 1
EXAMPLE:
