VIBRATION ALARM
IMPORTANT SAFETY INFORMATION
Button/Coin Battery Safety
WARNING
• INGESTION HAZARD: This product contains
a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause
Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH OF CHILDREN
• Seek immediate medical attention if a battery is suspected
to be swallowed or inserted inside any part of the body.
This symbol means:
INGESTION HAZARD: This product contains a button cell or coin battery.
1. Remove and immediately recycle or
dispose of used batteries according to
local regulations and keep away from
children. Do NOT dispose of batteries
in household trash or incinerate.
2. Even used batteries may cause
severe injury or death.
3. Call a local poison control center
for treatment information.
4. Non-rechargeable batteries
are not to be recharged.
5. Do not force discharge, recharge,
disassemble, heat above 122°F or
incinerate. Doing so may result in injury
due to venting, leakage or explosion
resulting in chemical burns.
6. Ensure the batteries are installed correctly
according to polarity (+ and -).
7. Do not mix old and new batteries, different
brands or types of batteries, such as alkaline,
carbon-zinc, or rechargeable batteries.
8. Remove and immediately recycle or
dispose of batteries from equipment
not used for an extended period of
time according to local regulations.
9. Always completely secure the battery
compartment. If the battery compartment
does not close securely, stop using
the product, remove the batteries, and
keep them away from children.
Specifications
Battery Type 1.5V LR44 x 3
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Due to continuing improvements, actual product may differ slightly from photo.
For technical questions, please call 1-888-866-5797. Item 95054
SAVE THESE INSTRUCTIONS
UPC 193175509437
24a
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Functions
Switch
Battery
Compartment
Screw
Installation
1. Select and clean mounting surface.
2. Remove film from tape on back of alarm.
3. Mount Alarm securely by pressing it
firmly in place for 30 seconds.
Operating Instructions
1. Slide switch to ON to arm Alarm.
2. Alarm will sound when intense
vibration is detected.
3. If alarm or chime tone weakens,
change batteries.
Battery Replacement
1. Remove screw(s) and open
battery compartment.
2. Remove battery and dispose of properly.
3. Insert new battery in correct polarity, close
compartment and replace screw(s).
