CR1001i
Projection Alarm Clock with Bed Shaker
CREATE YOUR PERFECT SLEEP ENVIRONMENT
- 01 - - 02 -
Chapter 2 POWERING ON
1. Install 2pcs 1.5V “AAA” size batteries to the proper terminals in
the battery compartment to memorize the time/alarm setting in
case of power outage.
NOTE: Batteries(not included) don't support time display but alarm will still
goes off in case of AC power failure
2. Connect the adapter line to DC jack , then plug into a 100~240V
AC wall power outlet.
Chapter 3 TIME SETTING
1. Press button once, display starts flashing.
2. Press button to set the hour. press button to set
the minute.
3. Press button or button to save time or wait for
another 5 seconds to confirm automatically.
4.To change 12H/24H time format
Hold press to change 12H/24H time format.
SET
TIME
HOUR
MIN
Chapter 1 LOCATION OF CONTROLS
SNOOZE
SLEEP
SET
TIME
SET
TIME
Made in PRC
Http://www.mesqool.com
Contact our experts
SNOOZE
SLEEP
Version 4.1
1.SET TIME BUTTON
2.HOUR BUTTON
3.MINUTE BUTTON
4.DIMMER/DST BUTTON
5.SNOOZE/OK BUTTON
6.ALARM 1
7.ALARM 2
8.ALARM ON/PAUSE
9.PROJECTION ON/FLIP/OFF
10.VOLUME+ BUTTON
11.VOLUME- BUTTON
12.AM INDICATOR
13.PM INDICATOR
14.ALARM 1 INDICATOR
15. ALARM 2 INDICATOR
16. DST INDICATOR
17. RING INDICATOR
18. BED SHAKER INDICATOR
19. FOCUS RING
20. BATTERY COMPARTMENT
21. USB PORT
22. DC JACK
23.BED SHAKER PORT
24.SPEAKER
25.HOLDER ( x 2pcs)
26. PROJECTION DIMMER
10
11
1
2
3
4
5
6
7
8
9
12
13
14
17
18
17
SNOOZE
SLEEP
15
16
20
22
23
21
24
25
19
26
ALA
R
M O
FF
H
OLD P RESS F
O
R
HO
LD P
R
ESS F
OR
A
LA
R
M OF
F
Chapter 6 PROJECTION MODE
1. Press Projection mode button to turn on projection.
2. Press button once again to flip the projection time
reversely when the time projected backwards.
3. Press once again to turn off projection.
PROJECTION
ON/FLIP/OFF
PROJECTION
ON/FLIP/OFF
Turn OFF
Note: 1. Best projection distance is 1.5 to 3.0 meters (4.92 to 9.84 feet).
2. Projector is a common LED light. So the projector is not visible in bright
environment.
4. Rotate focus ring to adjust clarity of projection image.
Note: if projection number is fuzzy,please rotate the focus ring (17) to adjust
proper angle for clear projection image.
1. Press button, the alarm indicator will light up,
the display starts flickering.
2. Press button to set the hour, press button to set
the minute.
3. Press button or button to save alarm time or
just wait for another 5 seconds to confirm automatically.
4. Push or button to adjust alarm volume.
5.Press button to save volume setting.
Turn off Alarm
When alarm goes off:
1. Press button to temporarily turn off alarm for 9
minutes. Alarm will ring every next 9 minutes.
2. Press button or button to turn off alarm for 24
hours. The alarm indicator is still on, which means alarm is
still activated and will ring after 24 hours.
3. When alarm is off, press button to active the alarm,
setting will be the same as last time.
4. Cancel Alarm
Hold press button until the alarm indicator will
disappear from the display, the alarm will never goes off.
Setting ALARM 2 is the same as ALARM 1.
- 05 - - 06 -
- 04 -
Chapter 4 ALARM SETTING
ALARM
1
- 03 -
1
VOL+ VOL-
SNOOZE
SLEEP
1
ALARM
1
HOUR MIN
1
ALARM
1
SNOOZE
SLEEP
Chapter 5 Bed Shaker
1. Plug the bed shaker adapter into the jack on back of clock as below.
The indicator on the display will light up which means
ring and bed shaker will enable at the same time when alarm goes
off.
2. Press button until volume level 0, the indicator will
light down which means only bed shaker will enable when alarm
goes off.
3. Unplug the bed shaker adapter, the indicator will light up
the indicator will light down which means only ring will
enable at default volume level when alarm goes off.
Chapter 7 PROJECTION DIMMER
Chapter 9 USB CHARGING
Plug charging cable into device such as phone or tablet.
Device can charge both your phone or tablet at the same time.
The maximum charge current is 1 Ampere.
22:23
2
89%
E
E
1
ALARM
1
VOL-
Repeat press button to adjust the brightness of display for
your preference.
Hold press button to switch DST function.
Chapter 8 DIMMER & DST
DIMMER
DST
DIMMER
DST
PROJECTION
ON/FLIP/OFF
After finish alarm setting
SNOOZE
SLEEP
press button to adjust the brightness of projection for
your preference.
PROJECTION
DIMMER
ALARM
ON/PAUSE
ALARM
ON/PAUSE
