Use and
Care Guide
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this shaver.
DANGER
To reduce the risk of electric shock:
• Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
• Do not use while bathing or in the
shower.
• Do not place or drop into water or
other liquid.
• Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
• Except when charging, always
unplug this appliance from the
electrical outlet immediately after
using.
• Use only when the shaver is in dry
condition.
• Detach the appliance from the
power supply cord before cleaning.
• Do not submerge in water.
WARNING
To reduce the risk of burns, fire,
electric shock, or injury to persons:
• An appliance should never be left
unattended when it’s plugged
in, except when charging a
rechargeable appliance.
• Close supervision is necessary
when this appliance is used by, on,
or near children, or individuals with
special needs or certain disabilities.
• Use this appliance only for its
intended use as described in this
manual. Do not use attachments not
recommended by the manufacturer.
• Never operate this appliance if it
has a damaged cord or plug or if
it is not working properly, if it has
been dropped or damaged, or if it
has been dropped into water.
• Keep the cord away from heated
surfaces.
• Never drop or insert any object into
any of the appliance’s openings.
• Household use only.
IMPORTANT SAFETY
INSTRUCTIONS
• Do not use outdoors or operate
where aerosol (spray) products
are being used or where oxygen is
being administered.
• Always attach the plug to the
appliance, then to outlet. To
disconnect, turn all controls to OFF,
then remove plug from outlet.
• Always pull on cord plug to unplug
from wall socket. Never pull on
electric cord.
• Do not plug or unplug this
appliance when your hands are
wet.
• Do not use an extension cord
or a voltage converter with this
appliance.
• Do not wrap the cord around the
appliance.
SAVE THESE INSTRUCTIONS
• Always store this appliance and
cord in a moisture-free area. Do not
store it in temperatures exceeding
140°F (60°C).
• Detach removable power cords
from appliance for storage.
• Do not use this appliance with a
damaged or broken head or cutters,
as facial injury may occur.
• Shavers, including the trimmer, are
for use on facial hair only. They
should not be used for shaving the
hair on your head or any other part
of your body.
• The power unit is intended to be
correctly oriented in a floor mount
position.
Product Features
Shaver Parts
1. On/Off Slide Switch
2. Foils
3. Cutter Assembly
4. Hair Pocket: the space inside the
cutter assembly
5. Charging Port
6. Pop-up Trimmer
7. Protective Head Guard
8. Cleaning Brush
9. USB Charging Cable (not shown)
About Your Shaver
Cordless/Rechargeable - The shaver can only be used without the power cord.
Indicators:
Single LED - Solid green light indicates shaver is charging. Light will stay on at full
charge until unplugged.
Before using, read the important safety instructions in front of the manual.
1. Plug USB charging cable into shaver (A).
2. Plug USB charging cable into a standard USB type-A wall adaptor
(output: 5Vdc). The LED charging indicator will glow green.
NOTE: Your shaver will have a partially charged battery. We
recommending giving the battery a full charge prior to your first
use.
Use the product until the battery is low. To preserve the life of the batteries, let
them fully run out every six months, then recharge them for a full 24 hours.
CAUTION!
• Make sure the shaver and your hands are dry when placing the shaver on charge.
• Always charge the shaver in a cool, dry place.
Charging
A
Shave
Shaving Tips
Before using, read the important safety instructions in front of the manual.
1. Begin by removing the protective head guard from your shaver.
2. Slide up On/Off slide switch to turn on (B).
3. Stretch the skin with your free hand so the hairs stand upright.
4. Hold the shaving head so all screens touch your skin
simultaneously. The independently floating foils automatically
adjust to the contours of your face. Only apply light pressure
on the shaving head while shaving and use short, circular
strokes (C).
5. After shaving, turn the shaver off (B).
Remington recommends that you use your new shaver daily for up to three
weeks to allow time for your hair and skin to become accustomed to the new
shaving system.
• Ensure your skin is dry and free of oils.
• Wait at least 15 minutes after getting up before shaving, to ensure your face is free
of puffiness that may be present from sleeping.
• Always hold the shaver at a right angle to the skin so the screens are touching the
skin with equal pressure.
• Stretch skin with the free hand so hairs stand upright, making it easier for them to
enter the cutting chamber.
• Shave with short, circular strokes. The use of short, circular motions in stubborn
areas may obtain a closer shave, especially along the neck and chin line.
• Do not press hard against the skin in order to avoid damage to the
foil heads.
FEATURE F3010
POWER SYSTEM Cordless/Rechargeable
BATTERY TYPE NiMH
FULL CHARGE TIME 10 hours
CORDLESS SHAVE TIME up to 40 minutes
INDICATORS Single LED when charging
VOLTAGE 5Vdc
REPLACEMENT PART NO.
SPF-PF73A
C
AB
Product may vary slightly from what is illustrated.
Trim
1. Slide trimmer release button up to engage the
trimmer (D).
2. Trim long, difficult hairs and side burns (E).
3. Close trimmer by sliding the button down (F).
D
E
F
Rechargeable
Cordless Foil Shaver
F3010
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
F3010_30493_E_IB_A.indd 1F3010_30493_E_IB_A.indd 1 3/28/24 8:27 AM3/28/24 8:27 AM
When your rechargeable shaver reaches the end of its useful life, the batteries must be
removed from the shaver and recycled or disposed of properly in accordance with your
state and local requirements. If this is not required by law, you may elect to dispose of
the shaver with the batteries.
This device uses one of the following types of rechargeable batteries: nickel metal
hydride (NiMH), nickel cadmium (Ni-Cd) or Lithium Ion (Li-Ion) (see included battery for
indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED OF
IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. DO NOT
PUT IN FIRE OR MUTILATE, AS THE BATTERY MAY BURST OR RELEASE TOXIC
MATERIALS. DO NOT SHORT-CIRCUIT, AS THIS MAY CAUSE BURNS.
1. Remove phillips head screw at the base of the shaver.
2. Pry the outer sleeve off the shaver handle.
3. Pry back the housing cover off the shaver.
4. Snip the battery wires and remove the batteries.
5. Dispose of batteries properly.
Battery Removal Warranty
Limited Three-Year Warranty
Empower Brands, LLC warrants this product to the original purchaser against any
defects that are due to faulty material or workmanship for a three-year period from
the original date of consumer purchase. This warranty does not include damage to the
product resulting from accident or misuse. If the product should become defective within
the warranty period, we will replace it free of charge.
For more information call 800-736-4648 in the U.S. or Canada.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the installation or mainte-
nance of this product.
EMPOWER BRANDS, LLC SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
THREE YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state or province to province. Some states do not allow the exclusion
or limitation of incidental, special or consequential damages.
This warranty shall not be valid where it is contrary to U.S. and other applicable
laws, or where the warranty would be prohibited under any economic sanctions,
export control laws, embargos, or other restrictive trade measures enforced by the
United States or other applicable jurisdictions. This includes, without limitation,
any warranty claims implicating parties from, or otherwise located in, Cuba, Iran,
North Korea, Syria and the disputed Crimea region.
How to Order Shaver Accessories
Please refer to the shaver comparison and features chart near the front of
this manual that lists the correct replacement part number for your shaver.
It is very important to replace your head and cutters when necessary to ensure
a close, comfortable shave without irritation. We recommend they be replaced
every 6 months. Here are some signs of head and cutter wear, indicating that
replacement is needed:
• Irritation: As the heads get excessively worn you may experience some skin
irritation. This would be especially noticeable when you apply moisturizing lotion.
• Pulling: When the cutters wear you may feel a sense of pulling and a loss of
closeness when you shave. This is an indication that it is time to replace your
heads and cutters.
Empower Brands, LLC Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product from an
authorized source, you are not satisfied and would like a refund, return it with the sales
receipt indicating purchase price and date of purchase to the retailer from whom it was
purchased. Empower Brands, LLC will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning the
money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not completely
satisfied and would like a refund, keep your receipt and contact us at
[email protected] or call 800-736-4648 in the U.S. or Canada.**
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will include
applicable taxes, if any, paid by customer.
2. Please allow 4 – 6 weeks to receive your refund by check.
IMPORTANT SAFETY
INSTRUCTIONS - SAVE
THESE INSTRUCTIONS
DANGER - TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS
For connection to a power supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet.
Power Adaptor
Please do not throw this product away with normal household waste.
If possible, take it to an official collection point in your area that recycles this type
of product. Thank you for considering the environment.
5Vdc TYPE: F22B
Questions or comments: Call 800-736-4648 in the US or visit
RemingtonProducts.com.
Dist. by: Empower Brands, LLC, Middleton, WI 53562
®
Registered Trademark and
TM
Trademark of Empower Brands, LLC.
© 2024 Empower Brands, LLC All rights reserved. 03/24 30493
Made in China.
T22-7003208-A
Cleaning and Care
NOTE: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
For optimal shaver performance, clean your shaver after each use.
• Do not remove or replace head assembly while shaver is running as it may
cause damage to the unit’s screens and cutters.
• To clean the external surfaces of the shaver, use a damp cloth. Do not use strong
detergents or other chemicals.
• To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer
or heater to dry the shaver.
• The shaver should not be used until it has dried.
• Lubricate each cutter with household oil.
• This shaver has no user serviceable parts.
Daily Cleaning:
1. Grasp the raised grips on the cutter assembly and pull away from the shaver body.
The raised grips are on the front and back (G).
2. Tap the stubble from the foils and cutters.
3. Replace the cutter assembly.
Monthly Cleaning:
1. Grasp the raised grips on the cutter assembly and pull away from the shaver body.
The raised grips are on the front and back (G).
2. Tap the stubble from the foils and cutters.
3. Use the cleaning brush to sweep away loose hairs from the cutters and from
inside the hair pocket (H).
4. Replace the cutter assembly.
G
H
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
F3010_30493_E_IB_A.indd 2F3010_30493_E_IB_A.indd 2 3/28/24 8:27 AM3/28/24 8:27 AM
