F4010
Use and Care Guide
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this shaver.
DANGER
To reduce the risk of electric shock:
• Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
• Do not use a plugged in appliance
while bathing or in the shower.
• Do not place or drop into water or
other liquid.
• Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
• Except when charging, always
unplug this appliance from the
electrical outlet immediately after
using.
• Detach the appliance from the
power supply cord before cleaning.
• Do not submerge in water.
WARNING
To reduce the risk of burns, fire,
electric shock, or injury to persons:
• An appliance should never be left
unattended when it’s plugged
in, except when charging a
rechargeable appliance.
• Close supervision is necessary
when this appliance is used by,
on, or near children, or individuals
with special needs or certain
disabilities.
• Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by the
manufacturer.
• Never operate this appliance if it
has a damaged cord or plug or if
it is not working properly, if it has
been dropped or damaged, or if it
has been dropped into water.
• Keep the cord away from heated
surfaces.
• Never drop or insert any object into
any of the appliance’s openings.
• Household use only.
IMPORTANT SAFETY
INSTRUCTIONS
• Do not use outdoors or operate
where aerosol (spray) products
are being used or where oxygen is
being administered.
• Always attach the plug to the
appliance, then to outlet. To
disconnect, turn all controls to OFF,
then remove plug from outlet.
• Always pull on cord plug to unplug
from wall socket. Never pull on
electric cord.
• Do not plug or unplug this appliance
when your hands are wet.
• Do not use an extension cord
or a voltage converter with this
appliance.
• Do not wrap the cord around the
appliance.
SAVE THESE INSTRUCTIONS
• Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
• Detach removable power cords
from appliance for storage.
• Do not use this appliance with
a damaged or broken head or
cutters, as facial injury may occur.
• Shavers, including the trimmer, are
for use on facial hair only. They
should not be used for shaving the
hair on your head or any other part
of your body.
Product Features
Shaver Parts
1. On/Off button
2. Foils
3. Cutter assembly
4. Intercept trimmer
5. Hairpocket
6. Power port
7. Pop-up trimmer
8. Stubble comb/Head guard
9. Cleaning brush
10. USB charging cable (not shown)
About Your Shaver
Intercept Trimmer - Trims longer hairs so
they can easily enter foils to shave close.
Pivot - Shaver head pivots to adjust to any
angle on the face.
Cordless/Rechargeable - Shaver can only
be used without the power cord.
Quick Charge - Shaver will charge long
enough for one shave in 5 minutes.
Water Resistance
Wet/Dry – Shaver can be used in the
shower and with shaving gels. Can be
cleaned by rinsing under running water.
Before using, read the important safety instructions in front of the manual.
1. Plug USB charging cable into shaver (A).
2. Plug USB charging cable into any standard USB Type-A wall
adaptor.
Use the product until the battery is low. To preserve the life of the batteries, let
them fully run out every six months, then recharge them for 4 hours.
CAUTION!
• Make sure the shaver and your hands are dry when placing the shaver on charge.
• Always charge the shaver in a cool, dry place.
Charging
Shave
Shaving Tips (Dry)
Before using, read the important safety instructions in front of the manual.
1. Begin by removing the Stubble comb/Head guard from your
shaver.
2. Press the on/off button to turn on (D).
3. Stretch the skin with your free hand so the hairs stand
upright.
4. Hold the shaving head so all screens touch your skin
simultaneously. The independently floating foils automatically
adjust to the contours of your face.
Only apply light pressure on the shaving head while shaving
and use short, circular strokes (E).
5. After shaving, turn the shaver off (D).
Remington recommends that you use your new shaver daily for up to three
weeks to allow time for your hair and skin to become accustomed to the new
shaving system.
• Ensure your skin is dry and free of oils.
• Wait at least 15 minutes after getting up before shaving, to ensure your face is
free of puffiness that may be present from sleeping.
• Always hold the shaver at a right angle to the skin so the screens are touching
the skin with equal pressure.
• Stretch skin with the free hand so hairs stand upright, making it easier for them
to enter the cutting chamber.
• Shave with short, circular strokes. The use of short, circular motions in stubborn
areas may obtain a closer shave, especially along the neck and chin line.
• Do not press hard against the skin in order to avoid damage to the foil heads.
NOTE: To achieve a stubble look instead of a clean shave, affix the Stubble comb/
Head guard over the cutter assembly and shave as usual.
Indicators
2 Stage LED - Flashing green
light indicates battery needs to be
charged. Solid green light will turn
on when charging and turn off when
full charge reached.
Universal Use –
Shaver charges with USB cable.
Shaving Tips With Gel or Foam (In Shower or Over the Sink)
All models can be used in the shower for optimal performance.
NOTE: In order to ensure optimal performance, thoroughly rinse the shaver
head under water during and after shaving.
1. Apply water to face and neck area.
2. Apply shave gel or foam to applicable shaving area.
3. Rinse shaver head under water.
4. Shave face and neck using short, circular strokes.
5. Throughout the shave, regularly rinse shaver head under water to avoid residue
build up.
6. When finished shaving, rinse face.
7. Thoroughly rinse shaver head of all gel or foam.
8. Follow cleaning and care instruction.
E
FEATURE F4010
INTERCEPT TRIMMER Yes
PIVOT Yes
POWER SYSTEM Cordless/Rechargeable
BATTERY TYPE NiMH
FULL CHARGE TIME 4 hours
CORDLESS RUN TIME up to 50 minutes
5 MIN. QUICK CHARGE Yes
INDICATORS 2 Stage LED
WATER RESISTANCE Wet/Dry
VOLTAGE 5.0 Volt DC with USB cable
REPLACEMENT PART NO.
SPF-PFOG
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
Product may vary slightly
from what is illustrated.
D
A
F4010_30492_E_IB_A.indd 1F4010_30492_E_IB_A.indd 1 3/28/24 8:29 AM3/28/24 8:29 AM
Monthly Cleaning:
1. Perform the daily
cleaning steps 1-4.
2. Place a drop of
liquid soap on each
cutter and in the
hairpocket (M).
3. Brush the soap
around vigorously
with the supplied
cleaning brush.
Be sure to work
the soap into the
corners of the
hairpocket and into
any especially dirty
cutters (N).
4. Add a small amount
of water to the
cutters.
5. Replace the foil
assembly (O).
6. Turn on the shaver
for approximately
30 seconds.
7. While the shaver is
running, rinse the
foils under running water (P).
8. Turn off shaver.
9. Remove foil assembly.
10.Rinse the cutters, hairpocket, and
foil assembly thoroughly (Q).
11. Shake off excess water.
12. Replace foil assembly (O).
13. Allow shaver to dry before next
use and attach the Stubble comb/
Head guard.
The shaver is a wet/dry appliance. The
shaver may be cleaned under warm water.
Trim
Cleaning and Care
NOTE: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power adapter.
For optimal shaver performance, clean your shaver after each use.
CAUTION!
• Shaver can be placed under running water for cleaning only. Never submerge the
shaver in water.
• Do not remove or replace head assembly while shaver is running as it may
cause damage to the unit’s foils and cutters.
• To clean the external surfaces of the shaver, use a damp cloth. Do not use strong
detergents or other chemicals.
• To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer
or heater to dry the shaver.
• The shaver should not be used until it has dried.
• Lubricate each cutter with household oil.
• This product contains no user serviceable parts.
1. Slide trimmer release button up to engage the trimmer (F).
2. Trim long, difficult hairs and side burns (G).
3. Close trimmer by sliding the button down (H).
Daily Cleaning:
1. Pull off Stubble comb/Head guard, if
using, and rinse attachment.
2. Grasp the front and
back of the cutter
assembly and pull
away from the
shaver body (I).
3. Tap the stubble
from the foils and
cutters.
4. Use the cleaning
brush to sweep
any loose hairs
from the cutters,
hairpocket, and
trimmer. Pay
close attention
to cleaning out
the corners and
crevices inside the
hairpocket (J).
5. Rinse head under
running water (K).
6. Gently dry with towel or leave
disassembled to air dry.
7. Replace hair pocket assembly when
dry (L).
8. Reattach the Stubble comb/Head
guard to protect the shaving head
until next use.
When your rechargeable shaver reaches the end of its useful life, the batteries must be
removed from the shaver and recycled or disposed of properly in accordance with your
state and local requirements. If this is not required by law, you may elect to dispose of
the shaver with the batteries.
This device uses one of the following types of rechargeable batteries: nickel metal
hydride (NiMH), nickel cadmium (Ni-Cd) or Lithium Ion (Li-Ion) (see included battery for
indication of type).
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR DISPOSED OF
IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL REGULATIONS. DO NOT
PUT IN FIRE OR MUTILATE, AS THE BATTERY MAY BURST OR RELEASE TOXIC
MATERIALS. DO NOT SHORT-CIRCUIT, AS THIS MAY CAUSE BURNS.
To Remove the Rechargeable Battery:
1. Remove phillips head screw at the base of the shaver.
2. Pry the outer sleeve down off the shaver handle.
3. Pry the back housing cover off the shaver.
4. Remove screws from inner housing and open inner housing to expose the batteries.
5. Snip the battery wires and remove batteries.
6. Dispose of battery properly.
Product Disposal
Maintain your shaver’s peak
performance! Keep your shaver
performing like new!
• Because your satisfaction is
important to us, we want to make
it simple for you to keep your new
shaver performing at its peak.
• For the best possible shave, it is
necessary to replace the heads
and cutters on your shaver every 6
months.
• Remington makes this easy!
Two easy ways to order!
1. Call!
U.S. residents call 800-392-6544
2. Order Online at
RemingtonProducts.com
How To Order Shaver Accessories
Please refer to the shaver
comparison and features chart
near the front of this manual that
lists the correct replacement part
number for your shaver.
It is very important to replace your
head and cutters when necessary to
ensure a close, comfortable shave
without irritation. We recommend they
be replaced every 6 months. Here
are some signs of head and cutter
wear, indicating that replacement is
needed:
• Irritation: As the heads get
excessively worn you may
experience some skin irritation.
This would be especially noticeable
when you apply moisturizing lotion.
• Pulling: When the cutters wear you
may feel a sense of pulling and a
loss of closeness when you shave.
This is an indication that it is time
to replace your heads and cutters.
Input 5V DC
TYPE: F24A
Questions or comments: Call 800-736-4648 in the US or visit
RemingtonProducts.com.
Dist. by: Empower Brands, LLC, Middleton, WI 53562
®
Registered Trademark and
TM
Trademark of Empower Brands, LLC.
© 2024 Empower Brands, LLC All rights reserved. 03/24 30492
Made in China.
T22-7003209-A
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
DANGER - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
For connection to a power supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet.
Power Adaptor
F
G
H
L
I
J
K
P
N
O
Q
M
Warranty
Empower Brands, LLC Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product from an
authorized source, you are not satisfied and would like a refund, return it with the sales
receipt indicating purchase price and date of purchase to the retailer from whom it was
purchased. Empower Brands, LLC will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning the
money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not completely
satisfied and would like a refund, keep your receipt and contact us at
[email protected] or call 800-736-4648 in the U.S. or Canada.**
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will include
applicable taxes, if any, paid by customer.
2. Please allow 4 – 6 weeks to receive your refund by check.
Limited Four-Year Warranty
Empower Brands, LLC warrants this product to the original purchaser against any
defects that are due to faulty material or workmanship for a four-year period from the
original date of consumer purchase. This warranty does not include damage to the
product resulting from accident or misuse. If the product should become defective within
the warranty period, we will replace it free of charge.
For more information call 800-736-4648 in the U.S. or Canada.
Warranty excludes:
• Foils and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Wrapping cord around appliance causing premature wear and breakage
• Any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the installation or
maintenance of this product.
EMPOWER BRANDS, LLC SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
FOUR YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state or province to province. Some states do not allow the exclusion
or limitation of incidental, special or consequential damages.
This warranty shall not be valid where it is contrary to U.S. and other applicable
laws, or where the warranty would be prohibited under any economic sanctions,
export control laws, embargos, or other restrictive trade measures enforced by the
United States or other applicable jurisdictions. This includes, without limitation,
any warranty claims implicating parties from, or otherwise located in, Cuba, Iran,
North Korea, Syria and the disputed Crimea region.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Please do not throw this product away with normal household waste.
If possible, take it to an official collection point in your area that recycles this type
of product. Thank you for considering the environment.
F4010_30492_E_IB_A.indd 2F4010_30492_E_IB_A.indd 2 3/28/24 8:29 AM3/28/24 8:29 AM
