User Manual
Typhur InstaWhisk
v1.1
Milk Frother
Variable Speed Trigger
Removable Double Whisk
2 x AA batteries
Battery Compartment
Metal Stand
01
The more you press down, the higher
the speed will be
2
2
3
3
1
1
4
4
Installation Guide
Battery Installation:
1. Press firmly on the end of the battery cover with your thumb and push
upward to open it.
2. Insert the batteries, aligning the positive and negative terminals with
the markings inside the compartment.
3. Close the battery cover securely.
Note: Use high-performance AA alkaline batteries.
1 2
2AA Batteries
3 4
02
Whisk Installation
If you notice significant vibration during use, try removing the whisk,
rotating it 180°, and reinstalling it.
1. Submerge the whisk head into the liquid.
2. Press the Variable Speed Trigger to start . You can control the speed
by adjusting the trigger's travel.
3. Once operation is complete, release the trigger. Remove the whisk
after the head has completely stopped.
03
Product Usage
Rotate 180°
1
1
2
2
User Manual
Typhur Milk Frother
04
Safety Instruction
Cleaning
What’s in the Box
(x1) (x1)
(x1)
(x1)
(x2)
1. Do not place the product upside down if the whisk is wet to prevent
water from entering the milk frother.
2. Store in a clean, dry area when not in use.
Main Unit Whisk
Metal stand
User Manual
AA Batteries
Submerge the whisk in water and start the frother.
Dishwasher
Water
05
Troubleshooting
If the trigger is unresponsive or the milk frother stops working:
1. Ensure the batteries are high-performance AA alkaline batteries.
2. Confirm the batteries are installed correctly.
3. Check if the batteries have enough power.
4. Check if the liquid is too thick, triggering the safety protection.
If all the above steps are followed and the milk frother still does not work, please
contact us.
Warranty
Full details are stated in Typhur's warranty policy at https://www.typhur.com/warranty
Support
Please contact our Customer Support Team if you have any questions.
1(888) 838-6563(USA)
support@typhur.com
support.typhur.com
Certifications
Model: MF03
Manufacturer: Typhur Inc.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This symbol, affixed to the product or its packaging, indicates that the product
must not be processed with household waste. It must be brought to an electric
or electronic waste collection point for recycling and disposal. By ensuring the
appropriate disposal of this product you also help in preventing potentially
negative consequences for the environment and human health. The recycling of
materials helps preserve our natural resources. For further information
regarding the recycling of this product, please contact your municipality, local
waste disposal centre or the store where the product was purchased.
[Typhur Inc. ] hereby declares that the equipment type [MF03] is in compliance with
Directives 2014/30/EU and 2011/65/EU as amended by 2015/863/EU. The full text of
the EU declaration of conformity is available at the following Internet address:
https://explore.typhur.com/ce-declaration!
