Loading ...
Loading ...
Loading ...
9
English
• Crush, cut or entanglement hazard. Do
not use near moving parts, mechanisms or
runningmachinery.
• Do not anchor the tool lanyard to anything on
your body. Anchor to a rigid structure that can
withstand the forces of a droppedtool.
• Make sure the lanyard is properly secure at each
end prior touse.
• Inspect tool and lanyard before each use for
damage and proper function (including fabric
and stitching). Do not use if damaged or not
functioningproperly.
• Do not alter the lanyard attachment point or use in
a manner other than as instructed in thismanual.
• Only attach tool to a lanyard with a locking
carabiner. Do not attach by looping or knotting the
lanyard. Do not use rope orcord.
• Electrical shock hazard. Be sure power is off when
working in high voltage areas. Some lanyards
areconductive.
• Dropped tools will swing on the lanyard, which
could cause injury or loss ofbalance.
• Do not carry the tool by the attachment point, the
battery strap or thelanyard.
• Do not attach more than one tool to eachlanyard.
• Only use appropriate DeWALT brand lanyard‑ready
attachment kit. NEVER modify tools to create
attachmentpoints.
• Only transfer the tool between hands while
properly balanced in a stableorientation.
• Do not attach lanyards to tool in a way that
keeps guards, switches or lock‑offs from
operatingproperly.
• Avoid getting tangled in thelanyard.
• Keep lanyard away from the cutting area of
thetool.
• Do not use lanyards or attachment devices to get
additional leverage from thetool.
• Do not use for personal fallprotection.
• Falling object hazard! Only change batteries,
accessories and attachments where a dropped
object won't cause a hazard below you. Consult
your Authority Having Jurisdiction (AHJ) or site
supervisor for procedures for working atheight.
• Do not use the charger or contractor bag atheight.
• Use multi‑action or screw gate type carabiners. Do
not use single action spring clipcarabiners.
The bracket
16
is for mounting the DeWALT Lanyard Ready
Attachment Point, available at a DeWALT servicecenter.
The lanyard‑ready attachment kit is intended for use by
competent personnel who are trained and knowledgeable
regarding working with tools in and around machinery
and "at height". A lanyard‑ready attachment kit may only
be added to certain models and must be installed by an
authorized servicecenter.
Lanyard Connection (Fig. A)
Optional Accessory
safety Warnings specific for Use At height
WARNING:
• If the tool is dropped for any reason the lanyard
connection must be inspected and properly
serviced prior to reuse. The lanyard connection is
designed to stretch to absorb the shock of a drop.
Any permanent stretch to the connection exposing
the red marked internal coils indicates it has been
compromised and must be serviced prior toreuse.
• Do not use hang hook as lanyard
attachmentpoint.
• Only use batteries that contain the integral battery
strap. Do not use unsecured batteries while the tool
is tethered. Unsecured batteries may detach from
the tool ifdropped.
• Always keep the tool and accessories tethered
when working "at height". (Maximum lanyard
length: 6.5 ft [2m].)
• Use only with lanyards appropriate for this tool
type and rated for at least the weight identified on
the tool lanyard attachment pointlabel.
Wall Mounting
Some DeWALT chargers are designed to be wall mountable
or to sit upright on a table or work surface.If wall mounting,
locate the charger within reach of an electrical outlet, and
away from a corner or other obstructions which may impede
air flow. Use the back of the charger as a template for the
location of the mounting screws on the wall. Mount the
charger securely using drywall screws (purchased separately)
at least 1” (25.4mm) long, with a screw head diameter of
0.28–0.35” (7–9mm), screwed into wood to an optimal
depth leaving approximately 7/32” (5.5 mm) of the screw
exposed. Align the slots on the back of the charger with the
exposed screws and fully engage them in theslots.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
a. Check operation of receptacle by plugging in a lamp
or other appliance;
b. Check to see if receptacle is connected to a light
switch which turns power off when you turn out
thelights;
c. If charging problems persist, take the tool, battery
pack and charger to your local servicecenter.
4. You may charge a partially used pack whenever you
desire with no adverse effect on the batterypack.
Charger Cleaning Instructions
WARNING:Shock hazard. Disconnectthe charger
from the AC outlet before cleaning. Dirt and grease
may be removed from the exterior of the charger using
a cloth or soft non‑metallic brush. Do not use water or
any cleaningsolutions.
Loading ...
Loading ...
Loading ...