Loading ...
Loading ...
Loading ...
16
MAINTENANCE
WARNING: In order to avoid personal injury and the risk of fire and electric shock, turn
off the appliance and remove the mains plug prior to any care and maintenance work.
When servicing, use only identical replacement parts. Use of any other parts could create a hazard or
cause product damage.
Clean-up
When finished using the pressure washer, follow these steps:
1. Turn the pressure cleaner to the OFF(O) position.
2. Turn off the water supply.
3. Before disconnecting high-pressure hose connection, point the gun in a safe direction and
discharge the high-pressure water.
4. Disconnect high-pressure hose from the pressure cleaner and gun.
5. Disconnect garden hose from the pressure cleaner.
6. Remove quick coupler fitting from garden hose and attach to the nipple portion of the fitting
installed on the pressure cleaner for storage.
7. Remove excess water from the pump by tipping the unit on both sides to drain any remaining
water from inlet and outlet fittings.
8. Remove water intake filter and flush with water to remove dirt or debris, then remount the filter
back.
9. Drain detergent reservoir and flush with running water.
10. Wipe away any remaining water on all parts and fittings Engage the gun safety lock.
11. Store the pressure cleaner,parts,and accessories in an area with a temperature above 0° C (32°F).
Storage
Winterizing and Long-Term Storage
Follow all of the above shut-down procedures. adding the following steps:
● After disconnecting the water supply, and before disconnecting the high-pressure hose, turn the
pressure cleaner on for 2-3 seconds, until any remaining water in the pump exits TURN UNIT
OFF IMMEDIATELY. Continued use of the pressure cleaner without water supply attached
will cause severe damage to the unit!
● Always store the pressure cleaner, parts, and accessories in an area with a temperature above
32°F.
NOTE: Failure to comply with these storage instructions will result in damage to the pump
assembly.
Maintenance
● This pressure cleaner is supplied with a closed lubrication system, so no addition of oil is
needed.
● Check all hoses and accessories for damage prior to use.
● Check the inlet filter periodically for deposits. Clean this filter regularly for maximum
performance.
Loading ...
Loading ...
Loading ...