
Digital tyre inflator 0.5m Hose witH twin
PusH-on CHuCk, Digital tyre inflator
2.7m Hose witH CliP-on ConneCtor
Model no: sa374, sa375
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9 Disconnectthetyreinatorfromtheairsupplybeforechangingaccessories,servicingorperforminganymaintenance.
9 Keepchildrenandunauthorisedpersonsawayfromtheworkarea.
9 KeepthegaugeLCDscreenandtyreinatorclean.
9 ReplacedamagedpartswithgenuineSealeyparts.Unauthorisedpartsmaybedangerousandwillinvalidatethewarranty.
9 Checkconditionofthebatteriesregularly.
9 Checktyrepressureswhentheyarecold.
8 Do notdirectthetyreinatoroutletatyourselforothersincludinganimals.
8 Do notcarrythetyreinatorbythehose,ortugthehosefromtheairsupply.
8 Do notusethetyreinatorforataskwhichitisnotdesignedtoperform.
8 Do notoperatethetyreinatorwhenyouaretiredorundertheinuenceofintoxicatingmedicines,drugsoralcohol.
8 Do notoperatethetyreinatorifpartsaremissingortheLCDisdamaged,thiscouldbedangerous.
8 Do notdroporbumpthetyreinator.
8 Do notgetthetyreinatorwet.
8 Do notoperatenearapplianceswithstrongmagneticelds,corrosivegassesorcorrosiveliquids.
2. introDuCtion
2.1. sa374
die-castaluminiumbodywithlargerubberbumper,backlitLCDdigitaldisplayandbatterylevelindicator.Autopoweroaftereightseconds
andautopowerononcepressureissensed,orairinationstarts.0.5mFlexiblehosettedwith240mmpush-onairconnector.Suppliedwith
aserialnumberedcalibrationcerticate.
2.2. sa375
diecastaluminiumbodywithlargerubberbumper,backlitLCDdigitaldisplayandbatterylevelindicator.Autopoweroaftereightseconds
andautopowerononcepressureissensed,orairinationstarts.2.7mFlexiblehosettedwithclip-onairconnector.Suppliedwithaserial
numberedcalibrationcerticate.
3. sPeCifiCation
model no:.............................................................................sa374 ....................................................................... sa375
Accuracy:................................................................. 25-75psi±2psi........................................................... 25-75psi±2psi
BatteryRunTime:...................................................................80hrs......................................................................... 80hrs
Battery:.............................................................. 2xAAA(supplied)..................................................... 2xAAA(supplied)
InletSize:........................................................................... 1/4”BSP.....................................................................1/4”BSP
MaximumAirSupply:..............................................13.8bar(200psi)......................................................... 13.8bar(200psi)
nettWeight:..........................................................................1.15kg....................................................................... 1.15kg
PressureUnits:............................................................ bar,psi,kPa.............................................................. bar,psi,kPa
Range:................................................................ 0-12bar(0-174psi)......................................................0-12bar(0-174psi)
4. oPeration
4.1. to reaD Pressure
4.1.1. Placehold-onchucksquarelyandrmlyontotyrevalve,beforeeachpressurereadingfullydepressleverandrelease.
4.1.2. Checkpressuregauge,thedigitaldisplaywillactivateoncethetyrepressureissensed.Ifnopressureissensedthedisplaywillnot
turnon,pleasepresstriggertoaddairintotyre,beforereadingpressure.
4.2. to inflate
4.2.1. Placechucksquarelyandrmlyontothevalve.Fullydepressleverforanappropriateperiodthenreleaselevertodisplay
pressure.Checkpressuregaugeandrepeatprocedureuntilcorrectpressurelevelisachieved.
4.3. to Deflate
4.3.1. Depressleverhalfway(untilaircanbeheardescaping)foranappropriateperiod,fullydepresslevermomentarilythenreleaseto
displaynewpressure.Checkpressuregaugeandrepeatprocedureuntilcorrectpressurelevelisachieved.
SA374SA375Issue110/06/19
Original Language Version
©JackSealeyLimited
Referto
instructions

5. maintenanCe
5.1. CHanging tHe batteries
5.1.1. Thisinatorrequires2xAAAbatteries.Ifthevoltageofthebatteriesfallbelow2.6volts,
thebatteryiconwillashcontinuouslyuntilitshutsdown.Ifthevoltageofthebatteriesfall
below2.5volts,thelow“LO”batteryiconappearswhilethepowerisonandthenshutsdown
automatically.Thebatteriesmustbechangedifthebatteryiconashes.
5.1.2. Unscrewthebatterycap(g.1).
5.1.3. Slidethebatteriesintotheinaterwiththepositiveendfacingoutoftheinater(g.1).
5.1.4. ReplacethebatterycapcarefullyandDo notovertighten(g.1).
5.2. sCale CHange
5.2.1. Pressandholdthescalechangebuttonto
activatethedisplay,oncethedisplayis
activatedpressandholdthebutton
for2secondstochangethedisplay
scale(g.2).
6. troublesHooting
Thisairlinegaugehasbeenengineeredtogiveyearsoftrouble-freeservice.Majorfaultsare
oftendueeithertoprolongedmistreatmentortoadirty,excessivelywetairsupply.Thefollowingguidewillenabletheoperatoror
serviceengineertodiagnoseandcureanyproblemswhichmayarise.
6.1. air leaks from tyre ConneCtor
Thesealsshouldbereplacedwhenitbecomesdiculttoobtainaneasy,positiveairtightsealonatyrevalve.Newchucksare
availablefromSealeyStockists.
6.2. DamageD flexible Hose (gauge to tyre ConneCtor)
Thecompletehoseassemblyshouldbereplacedimmediatelyifanysignofdeepchang,bulgingorcrackingappears.Ensure
thatthecentredlterinthegaugeoutletportdoesnotbecomedislodgedduringreplacement.
6.3. slow tyre inflation
Causedby:Lowsupplypressure,orblockedinletlter,ordamagedvalvemechanism.
g.1
g.2
reference pressure psi 29.0 58.0 87.0 116.0 145 174
allowable tolerances +/-1.2psi +/-1.2psi +/-2.3psi +/-2.3psi +/-3.6psi +/-3.6psi
indicated pressure psi
Calibration CertifiCate
tyre inflater
Model no: sa374, sa375
Thistyreinaterhasbeencalibratedinitsnormalworkingpositionontestequipmentwithanaccuracythatistraceabletostandards
accordingto:EN12645:2014.(Tyrepressuremeasuringinstruments,devicesforinspectionofpressureand/orInation/deationoftyresfor
motorvehicles.)
PhysicalLaboratoryReferenceNumberL0134,ReferencePressureIndicatorKeyenceAP-C33,SerialNumberE031759.
serial no.
Date:
test results
sealey group, kempson way, suffolk business Park, bury st edmunds, suffolk. iP32 7ar
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
environment ProteCtion
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
accordingtolocalregulations.
weee regulations
DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment
(WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid
wasteauthorityforrecyclinginformation.
battery removal see seCtion 5
UndertheWasteBatteriesandAccumulatorsRegulations2009,JackSealeyLtdarerequiredtoinformpotentialpurchasersofproducts
containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpak’sregisteredcompliancescheme.Jack
SealeyLtdBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.
note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponentpartswithoutprior
notice.
important:NoLiabilityisacceptedforincorrectuseofthisproduct.
warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
SA374SA375Issue110/06/19
Original Language Version
©JackSealeyLimited
