Tripp Lite BHDBT3-TR NEW series HDBaseT 3.0 Transmitter/Receiver, HDMI 4K 60 Hz 444, RS-232, IR Control, Up to 328 ft. 100 m, TAA

Owner's Manual HDBaseT 3.0 Transmitter/Receiver BHDBT3-TR, BHDBT3-TRX2 - Page 3

For BHDBT3-TR NEW.

PDF File Manual, 80 pages, Read Online | Download pdf file

BHDBT3-TR NEW photo
Loading ...
Loading ...
3
Important Safety Instructions
This product is for indoor use only.
Read all of these instructions. Save them for future reference.
Follow all warnings and instructions marked on the device.
Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls,
serious damage will result.
Do not use the device near water.
Do not place the device near, or over, radiators or heat registers.
The device cabinet is provided with slots and openings to allow for adequate ventilation. To
ensure reliable operation, and to protect against overheating, these openings must never
be blocked or covered.
The device should never be placed on a soft surface (bed, sofa, rug, etc.), as this will block its
ventilation openings. Likewise, the device should not be placed in a built-in enclosure unless
adequate ventilation has been provided.
Never spill liquid of any kind on the device.
Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
The device should be operated from the type of power source indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local power
company.
To prevent damage to your installation, it is important that all devices are properly
grounded.
Do not allow anything to rest on the power cord or cables. Route the power cord and cables
so that they cannot be stepped on or tripped over.
Position system cables and power cables carefully; make sure nothing rests on any cables.
Never push objects of any kind into or through cabinet slots. They may touch dangerous
voltage points or cause parts to short out, resulting in a risk of fire or electrical shock.
Do not attempt to service the device yourself. Refer all servicing to qualified service
personnel.
If the following conditions occur, unplug the device from the wall outlet and bring it to
qualified service personnel for repair.
o The power cord or plug has become damaged or frayed.
o Liquid has been spilled into the device.
o The device has been exposed to rain or water.
o The device has been dropped, or the cabinet has been damaged.
o The device exhibits a distinct change in performance, indicating a need for service.
o The device does not operate normally when the operating instructions are followed.
Only adjust those controls that are covered in the operating instructions. Improper
adjustment of other controls may result in damage that will require extensive work by a
qualified technician to repair.
Loading ...
Loading ...
Loading ...