Loading ...
Loading ...
Loading ...
MAINTENANCE OF WASHABLE FILTERS
1. Remove the dirt container by pressing
the dirt cup release button (11) and
lifting up on the handle
2. Remove the lid of the dirt container by
turning anti-clockwise to unlock the tabs
3. Lift the dirt container filter set (23) out
from above the cyclonic separator.
Once the filters have been removed and
separated (A and B as per the picture
on the right), gently wash them in
luke-warm water. A mild detergent may
be used. Ensure that the filters are well
rinsed and completely dry before
reassembling and placing them back
into the machine
4. Remove the pre-motor filter (24) from its
housing and gently wash it in luke-warm
water with a mild detergent. Ensure that
the filter is well rinsed and completely
dry before placing it back into the
machine
Never operate your FORCE 10 vacuum without
all the filters in place. Doing so may damage the
motor and void the guarantee.
!
CAUTION:
7
Never operate your FORCE 10 vacuum
with damp or wet filters.
!
WARNING:
For maximum cleaning performance, check the
filters often and clean or replace if necessary.
!
TIP:
Do not use any appliances such as electric
hair dryers, to dry the filters. Filters may only
be AIR DRIED.
!
WARNING:
2.
1.
3.
A
B
4.
Loading ...
Loading ...
Loading ...