Loading ...
Loading ...
Loading ...
9
MAINTENANCE AND CARE
CLEANING THE POST-MOTOR
MICROPARTICLE FILTER
THE POST-MOTOR FILTER ASSISTS IN THE
FILTRATION PROCESS TO RETURN CLEANER
AIR INTO THE ROOM
1. Unplug the vacuum from the electrical
outlet
2. Remove the filter door (located at
the back of the vacuum) by
pressing the tab and lifting the filter
door upwards and away from the
vacuum. Take care when removing the
filter door
3. Remove the post-motor filter from
the vacuum by grasping the tab and
pulling gently outwards
4. The post-motor filter can be hand
washed in cold water with a mild
detergent. Rinse well and air dry
thoroughly before placing back
into the vacuum
5. Replace the filter door by placing
the two tabs on the top of the filter door
into the notches on the top of the
post-motor filter compartment and push
down into the vacuum to lock into place.
Ensure that the tabs are properly
inserted into the housing BEFORE
PRESSING DOWN
Never operate your FORCE 10 vacuum
with damp or wet filters, or without all
filters in place.
!
WARNING:
This product is intended for household use only
and not for commercial or industrial use.
Vacuuming of dust from products like plaster,
concrete or ashes will damage the motor and
void the guarantee.
NOTICE:
2.
For maximum cleaning performance check the
filters often and clean or replace them regularly.
!
TIP:
3.
Loading ...
Loading ...
Loading ...