Loading ...
Loading ...
Loading ...
To avoid injury, turn the vacuum OFF and
unplug the cord from the wall when not in use.
!
WARNING:
Hair, string and small objects can block the
hose and tools. Check them occasionally for
obstructions.
TIP:
MAINTENANCE AND CARE
To reduce the risk of injury from moving parts
and/or electrical shock, turn the Power Switch
OFF and disconnect the plug from the electrical
outlet before performing maintenance checks.
!
WARNING:
EMPTYING THE DIRT CONTAINER
Empty the dirt container as soon as the dirt
reaches the “FULL” line on the sides of the
dirt container.
1. Unplug the vacuum from the electrical
outlet
2. Remove the hose by pressing the
securing clips inward and pulling the
hose connector out from the suction
inlet. Set the hose aside
3. Press the dirt container release button (11)
and lift up to remove the dirt container
4. Choose an emptying method (method
#2 is recommended for allergy sufferers).
Method #1 - Hold the dirt container
over a rubbish bin and push the
emptying button to open the bottom.
Close the bottom after the dirt empties.
Method #2 - Place a plastic bag over
the bottom of the dirt container. Push the
emptying button through the plastic bag
to open the bottom. After the dust
settles, close the bottom and remove the
plastic bag to discard
5. Replace the dirt container by sliding it
back into the vacuum from the top. Then
push down gently on the dirt container
until it clicks back into place
TO MAINTAIN MAXIMUM
PERFORMANCE FROM YOUR
FORCE 10 VACUUM, PERFORM
THESE SIMPLE MAINTENANCE
CHECKS:
2.
3.
4.
5.
6
Loading ...
Loading ...
Loading ...