Loading ...
Loading ...
Loading ...
GeoVision Inc. 7 7/14/2023
Update
To update the speaker firmware, follow the steps below:
1. Select a speaker in the list.
2. Specify the IP address of the PC used to upgrade firmware ( >
Update IP). See Update IP under [NormParam] as described above.
3. Click Update to remove the speaker from the working mode, and then click
Query. The Run Mode of the speaker in the list changes from RUN to BOOT.
4. Run GV-IP Speaker Update Kits.
A、 Click Open File to locate a firmware file.
B、 Click Start to search for speakers in BOOT mode.
C、 Select a speaker in the list
D、 Click Start to start firmware upgrade.
Note: On the GV-IP Speaker Update Kits user interface:
1. filterUnmatchedType: When the option is enabled, only search for speakers
with the same firmware versions.
2. markHighVer: When the option is enabled, it will detect new firmware version
available, and display the message “Higher version”.
Working
Change the Run Mode of the speaker from Boot to RUN.
Reset
Restart the speaker.
Enable this option to use the broadcasting method to set up a speaker when the
speaker and the computer used for configure it are on different network segments.
Loading ...