Loading ...
Loading ...
Loading ...
GeoVision Inc. 6 7/14/2023
Setting
When you click the Setting button, you will be prompted to enter Use and Password.
By default, the Use ID is admin and the Password is admin123.
[NormParam]
◼ DevID: The Device ID.
◼ Dev Network Param Setting: Configure a fixed IP address for the speaker. Or
select DHCP to have an IP address assigned by a DHCP server within the
network.
◼ Update IP: The option is used to update the firmware of the speaker. Enter the IP
address of the PC used to update the firmware.
◼ Confirm Verify: Enable to check any IP conflicts.
◼ ReVal: Return factory default settings.
◼
[ONVIFParam]
By default, the Use ID is admin and the Password is admin123. You can change
both ID and Password.
[SipParam]
Connect a GV-IP Speaker to the SIP server. Use the SIP server to call the speaker
and speak into the microphone installed on the SIP server in order to broadcast via
the speaker.
◼ RegIp: Type the IP address of the SIP server.
◼ RegPort: The port of the SIP server is 5060 by default.
◼ Use: Type the ID number of the speaker as assigned on the SIP server.
◼ Password: Type the password of the speaker as assigned on the SIP server.
[Setting]
◼ CompatProgram: Keep the compatible programs option turned OFF.
◼ 1/PlayPriorityH, 1/PlayPriorityM, 1/PlayPriorityL: Set High, Medium and Low
priorities to the protocols IP, SIP, ONVIF / RTSP. The default order of priority is
IP, SIP, and ONVIF / RTSP.
Pos
Click the button to play a sample video through the speaker.
Loading ...
Loading ...