Loading ...
Loading ...
Loading ...
40
4. For recessed cabinets, insert and place the filler blocks on the microwave
oven below the cabinet screw holes.
NOTE: If filler blocks are not used, case damage may occur from
overtightening screws.
5. Rotate microwave oven up toward upper cabinet.
NOTE: Do not pinch the power supply cord to lift oven by pulling the
power supply cord, and make sure the rear venting assembly easily into
the vent in the wall cutout.
6. Push microwave oven against mounting plate and hold in place.
NOTE: If adjustment is required, rotate microwave oven downward. Using
2 or more people, lift microwave oven off of mounting plate and set aside
on a covered surface. Loosen wall mounting plate screws, adjust wall
mounting plate, and re-tighten screws. Then repeat the steps above.
7. With the microwave oven centered, and with at least one person holding
it in place, insert 2 self-aligning screws through upper cabinet into
microwave oven. Turn screws until there is no gap between upper cabinet
and microwave oven.
Cabinet Front
Cabinet Bottom
Filler Block
Self-Aligning Screw
Microwave Oven Top
Equivalent to
Depth of
Cabinet Recess
Loading ...
Loading ...
Loading ...