Loading ...
Loading ...
Loading ...
21
IMPORTANT: Read the instructions on the Top Cabinet Mounting Template.
1. Determine the type of the cabinet bottom. If it is recessed, cut the edges
of the Top Cabinet Mounting Template to fit in the recessed cabinet
bottom accordingly.
2. Position and tape the Top Cabinet Mounting Template underneath the
top cabinet.
NOTE:
• On some cabinets a small bracket or glue block is used between the
overhang and the underside of the cabinet bottom. Cut the Top
Cabinet Mounting Template to fit around the bracket or glue clock so
that the template will lie flat against the cabinet bottom.
• Adjust the Top Cabinet Mounting Template accordingly if the
microwave oven is being spaced out from the wall due to oversized
cabinet depth.
3. Follow the instructions on the Top Cabinet Mounting Template to drill the
3
/
8
" diameter screw holes labelled A and B.
CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.
4. Follow the instructions on the Top Cabinet Mounting Template to cut out
the 2" diameter power cord hole labelled D. If cabinet bottom material is
metal, use the nylon grommet provided to surround the cutout opening
and protect the power cord from sharp cutout edges.
5. Remove the Top Cabinet Mounting Template.
Recessed
Cabinet
Bottom
Smooth
/Flat
Cabinet
Bottom
Loading ...
Loading ...
Loading ...