Loading ...
01 CHECKING THE
COMPONENTS
Surround Speaker X 2 / Speaker Cable / AC/DC Adapter
/ Power Cord
NOTE
• For more information about the power supply and
power consumption, refer to the label attached to the
product. (Label: Rear of the Main Unit)
• Design and specications are subject to change without
prior notice.
02 CONNECTING THE
SWA-9200S TO A
SOUNDBAR
1. Connect the Surround speaker cables
Use the speaker cables to connect the two surround sound
speakers.
• When connecting the speaker cable, connect the core
wire to the speaker.
• Insert the wire fully, taking care not to insert beyond
the wire insulation.
Insert the wire fully.
+ : Red
- : Black
• When connecting the speaker cables to the surround
speakers, follow these steps:
– Insert the red and black colored ends of each
speaker cable into the red and black jacks of the
appropriate speaker.
– The labels are on the backs of the speakers.
Audio cable
– The length of the speaker audio cable: 6 m
2. Turn on the Surround speakers
Plug the Surround speakers’ power cord into an electrical
outlet to turn on the Surround speakers. The LINK LED
indicator(blue LED) on the rear of left surround speaker will
blink quickly.
If the LINK LED does not blink, please see step 6.
LINK STANDBY
ID SET
Rear of Left
Surround
LINK STANDBY
ID SET
LINK STANDBY
ID SET
Rear of Left Surround
"Blue
blinking"
3. Turn off the Soundbar
If the Soundbar is turned on, please turn off the Soundbar
by pressing the (Power) button on the Soundbar or
remote control.
SOUND
MODE
PAIR
BYE
OR
Red BlinksX3
• The image of the Soundbar may differ from your
Soundbar, depending on the model.
4. Connect Soundbar and Surround Speakers
Press the Up button on the remote control for more than
5 seconds until the “ID SET” message appears on the
Soundbar’s display. The message will disappear shortly.
(If your Soundbar does not have a display window and only
LED indicators, please refer to the LED information below.)
• After the ID SET process is successful, the Soundbar will
turn on automatically.
OR
SOUND
MODE
PAIR
5 sec
ID SET
Red → Green →
Blue Blinks
• The image of the Soundbar may differ from your
Soundbar, depending on the model.
5. Check the connection complete
The LINK LED stops blinking and changes to solid blue
when the Soundbar and surround speakers are successfully
linked.
Please turn off the Soundbar and turn it back on. Conrm
that the LINK LED is blue.
(It may take a minute depending on the environment.)
LINK STANDBY
ID SET
LINK STANDBY
ID SET
Rear of Left Surround
“Blue is On”
• If the LINK LED does not turn to solid blue in a minute,
please repeat from step 2 through 5 referring to step 6
(LED indicator’s status).
6. LED Indicator’s status
LINK (Blue) On : Connected with the Soundbar.
LINK (Blue) Blinking fast (at an interval of around
0.5 second) : Surround speakers are in ID SET mode.
• Check if the Soundbar is turned on and in ID SET mode.
• Repeat steps 3 through 5.
LINK (Blue) Blinking slow (at an interval of around
1 second) : Previously connected to a Soundbar but
cannot currently nd it.
• Check if the Soundbar is turned on.
• If the LINK LED keeps blinking slowly even when the
Soundbar is turned on,
1. Press the ID SET button on the rear of the left
surround for more than 5 seconds until the LINK
LED starts blinking fast in blue.
LINK STANDBY
ID SET
LINK STANDBY
ID SET
5 sec
Rear of Left Surround
2. Repeat steps 3 through 5.
STANDBY (Red) On : When the Soundbar turns off or
connection has failed.
• Follow the instructions for “Link (Blue) Blinking slow
(at an interval of around 1 second)” above.
Others : Errors
• Contact a Samsung Service Centre.
03 TROUBLE SHOOTING
There is no sound from Surround Speakers
• If the Surround speakers are successfully paired and
connected to a Soundbar, the LINK LED indicator on
the rear of the Left Surround is on and solid blue.
Please reconnect the Surround speakers to your
Soundbar referring to 02-6, LED Indicator’s status.
• Other devices sending radio frequency signals in
proximity may interrupt the connection. Please keep
your speaker away from such devices.
• The content you are playing may have no surround
track but only stereo. Please change the sound mode
to Surround by pressing SOUND MODE button on the
remote control.
There is sound jitter, delays, noise or dropout from the
sound of Surround Speakers.
• There may be sound jitter or delays when the Surround
Speakers are far from the Soundbar. Please place
them near the Soundbar.
• There may be sound jitter or delays when the
Soundbar is near an electrical device that can cause
radio interference. Please place the Soundbar far from
such devices that can cause radio interference
(e.g. wireless router).
• Please change the TV network connection status from
wireless to wired.
The volume of Surround Speakers is too low
• Please increase the rear level referring to the manual
of your Soundbar.
(You can download the manual of your Soundbar from
www.samsung.com/support)
04 MOUNTING ON A WALL
LINK STANDBY
8.2 mm
4.2 mm
7.9 mm
4.6 mm
4.0 mm
• Be sure the wall is stable. If the wall is weak, reinforce
it before installation.
• Take care not to install the speakers sideways or upside
down.
• Samsung Electronics is not liable for any damage to the
product due to improper installation.
• Wall mounts aren’t sold by Samsung Electronics.
05 COMPATIBLE MODELS
• Compatible with select Samsung Soundbar. Please visit
the Soundbar product page at www.samsung.com/
support for more information.
• Compatible model list is subject to change without
further notice.
06 OPEN SOURCE LICENSE
NOTICE
To send inquiries and requests for questions regarding
open sources, contact Samsung Open Source
(http://opensource.samsung.com)
07 SPECIFICATIONS AND
GUIDE
Specications
Subwoofer Name
SWA-9200S (LEFT/RIGHT)
Weight
1.7 kg
Dimensions (W x H x D)
105.0 x 152.8 x 109.0 mm
Operating Temperature
Range
10 ℃ to 40 ℃
Operating Humidity Range
10 % ~ 80 %,
non-condensing
AMPLIFIER
Rated Output power
60 W x 2
NOTE
• Samsung Electronics Co., Ltd reserves the right to
change the specications without notice.
• Weight and dimensions are approximate.
• For India Only
“This product is RoHS compliant”