Loading ...
Loading ...
Loading ...
20
SETTING OVEN CONTROLS
Temperature display (Fahrenheit/Celsius)
The electronic oven control is set to operate in
Fahrenheit (°F) at the factory. The oven may be
programmed for any temperature from 170°F to
550°F (77°C to 288°C).
To change the temperature to Celsius (°C) or from
°C to °F:
1. Press Broil until F or C appears in the display.
2. Press or to change °F to °C or °C to
°F. To accept the change, wait 6 seconds until
the oven control provides an acceptance beep.
3. The display will return to the time of day.
Changing between continuous bake set-
ting or 12-hour energy saving feature
The oven control has a built-in 12-hour energy sav-
ing feature that will shut o the oven if the oven is
left on for more than 12 hours. The oven control can
be programmed to override this feature for contin-
uous baking.
To change the continuous bake setting:
1. Press and hold timer on-o for 6 seconds until
a tone sounds. — — hr will appear in the display
for continuous cooking. The current time of day
will return to the display.
2. To cancel the continuous bake setting, press
timer on-o and hold for 6 seconds until a tone
sounds. 12 hr will appear in display indicating
that the control has returned to the 12-hour
energy saving feature.
IMPORTANT
Changing to continuous bake or 12 hour mode
does not change how the cooktop controls oper-
ate.
Setting the minute timer (some models)
1. Press Timer on-o .
2. Press to increase time in one-minute
increments. Press and hold to increase
time in 10-minute increments. The timer can be
set for any amount of time from 1 minute to 11
hours and 59 minutes.
NOTE
The minute timer will not start or stop the cook-
ing process. The minute timer can be used alone
or while using any of the other oven features. If
another feature is active when the minute timer is
active, the minute timer will show in the display.
To view information about other active features,
press the key for that feature.
NOTE
If is pressed fi rst, the timer will advance to 11
hours and 59 minutes
When the set time ends, the timer will beep three
times and will continue to beep three times every
minute until Timer on-o is pressed.
To change the timer while it is in use:
While the timer is active and shows in the display,
press and hold or to increase or de-
crease the time remaining.
To cancel the minute timer before the set time has
run out:
Press Timer on-o once
Loading ...
Loading ...
Loading ...