Loading ...
Loading ...
3
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging im-
properly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
FOR CRIMPER
• Use tool only as directed. Only trained personnel
should operate tool.
•
WARNING
To reduce the risk of arc ash,
electric shock and property
damage, work on deenergized lines when
possible. Tool is not insulated. Should work
on energized lines be required, ensure all proper
precautions, including those contained in NFPA
70E, have been taken
rst.
• Use tool only with MILWAUKEE crimping jaw
49-16-U000 or 49-16-U111, "U" dies, and connectors
for which they are rated. Jaws, dies, and connec-
tors must be used in an APPROVED COMBINA-
TION to achieve a successful operation. Improper
combinations can result in a faulty crimp. Electric shock,
re, explosion, and property damage could occur.
• Do not use tool without jaws installed. Fingers
could be injured.
• Keep hands away from jaws while tool is in use.
Fingers could be injured.
•To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool.
• Inspect and discard workpieces with cracks or
wear before use. Materials may crack or shatter.
• Follow installation specications as specied in
Table A or B using an Approved Combination of
jaws, dies, connectors and cables as indicated.
Other uses may cause damage to the tool, acces-
sories, and workpiece.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
•
Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS
Cat. No. ..................................................... 2679-20
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Module/FCC ID ........BGM220S2/QOQ-BGM220S2
Force ............................................................6 Tons
Recommended Ambient
Operating Temperature ......................0°F to 122°F
Crimping Jaws
Cat. No .................................................49-16-U000
Jaw Type .........................M18™ 600 MCM U Style
Crimping Jaw
Max. Crimping Capacity ..........................600 MCM
Cu/350 MCM AI
Cat. No ................................................. 49-16-U111
Jaw Type .........................M18™ 750 MCM U Style
Crimping Jaw
Max. Crimping Capacity ..........................750 MCM
Cu/750 MCM AI
Cable Cutting Jaws
Cat. No ................................................. 49-16-2780
Jaw Type .........M18™ 750 MCM Cu/1000 MCM AI
Cable Cutting Jaws
Max. Cutting Capacity .............................750 MCM
Cu/1000 MCM AI
Replacement Blades .............. Cat. No. 48-44-0411
FUNCTIONAL DESCRIPTION
1
1. Locking thumb screw
2. Backup release valve
3. Crimping indicator
4. Hanger
5. LEDs
6. ONE-KEY™ indicator
7. Handle
8. Trigger
9. Crimping jaws
10. Die release tabs
11. Retaining pin
2
11
8
9
10
7 5
4
6
3
Loading ...
Loading ...
Loading ...