Loading ...
Loading ...
Loading ...
-
Input the IP address in the browser to access the device.
-
Add the device in client applicaon. Select IP/Domain, and input IP address and other
parameters to access the device.
7.8.2 Set Allowlist
Add the mobile phone number of administrator to the allowlist in order to receive alarm message
from the device.
Steps
1.
Go to allowlist sengs page: Conguraon → Advanced Conguraon → Wireless Dial →
Allowlist .
2.
Check Enable SMS Alarm.
3.
Click
in the allowlist.
1) Input the mobile phone number to receive alarm message.
2) Check Reboot via SMS.
3) Select the certain events, and the mobile phone can receive the alarm message when the
event happens.
4) Click Save.
5) Oponal: Repeat the steps above to set mulple recipients.
Modify the allowlist parameters.
Delete the allowlist that already set.
Send Test SMS Send a message to the mobile phone for test.
4.
Click Save.
7.9 Wi-Fi
Connect the device to wireless network by seîž«ng Wi-Fi parameters.
Note
This funcon is only supported by certain device models.
7.9.1 Connect Device to Wi-Fi
Before You Start
Refer to the user manual of wireless router or AP to set SSID, key, and other parameters.
Steps
1.
Go to TCP/IP sengs page: Conguraon → Network → Basic Conguraon → TCP/IP .
2.
Select Wlan to set the parameters. Refer to TCP/IP for detailed conguraon.
Network Camera User Manual
60
Loading ...
Loading ...
Loading ...