Loading ...
Loading ...
Loading ...
Note
●
For device that supports face capture, you need to enable the funcon in VCA Resource. Refer to
Allocate VCA Resource for details.
●
Face capture is only supported by certain models.
10.2.1 Set Face Capture
The face that appears in the congured area can be captured.
Before You Start
To enable the funcon, go to VCA Resource and select Face Capture.
Steps
1.
Go to Conguraon → Face Capture .
2.
For shield region sengs, refer to Set Shield Region .
3.
Select Rule and check Rule.
4.
Input the min. pupil distance in the text eld, or click to draw the min. pupil distance.
Min. Pupil Distance
The min. pupil distance refers to the minimum area between two pupils, and it is basic for the
device to recognize a face.
5.
Input the max. pupil distance in the text eld, or click to draw the max. pupil distance.
6.
Click to draw the detecon area you want the face capture to take eect. Draw area by le-
clicking end-points in the live view window, and right-clicking to nish the area drawing. It is
recommended that the drawn area occupies 1/2 to 2/3 of the live view image.
7.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
8.
Click Save.
9.
For overlay and capture sengs, refer to Overlay and Capture . For advanced parameters
sengs, refer to Face Capture Algorithms Parameters .
Result
You can view and download captured face images in Picture. Refer to
View and Download Picture
for details.
10.2.2 Overlay and Capture
Choose to congure capture parameters and the informaon you want to display on stream and
picture.
Display VCA info. on Stream
Display smart informaon on stream, including the target and rules informaon.
Network Camera User Manual
88
Loading ...
Loading ...
Loading ...