Loading ...
Loading ...
Loading ...
Detecon
Target
Human and vehicle are available. If the detecon target is not selected, all the
detected targets will be reported, including the human and vehicle.
Target
Validity
If you set a higher validity, the required target features should be more
obvious, and the alarm accuracy would be higher. The target with less obvious
features would be missing.
Figure 6-3 Set Rule
5.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.
For the arming schedule seîž«ngs, refer to
Set Arming Schedule . For the linkage method seîž«ngs,
refer to Linkage Method Seîž«ngs .
7.
Click Save.
6.2.7 Set Line Crossing Detecon
It is used to detect objects crossing a pre-dened virtual line. If it occurs, the device can take
linkage acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Line Crossing Detecon .
2.
Check Enable.
3.
Select one Line and set the size lter. For the size lter sengs, refer to Set Size Filter .
4.
Click Draw Area and a line with an arrow appears in the live video. Drag the line to the locaon
on the live video as desired.
5.
Set rules.
Direcon It stands for the direcon from which the object goes across the line.
A<->B: The object going across the line from both direcons can be detected
and alarms are triggered.
A->B: Only the object crossing the congured line from the A side to the B side
can be detected.
Network Camera User Manual
45
Loading ...
Loading ...
Loading ...