Bedienungsanleitung - Page 13

For 1.445-340.0.

Loading ...
Loading ...
Loading ...
English 13
b Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c When battery pack is not in use, keep it away
from other metal objects, like paperclips,
coins, keys, nails, screws or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
d Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medi-
cal help. Liquid ejected from the battery may
cause irritation or burns.
e Do not use a battery pack or tool that is dam-
aged or modified. Damaged of modified batter-
ies may exhibit unpredictable behaviour resulting
in fire, explosion or risk of injury.
f Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
g Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the bat-
tery and increase the risk of fire.
6 Service
a Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
b Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
Additional safety instructions
WARNING ● Serious injuries due to negli-
gence through familiarity with the device due to frequent
use. ● Keep the work area clear of bystanders, children
and animals while cutting. ● Risk of injury if a branch un-
der tension snaps back when cutting. ● A sharp cutting
edge reduces the risk of injury and increases the cutting
performance. Keep the cutting edge sharp and clean,
follow the instructions for oiling and replacement of ac-
cessory parts. ● Check the device for damage before
each use and after any impacts. Damaged parts must
be repaired or replaced by the authorised Customer
Service department. ● Immediately stop the device and
check for damage or identify the cause of the vibration
if the device has been dropped, hit or vibrates abnor-
mally. Have damage repaired by the authorised Cus-
tomer Service or replace the device. ● Danger of injury
and damage to the device if unqualified personnel carry
out maintenance and care work. Service and mainte-
nance work on this device requires special protective
measures and knowledge and may only be carried out
by suitably qualified and specially trained specialist per-
sonnel. ● Risk of injury due to operating error. Keep
these operating instructions, read them regularly, and
use them for instructing other people how to use the de-
vice. Provide these operating instructions with the de-
vice when you lend or transfer the device.
CAUTION ● Slippery handles and gripping
surfaces prevent safe operation and control of the de-
vice in unexpected situations. Keep handles and grip-
ping surfaces dry, clean, and free from oil and grease.
● Before starting work, the operator must check that all
safety devices are attached correctly and are fully func-
tional.
Additional Battery Safety Warnings
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse the tool,
battery back, or charger in fluid or allow fluid to flow in-
side them. Corrosive or conductive fluids, such as sea-
water, certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short cir-
cuit.
Charge the battery pack in a location where the am-
bient temperature is between 10°C and 38°C.
Store the battery pack in a location where the ambi-
ent temperature is between 0°C and 40°C.
Use the battery pack in a location where the ambient
temperature is between 0°C and 40°C.
Safe servicing and care
WARNING ● Turn off the motor, make sure all
moving parts have fully stopped and remove the battery
pack before inspecting, cleaning, or servicing the de-
vice. ● Service and maintenance work on this device re-
quire special care and knowledge and may only be
performed by appropriately qualified personnel. Take
the device to an authorized Customer Service depart-
ment for maintenance. ● Ensure that the device is in a
safe condition by regularly checking that all bolts, nuts
and screws are screwed tight.
CAUTION ● Only use accessories and spare
parts and attachments that are approved by the manu-
facturer. Only original spare parts, original accessories
and original attachments ensure fault-free and safe op-
eration of the device. ● Injuries and damage to the de-
vice when chemicals damage, soften or destroy plastic
parts. Avoid contact of plastic parts with brake fluid, pet-
rol, petroleum-based products, rust remover, etc.
ATTENTION ● Clean the product with a soft, dry
cloth each time after use. ● Do not use solvents to clean
the plastic parts, as they attack the materials used on
the device. Remove impurities such as dust, oil and lu-
bricants using a clean cloth.
Note ● You may only perform the adjustments and re-
pairs described in these operating instructions. Contact
your authorised Customer Service department for other
repairs. ● In order to ensure a long and reliable service
life of the device, you should carry out the maintenance
measures described in the operating instructions on a
regular basis.
Safe transport and storage
WARNING ● Switch the device off, allow it to
cool down and remove the battery pack before storage
or transportation.
CAUTION ● Risk of injury and damage to the
device. Secure the device against movement or falling
down during transport.
ATTENTION ● Remove all foreign bodies from the
device before storage or transportation. ● Clean the
product with a soft, dry cloth each time after use. ● Store
the device in a dry, well ventilated location out of the
reach of children. Keep the device away from corrosive
substances such as garden chemicals. ● Do not store
the device outdoors.
Loading ...
Loading ...
Loading ...