Loading ...
Loading ...
Loading ...
6. Secure the camera to the cover of the wall mount
with three PM4 × 13 screws and three M4 screws.
PM4 × 13 screw
M4 screw
Figure 2-10 Secure Camera to Wall Mount Cover
7. Route the cables through the cable hole of the wall
mount and connect the cables.
8. Insert one end of the wall mount cover diagonally
into the wall mount body, and then snap the other
end of the cover upward on the body.
Main Body
Step 2
Step 1
Cover
Figure 2-11 Secure Cover to Body
9. Lock the cover to the body with one PA3 × 8 screw.
Figure 2-12 Lock Cover to Body
10. Repeat steps 4 to 5 of 2.2.1 Ceiling/Wall Mounting
to adjust the angle and finish the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting
Before you start:
The installation of ceiling mounting and wall mounting
are similar. Following takes wall mounting as an
example.
Steps:
1. Refer to steps 1 to 4 of 2.2.1 Ceiling/Wall Mounting
to install the camera on the wall.
Loading ...
Loading ...
Loading ...