Loading ...
Loading ...
Loading ...
28
Safety
Pr
ecautions
Installa
tion
Requirements
Installa
tion
Instructions
2. The molded end of the dr
ain hose will fit
5/8
" (1.6 cm),
3/
4
" (1.9 cm) or 1"
(2.5 cm) diameter c
onnections on an air gap, waste tee or disposal. Cut
on the marked line as required for your installation.
1"
3/4"
5/8"
1”
(2.5 cm)
3
/
4
”
(1.9 cm)
5
/
8
”
(1.6 cm)
a a
a
Cutting
Lines
NOTE:
Use
5/8
" or
7/8
" inside diamet
er hose and a c
oupler to connect the
two hose ends. Secure the connection with hose clamps if an extension
is required.
ab a
a Hose Clamp
b
Coupler
3. Secur
e the drain hose to the air gap, waste tee or garbage disposal
with clamps.
Option 1 – (Garbage Disposal - With Air Gap):
1. Remove the knockout drain plug from the disposal inlet. Using a
screwdriver and hammer, firmly tap the plug. The plug will separate
and fall into the disposal.
a
a Disposal Inlet
2. R
emo
ve the drain plug from the disposal.
a
a
Disposal Drain Plug
IMPORT
ANT: If you need to cut the drain hose to fit the diameter of
the connection, cut only the rubber end of the hose, as shown earlier in
this section (do not cut into the ridged section).
3. Using a screw-type clamp*, attach the drain hose to the air gap. Cut
the rubber end of the hose, as needed.
Loading ...
Loading ...
Loading ...