Loading ...
Loading ...
Loading ...
7. 48A and 54A Mower Decks Only: Move mower deck forward to
remove front draft link (I) from the mower deck brackets (J).
8. Rotate the height-of-cut dial (A) in counterclockwise direction to
the highest range in the index mark (B) to lock deck in raise
position.
9. Rotate front caster wheels to maximize clearance.
10. Slide mower out from under the machine.
● Do not operate the machine without the mower deck, Machine
may become unstable without the mower deck attached. Move
machine only by hand. (see moving machine by hand in
operating section.)
GH8XT3T,00008DA-19-08JUL22
Installing Mower Deck (42A)
1. Park machine safely. (See Parking Safely in the Safety section.)
2. Allow engine and mufer to cool completely.
CAUTION: Avoid injury! Rotating blades are dangerous.
Before adjusting or servicing mower:
● Disconnect spark plug wires or battery negative (-) cable
to prevent engine from starting accidentally.
● Always wear gloves when handling mower blades or
working near blades.
3. Rotated the height-of-cut dial counterclockwise direction to lock in
raise position.
4. Remove belt from the mower right-hand spindle sheave to allow
more slack for installation of the belt onto clutch.
5. Slide mower deck under machine.
APY69519—UN—08MAR22
6. Rotate the height-of-cut dial (A) clockwise direction to the lowest
range in index mark (B) to lock deck in lowered position.
GX536025—UN—25APR22
7. Lift the front end of the foot plate (A) and remove the foot plate
from the slots (B).
GXT001925—UN—17JUL15
8. Install pin and spring pin (D) onto each side of the rear mower
bracket.
GXT001926—UN—17JUL15
9. Install front lift arm (E) onto the front deck bracket (G) and secure
with washer and locking pin (F).
CAUTION: Avoid injury! Component is spring-assisted and
under tension. Injury can occur if spring-assisted
component is released suddenly.
Service Mower
38
Loading ...
Loading ...
Loading ...