Loading ...
Loading ...
Loading ...
Unlocking Park Brake
APY536679—UN—07JUN22
To unlock the park brake, move motion control levers (A) inward to
neutral position.
GH8XT3T,00008B4-19-10JUN22
Using Key Switch
APY69525—UN—07MAR22
A—STOP Position
B—LED Light (if equipped)
C—Run Position
D—START Position
A - STOP (off) position - With key in the STOP position, all switched
power is off, and engine should not run.
B - LED light - Turn key from STOP to this position. LED light will be
on.
C - Run (on) position - Turn key from STOP to this position, and all
switched power circuits will be on.
D - START position - Turn key to start position to crank the engine.
Release key after engine has started and it will automatically return to
the on position. The engine continues to run.
GH8XT3T,00008B5-19-09MAY22
Using Mower Engagement Switch
● To Engage Mower - Pull mower engagement knob up.
● To Disengage Mower - Push mower engagement knob down.
MP47322,00F463F-19-15MAR13
Using the Hour Meter
● The hour meter shows the number of hours the engine has run. The
hour meter does not accumulate hours with the engine off when the
key is in the run position. Use the hour meter to determine when
your machine has reached the recommended service intervals.
● Turn the key to STOP position when not using the machine.
● Hour meter cannot be reset.
MP47322,00F4640-19-05JUN15
Using the Motion Control Levers
CAUTION: Avoid injury! Learn the use of the motion control
levers and practice at half throttle until becoming procient
and comfortable with the operation of the machine.
Do not move motion control levers from forward to reverse
or reverse to forward position rapidly. Sudden direction
changes could cause loss of control or damage the
machine.
Before using the machine, become familiar with the motion control
levers and how they respond. It is essential to know how the machine
accelerates, steers, and stops.
The functions of the motion control levers are:
● Dual function neutral position.
● Steering.
● Acceleration.
● Braking.
Start/Shutdown Position
APY536680—UN—27APR22
● Motion control levers must be placed fully outward (A). This position
engages the park brake and allows the operator to start the engine.
● Forward and reverse movement of the motion control levers is
prevented when levers are moved to the start/shutdown position.
● Operator can exit mower with the engine running when the mower
engagement switch is disengaged and the motion control levers are
fully outward.
● Motion control levers must be fully outward to safely enter and exit
the operator’s seat.
Operating
19
Loading ...
Loading ...
Loading ...