Loading ...
Loading ...
Loading ...
Troubleshooting
6
11
Problem Cause Remedy
Pump does not pump water 1. Not enough water in the pump chamber to prime.
2. Strainer may be clogged.
3. Hoses are not tightened.
4. Suction hose may be damaged.
5. Strainer may be too high in the water.
6. The suction hose may not be properly tightened to the
suction port.
7. There may be a kink in the discharge hose.
8. Pump may be damaged.
1. Add more water to the pump chamber.
2. Unclog the strainer.
3. Tighten hoses onto the pump ports.
4. Replace damaged suction hose.
5. Place stariner further down in the water.
6. Properly tighten the suction hose to the suction port.
7. Unkink the discharge hose.
8. Replace damaged pump.
Excessive vibration or noise 1. One or more of the clutch bumpers is missing or worn. 1. Replace the three clutch bumpers with the Clutch
Bumper Kit.
Replacement Parts
7
Component Part Number Description
737-05087 Discharge Hose
737-05086 Suction Hose with Strainer
718-05413 Water Pump
723-0383 Tie Down Strap
734-0973 Wheel
738-0373 Shoulder Bolt (Wheel)
712-04065 Nut (Wheel)
735-04121 Bumper
710-05132 Screw (Bumper)
753-08457 Clutch Bumper Kit (6)
Phone (800) 828-5500 to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are
also available free of charge at www.troybilt.com.
Loading ...
Loading ...
Loading ...