ADJUSTABLE BUMPER STAND
MODEL NO: MK81
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO
SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE
1. SAFETY
9 Keep the work area clean and tidy at all times.
9 Use on a stable, level and dry surface.
9 Tie long hair back when using the tool.
9 Avoid wearing loose clothing when using this tool.
9 Familiarise yourself with the product before use.
8 DO NOT allow unauthorised persons to use the product.
8 DO NOT allow children to use the product.
8 DO NOT use as a climbing frame or anchor point.
2. INTRODUCTION
Stand rotates 90° and locks in place to best suit trim removal,
plastic repairs, sanding, priming or painting. Fitted with
clamps designed to hold the inside of the bumper without
touching the painting surface. Arms adjusts from 115cm
to 165cm to fit bumpers and other panels. Bumper stand
includes foam-cushioned support arms to protect the items
on the stand. Fitted with four castors, two with brakes for
maximum manoeuvrability and safe positioning.
3. SPECIFICATION
Model No: ..............................................................MK81
Minimum Arm Width: ......................................... 1150mm
Maximum Arm Width: ........................................1650mm
4. ASSEMBLY
9 Refer to the attached parts diagram to assemble the product.
9 If any parts are missing or damaged, contact your Sealey
stockist immediately.
Refer to
instruction
manual
MK81 Issue 1 09/11/23
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
REGISTER YOUR
PURCHASE HERE
