Dji POWER 500 User Manual

Loading ...

DJI Power 1000/500 User Manual

a. The open circuit voltage is lower than 30 V.

b. The maximum current of one of the solar panels used is lower than 10 A.

c. If more than one solar panel is used, the total power is lower than 400 W.

• For DJI Power 500, the maximum input power is limited to 300 W when using the SDC

Lite port for solar charging.

• Keep the power station away from direct sunlight when recharging. Overheating can

cause damage to the device.

• Prevent leaves and other objects from covering the surface of the solar panel. Placing

the solar panel in a partially shaded area will aect the power generation eciency

and cause overcurrent, which can damage components.

• Moisten a soft cloth with clean water and wipe the surface to clean the solar panel.

• Make sure the input voltage of the car power port is within 12-30 V and the maximum

input current is lower than 8 A. Otherwise, it may cause abnormal performance or

even damage to the power station.

• Make sure that the power adapter is securely connected to the car power port and

that the car engine is started before recharging.

Car Recharging

DJI Power Car Power Outlet to SDC Power Adapter can be used to connect a car power port to

the SDC port (or SDC Lite port) of the power station for car recharging.

MAX 24W MAX 140W

POWER 1000

1200

600

USB-C Recharging

DJI Power 500 can be recharged using a USB Power Delivery charger via the USB-C port for a

maximum recharge power of 100 W. It also supports simultaneous power input, where two

USB-C ports can be utilized to charge at a max of 200 W.

Loading ...

Dji POWER 500