Dji POWER 500 User Manual

Loading ...

DJI Power 1000/500 User Manual

Solar Recharging

The power station can be connected to solar panels using the DJI Power Solar Panel Adapter

Module (MPPT) or DJI Power Car Power Outlet to SDC Power Cable for solar recharging. Both

accessories are sold separately.

Take DJI Power 1000 as an example, follow the steps bellow for solar recharging:

1. Unfold the solar panel, support it with the prop, and align the panel to face towards the

sunlight. Adjust the angle of the support prop. It is recommended that the surface of the

solar panel is perpendicular to the sunlight. Make sure that the solar panel is not covered by

any obstructions.

2. Connect the solar panel using a XT60 cable to the solar panel adapter module to begin

recharging.

• Follow the instructions to use the solar panel. DO NOT mix solar panel types.

Otherwise, the device may become damaged.

• Up to three solar panels can be connected to the adapter module and used in parallel

(cannot be used in series). DJI Power 1000 can connect two solar panel adapter

modules and up to six solar panels for solar recharging. DJI Power 500 can connect

one solar panel adapter module and up to three solar panels for solar recharging.

• DJI Power Car Power Outlet to SDC Power Cable allows one solar panel to be

connected for solar recharging. The maximum current of the solar panels should be

lower than 10 A and the power output should be lower than 100 W.

• It is recommended to use DJI authorized Zignes solar panels. If non-recommended

solar panels are used, make sure the solar panels meet all the following requirements

in order to avoid damaging the solar panel adapter and the power station:

90°

MAX 24W MAX 140W

POWER 1000

1200

600

Loading ...

Dji POWER 500