Hikvision DS-2TD2117-3/PI User Manual

Loading ...

Steps

Go to Conguraon → System → System Sengs → RS-232 .

Set RS-232 parameters to match the device with computer or terminal.

Click Save.

10.12 Set RS-485

RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data

between the device and the computer or terminal when the communicaon distance is too long.

Before You Start

Connect the device and computer or terminal with RS-485 cable.

Steps

The

funcon varies according to dierent camera models.

Go to Conguraon → System → System Sengs → RS-485 .

Set the RS-485 parameters.

Note

●

You should keep the parameters of the device and the computer or terminal all the same.

●

If the PTZ Protocol is selected as modbus-RTU, the temperature informaon can be

transferred by RS-485 interface.

●

In modbus-RTU, you can select CRC Response Transmission as Big-Endian or

Lile-Endian.

Click Save.

10.13 Set Same Unit

Set the same temperature unit and distance unit. When you enable this funcon, the unit cannot

be congured separately in other seng pages

Steps

Go to Conguraon → System → System Sengs → Unit Sengs .

Check Use Same Unit.

Set the temperature unit and distance unit.

Click Save.

10.14 Security

You can improve system security by seng security parameters.

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD2117-3/PI Thermal Network Bullet Camera