Loading ...
Loading ...
Loading ...
CARE AND MAINTENANCE
DRAINING YOUR ICE MAKER
Carefully move the ice maker towards a sink or other suitable location for
draining.
1.
Remove the water drain plug located at the side of the ice maker to drain
all the water.
2.
Let the water drain from the drain plug.3.
Firmly install the rubber drain plug into the drain port.4.
WARNING: Do not tip the unit over while there is water in the reservoir.
Water
Drain Plug
CLEANING YOUR ICE MAKER
EXTERIOR - The outside of the ice maker should be cleaned regularly with a mild detergent solution, warm water,
and use the soft cloth to wipe. Do not use hard cloth to avoid scratching or damaging the surface of the unit.
INTERIOR - This ice maker is equipped with a cleaning mode that ensures your ice is clean and fresh. This
program works the same as the ice making process, only without the freezing.
Unplug the ice maker.1.
Create a solution of one part vinegar to ten parts water and pour it into the water reservoir.2.
Plug in the unit. Once it enters Standby Mode, press the Clean Button. The unit will automatically enter Cleaning
Mode, which lasts approximately 7 minutes. During this process, the CLEANING indicator light will be illuminated
as the inside parts are rinsed several times.
3.
After the Cleaning Mode is completed, turn off the unit and unplug it.4.
Drain out the water by removing the water drain plug cap located on the side. Once the water reservoir is empty,
install the water drain plug.
5.
Add fresh water to the water reservoir up to the MAX water level.6.
Plug in the unit and initiate the Cleaning Mode again. Once the program completes, drain out the water.7.
Dry the interior and exterior of the unit with a soft, clean cloth.8.
Install the water drain plug and tighten it securely.9.
NOTE: When using the unit for the first time or have not used for a long time, we suggest the above program to be
performed first.
Loading ...
Loading ...