Loading ...
Loading ...
Loading ...
6
•Always be sensitive to the slightest gas odor. If
you continue to detect any gas odor, no matter how
small, treat it as a serious leak. Immediately go into
action as discussed previously.
•
WARNING
ATTENTION - Critical Points to
Remember!
•Propane (LP) gas has a distinctive odor. Learn to
recognize these odors. Reference Fuel Gas Odor
and Odor Fading sections above.
•Even If you are not property trained in the service
and repair of the heater, ALWAYS be consciously
aware of the odors of propane (LP) gas and
natural gas.
•If you have not been properly trained in repair
and service of propane (LP) gas then do not at-
tempt to light heater, perform service or repairs,
or make any adjustments to the heater on the
propane (LP) gas fuel system.
•A periodic sni test around the heater or at the
heater’s joints; i.e. hose, connections, etc., is
a good safety practice under any conditions. If
you smell even a small amount of gas, CONTACT
YOUR FUEL GAS SUPPLIER IMMEDIATELY. DO
NOT WAIT!
PROPANE CYLINDERS
• Never ll the propane cylinder beyond 80 per-
cent full. An overlled or improperly stored cylinder
is a hazard due to possible gas release from the
safety release valve. If not followed exactly, a re
causing death or serious injury may occur.
• Only use a propane cylinder that includes a col-
lar to protect the cylinder valve.
• If a leak is detected at any time, get away from
the propane cylinder and call the re department.
• Do not use the product until leak-tested.
• Propane cylinders must be stored outdoors out
of reach of children and must not be stored in a
building, garage, or any other closed in area.
• Propane cylinder must be located outdoors dur-
ing operation except during construction or ren-
ovation of buildings not occupied by the public.
• Do not operate in altitudes above 2000'.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
SPECIFICATIONS
Cat. No. ....................................0801-20, 0801-20C
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature ...................... 0°F to 80°F
Volts................................................18 DC / 120 AC
Amps ..................................................1.7 A / 0.25 A
Hz ........................................................................60
Output Rating .......................... 30,000-70,000 BTU
Regulator Output ...........................................10 psi
Min./Max. Supply Pressure............. 20 psi - 200 psi
Fuel Source ....................................... Propane (LP)
FUNCTIONAL DESCRIPTION
3
7
8
4
11
2
5
6
1
9
10
12
1. ON/OFF switch
2. Handle
3. Heat outlet
4. Ignition button
5. Temperature control
knob
6. Hose wrap cleat
7. Fan
8. Battery bay
9. Power cord inlet
10. Propane (LP) inlet
11. Hang tag
12. Propane (LP) hose
and regulator
Loading ...
Loading ...
Loading ...