Loading ...
Loading ...
Loading ...
HEDGE TRIMMER ATTACHMENT — HTA2000/HTA2000-FC/HTA2020/HTA2020-FC30
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Hedge trimmer
doesn’t work.
◾
The battery pack is not
attached to the power head.
◾
Attach the battery pack to the power
head.
◾
No electrical contact between
the trimmer and battery.
◾
Remove battery, check contacts and
reinstall the battery pack.
◾
The battery pack is depleted.
◾
Charge the battery pack.
◾
The lock-off button is not
pressed before pressing the
trigger switch.
◾
Press down the lock-off lever and hold
it, then press the trigger to turn on the
hedge trimmer.
◾
The battery pack or power
head is too hot.
◾
Allow the battery pack or power head
to cool until the temperature drops
below 152°F (67°C).
◾
The blade is jammed.
◾
Remove the battery pack from the tool.
Remove the obstruction carefully and
then reinsert the battery and restart
the tool.
◾
The hedge trimmer is not well
connected with the power
head.
◾
Disconnect the hedge trimmer from the
power head. Reconnect them following
the section “CONNECTING THE HEDGE
TRIMMER ATTACHMENT TO THE
POWER HEAD” in this manual.
Excessive
vibration or
noise.
◾
Dry or corroded blades.
◾
Lubricate the blades.
◾
Blades or blade support is bent.
◾
Replace with a new blade or support
following the section “REPLACING THE
BLADE” in this manual or contact EGO
service center for replacement.
◾
Bent or damaged teeth.
◾
Replace with a new blade following
the section “REPLACING THE BLADE”
in this manual or contact EGO service
center for replacement.
◾
Loose blade bolts.
◾
Tighten the blade bolts. Using a hex
wrench (not included), turn the bolt
clockwise to tighten.
Loading ...
Loading ...
Loading ...