Loading ...
Loading ...
Loading ...
4
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Selecting the Proper Cable
Dierent size and types of cables are available for
dierent applications. Remove the protective tip
cover from new cables before use.
Cat. No. Description
48-53-2852 7/8" x 15' All Purpose Open Wind Sectional Cable
48-53-2851 1-1/4" x 15' All Purpose Open Wind Sectional Cable
48-53-2854 1-1/4" x 15' Heavy Duty Open Wind Sectional Cable
Cable Attachments for Use with
MILWAUKEE Coupling Cables
Cat. No.
Description
7/8" 1-1/4"
48-53-3830 48-53-4830 Straight Auger
48-53-3831 48-53-4831 Funnel Auger
48-53-3832 48-53-4832 3" Root Cutter
48-53-3833 48-53-4833 4" Root Cutter
48-53-3834 48-53-4834 6" Root Cutter
48-53-3835 48-53-4835 Small Opening Tool
48-53-3836 48-53-4836 Medium Opening Tool
48-53-3837 48-53-4837 3" Chain Knocker
48-53-3838 48-53-4838 4" Chain Knocker
48-53-3840 48-53-4840 Head Attachment Kit
CAUTION
To prevent damage to the cable and
attachments, do not use in larger
diameter pipes.
Cable Attachment Installation
To install the attachment:
Snap the attachment coupler into the cable coupler.
Test the cable before inserting into the drain to make
sure the attachment does not fall o during use.
To remove the attachment:
Insert the pin key into the coupling hole and pull at-
tachment o of cable.
Connecting/Disconnecting Sectional Cables
Keep the cable couplings clean and lubricated. The
pin key must move freely and fully extend to secure
the connection.
To connect the sectional cables, slide the two cable
couplings together. Make sure the connection is secure.
1 2
To disconnect the sectional cables, insert the pin
key into the coupling hole and pull the cables away
from each other.
FUNCTIONAL DESCRIPTION
1. Lever arm
2. Carry hook
3. Feed collar
4. Cable hook
5. Handle release button
6. Telescoping handle
7. Lever arm collar
1
8
3
4
2
5
9
10
7
8. ONE-KEY™ indicator
9. Forward/O/Reverse
10. Battery door
11. Rear guide hose
connection
6
11
SPECIFICATIONS
Cat. No. ..................................................... 2871-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
No Load RPM ....................................................700
Module/FCC ID ..................... BLE113/QOQBLE113
Cable Sizes ........................................ 7/8" & 1-1/4"
Recommended Pipe Diameter ........................2"-8"
Recommended Ambient
Operating Temperature .................... 0°F to 125°F
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, unlatch the battery door, push
in the release buttons and pull the battery pack away
from the tool. Close and relatch the battery door.
WARNING
Always lock the trigger or remove
the battery pack any time the tool
is not in use.
To insert the battery, unlatch the battery door and slide
the pack into the body of the tool. Make sure it latches
securely into place. Close and relatch the battery door.
Loading ...
Loading ...
Loading ...