Loading ...
Loading ...
Loading ...
Chapter 77 Port Authentication
XGS2220 Series User’s Guide
595
Figure 478 SECURITY > Port Authentication > Compound Authentication Mode (Stacking Mode)
The following table describes the labels in this screen.
77.6 Technical Reference
This section provides technical background information on the topics discussed in this chapter.
Table 313 SECURITY > Port Authentication > Compound Authentication Mode
LABEL DESCRIPTION
SLOT This field appears only in Stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number. In Stacking mode, the first number represents the slot ID and
the second is the port number. Please note that the default stacking ports (the last four ports of
your Switch) cannot be configured. They are reserved for stacking only.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Compound
Authentication
Mode
Specify how the Switch authenticates clients for network access.
Select Strict to allow network access to clients only when clients passes IEEE 802.1x
authentication AND MAC authentication at the same time.
Select Loose to allow network access to clients when clients passes IEEE 802.1x authentication
OR MAC authentication.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Loading ...
Loading ...
Loading ...